What is the difference between professional factory and original factory?

1 Answers
DeAaliyah
07/30/25 12:56am
Here are the differences between professional factory and original factory: 1. Differences: Original factory refers to parts designated by the manufacturer, which are of guaranteed quality and relatively better performance, but also more expensive. Avoid small repair shops as they may not provide genuine parts. Even in larger repair shops, it's advisable to opt for the more expensive so-called 'original factory parts'. If you've bought a car, it's best to get it serviced at a 4S shop. Professional factories, on the other hand, are ordinary external factories that provide necessary parts, but the quality may have some issues. 2. Factory parts: Original factory parts mainly come from the main factory and 4S shops, with packaging bearing the brand's factory logo. Professional factory parts are not primarily sourced from the main factory or 4S shops.
Was this review help?
20
4
Share
More Forum Discussions

Which 2010 LaCrosse model uses an Aisin transmission?

Aisin transmission is the gearbox brand used in the 2.0T version of the 2010 LaCrosse. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the highest market share in this field globally. The 2.0T version of the 2010 LaCrosse is equipped with either a 6-speed automatic manual transmission or a 6-speed manual transmission. The automatic manual transmission features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT gearbox with added manual shifting functionality, designed to enhance the driving pleasure of automatic vehicles. For the 2.0T version of the 2010 LaCrosse, the following points should be noted during daily use: Do not delay transmission oil changes for extended periods. While many modern vehicles claim maintenance-free transmission oil, this does not mean it never needs replacement. Prolonged use without changing the oil can damage internal components such as bearings and the transmission casing. Avoid prolonged coasting in neutral. Many experienced drivers of manual vehicles coast in neutral, but for automatic transmissions, this can cause overheating and create a jolt when shifting back to D. Never shift into D/R before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to demonstrate smooth operation, but this severely damages transmission gears and can lead to gear grinding over time. Avoid frequent steep hill climbs in D. When facing steep inclines, automatic vehicles may overheat due to high loads or shift prematurely, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow over long distances. If the automatic vehicle breaks down, use a flatbed tow truck with the vehicle in N to move it onto the platform. Never use a tow rope or drag the vehicle directly.
8
2
Share

What brand of engine does Foton use?

Foton Tunland uses the engine model 4F20TC3, with a maximum horsepower of 150, a maximum power of 110KW, a maximum power speed of 3500rpm, and a peak torque of 330N.m. Foton GAT ix5 uses the engine model DAM15DL, with a maximum horsepower of 116, a maximum power of 85KW, a maximum power speed of 6000rpm, and a peak torque of 150N.m. The engine of Foton GAT ix5 is produced by Beijing Foton Engine Plant of Beiqi Foton Motor Co., Ltd. The 4JB1TDi power introduced by Foton Tunland is a high-pressure common rail diesel engine developed and manufactured by Beijing Foton Engine Plant using Isuzu's advanced technology. For the daily maintenance of Foton engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and still bring dirt back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
8
4
Share

What items are replaced during the first vehicle maintenance?

The first maintenance at a 4S dealership includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the levels of various fluids to ensure they are normal, inspecting the generator belt and wiper blades for any damage; verifying the tire pressure is correct and checking for uneven wear, bulges, or other damage to the tires; examining the chassis components, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches or damage; testing all vehicle switches; and ensuring all lights are functioning properly. Estimated time required: approximately 2 hours to complete all tasks. Items to bring for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; and the vehicle purchase invoice. Take these to the designated first maintenance facility for the service. Important note: make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, typically after driving 1,000 to 3,000 kilometers. It is crucial to attend the first maintenance on time—neither early nor delayed. Completing the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven at standard loads and normal speeds as required by the manufacturer. The first maintenance period is calculated from the date of vehicle pickup and is determined by two indicators: mileage and time, whichever comes first. Here are the essential inspections and replacements that must be completed during the first maintenance of a new car: changing the engine oil and cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is within the normal range; inspecting the brake and clutch fluid levels; verifying the power steering fluid level and checking for any leaks at the fluid line connections; examining the generator, air conditioning, water pump, and belts for aging and tension; and checking tire pressure and wear condition, adjusting air pressure or rotating tires if necessary. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, using water to wash the body and wiping it with a cloth. It is important to note that the interior of the car should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to scrub with a brush and detergent, then dry before replacing. The rubber floor mats in the driver's cabin have many drainage holes underneath. Water entering these areas will not dry naturally but may flow through the holes to components like the transmission, causing corrosion. The best practice is to use a vacuum cleaner followed by a damp cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the antifreeze level is low, it is recommended to drain the existing antifreeze and refill with the same brand. Different brands of antifreeze have varying chemical properties, and their corrosion inhibitors may react negatively when mixed, leading to potential issues. Always use the same brand to avoid unnecessary complications. Do not lubricate wheel bolts and nuts: When bolts on a car become rusty, some may apply oil to restore functionality. However, lubricating wheel bolts and nuts can pose a safety risk. At high speeds, lubricated bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) vehicle: EFI vehicles differ from conventional cars in that their fuel injection control system automatically adjusts the fuel supply based on the engine's temperature and operating conditions, ensuring smooth startup without pressing the accelerator.
4
5
Share

What does the exclamation mark mean in a BYD car?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or that the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors, yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system that is not very severe. Reduce speed and proceed to a repair point to eliminate potential safety hazards. Red indicates a very serious issue in the corresponding system. If this occurs, do not continue driving. Pull over safely and seek professional assistance immediately to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect the car and eliminate safety hazards.
20
3
Share

What is the emission standard of the Volkswagen Santana?

Volkswagen Santanas produced after 2011 comply with the China IV emission standard, while most Santanas manufactured before 2010 meet either China II or China III emission standards. The Santana, known as the Volkswagen Santana, features a boxy design with squared-off headlights and taillights. It offers excellent ride comfort and a spacious interior. The Santana is equipped with a longitudinally mounted engine, with most models housing a 1.8-liter naturally aspirated engine that delivers robust performance, along with outstanding reliability and durability. The Santana is a brand of cars produced by Volkswagen in California, USA.
17
1
Share

What is the emission standard for the 2019 Magotan and Sagitar?

The 2019 Magotan and Sagitar meet the China V emission standard. The China V automobile emission standard refers to the fifth-stage national standard for motor vehicle pollutant emissions. Compared to the China IV emission standard, the implementation of the China V standard reduces nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles, effectively lowering vehicle pollutant emissions and contributing to environmental protection. The Sagitar brand was jointly established by Volkswagen AG and FAW in 2006. The first-generation Sagitar was a new A-class sedan introduced by FAW-Volkswagen, which was originally developed by Volkswagen for the North American market.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.