What is the difference between pure electric vehicles and hybrid vehicles?

Why Was the Pajero Discontinued?

The reasons for the discontinuation of the Pajero are as follows: 1. Outdated product capabilities: The Pajero has always been equipped with the aging 3.0L+5AT powertrain, with a maximum horsepower of only 174. Crucially, Mitsubishi could have used a more powerful engine for the Pajero, specifically the 3.0L engine from the new Pajero Sport, which delivers 209 horsepower and 291N·m of torque. 2. Falling behind mainstream trends: In terms of exterior and interior design, the Pajero only received minor updates. For enthusiasts, this design may evoke nostalgia, but for the majority of consumers, it simply feels outdated. The single infotainment system, traditional design style, and dated interior configurations further contributed to its decline. 3. Ambiguous positioning: The Pajero was positioned as an all-terrain SUV, offering better off-road performance than typical urban SUVs, while its monocoque body ensured superior comfort. However, with advancements in electronic systems, the off-road capabilities of urban SUVs have continuously improved, making them sufficient for general travel needs. Additionally, due to the Pajero's weak body rigidity and relatively short suspension travel, it was unable to handle high-intensity off-road conditions.

16

1

Share

What Causes the BMW 530 Engine to Shake at Idle?

Idle shaking may be caused by severe engine carbon buildup, ignition system issues, or unstable oil pressure. The specific reasons are as follows: 1. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is then sucked into the cylinder by the engine's vacuum and burned, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes the engine to shake at idle after a cold start. The lower the temperature, the more fuel is needed for a cold start, and the presence of carbon deposits significantly affects whether the cold start proceeds smoothly. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak spark plug firing can also lead to such symptoms. 3. Unstable oil pressure: If you have already cleaned the engine carbon deposits, serviced the throttle body, replaced the gaskets and spark plugs, but still notice shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or faulty readings and performance of the intake pressure sensor can both cause the car to shake. 4. Aging engine components: Car shaking can also be related to worn engine mounts (also known as engine mounts). Engine mounts act as the engine's shock absorption system, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and the cabin, causing shaking at idle.

15

3

Share

Should the Maxus G10 use 92 or 95 octane gasoline?

The Maxus G10 should use 92 octane gasoline, as this fuel grade is recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, the Maxus G10 also indicates it on the fuel tank cap. The required gasoline grade can usually be determined by the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade, as high compression ratio engines can also be tuned to use lower octane gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Maxus G10 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the tank is empty. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using a higher octane grade will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using a lower octane grade can cause engine knocking. The significantly lower octane number reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on the piston and cylinder, potentially leading to cylinder scoring in severe cases.

13

1

Share

What is the displacement of the 4D26 engine?

The displacement of the Quanchai 4D26 engine is 2.59L. Below are the specific details about Quanchai engines: 1. Series and Power: Quanchai engines currently mainly include the 4A, 4B, and 4F series of National IV engines, as well as the 4D22E, 4D18E, 4D25, 4D26, 4D18F, and 422F series of National III diesel engines. The power of diesel engine products ranges from 15 to 380 horsepower. 2. Features: Quanchai engines are entirely fueled by diesel. They use a special type of internal combustion engine where the fuel burns inside. There are many types of internal combustion engines, with common gasoline and diesel engines being typical examples.

9

4

Share

How Often Should Polishing and Waxing Be Done?

Polishing and waxing should be done every 3 to 6 months. Both polishing and waxing can maintain the car's appearance and repair minor scratches. Very fine scratches, such as hairline scratches, can be removed by waxing. For relatively more severe scratches, polishing is needed to remove them. Relevant information is as follows: 1. Function: Waxing can serve as a polishing agent. When minor scratches appear on the car, sand wax can be used to polish and remove the scratches. Sand wax contains special abrasive particles that can easily and safely remove the oxidation film, fine scratches, spots, and stubborn stains on the car's surface, restoring the original charming luster and long-lasting beauty to the old, faded, and dull paint layer. 2. Repair: Polishing is a consumable repair method. Minor scratches can be repaired by polishing. By rotating the polishing disc, the oxidation layer, scratches, and stains on the car's paint surface can be polished, restoring the paint surface to a smooth and shiny state. A small amount of polishing is fine, and the car paint can withstand it.

11

5

Share

What does TEMP mean in car air conditioning?

Car air conditioning TEMP represents temperature. Here is the relevant introduction: 1. Brief introduction: temp is the abbreviation of temperature, meaning temperature, and is the button for adjusting the heating and cooling temperature of the air conditioner. 2. Air conditioning: Air conditioner (Air-Conditioner), that is, an air conditioning device, refers to equipment that artificially adjusts and controls parameters such as temperature, humidity, cleanliness, and air flow in the environment of buildings/structures. Most of them use refrigerant to evaporate or condense under the action of a compressor, thereby causing the surrounding air to evaporate or condense to achieve the purpose of changing temperature and humidity.

1

5

Share

What is the difference between pure electric vehicles and hybrid vehicles?

Why Was the Pajero Discontinued?

What Causes the BMW 530 Engine to Shake at Idle?

Should the Maxus G10 use 92 or 95 octane gasoline?

What is the displacement of the 4D26 engine?

How Often Should Polishing and Waxing Be Done?

What does TEMP mean in car air conditioning?

Where is the crankshaft mark on the 4D24 engine?

Where is the charging port of the Arrizo 5 located?

What Causes Weak Airflow from Car Air Conditioning Vents?

What Causes White Debris to Blow Out When the Car Air Conditioner is Turned On?