What is the difference between practicing with C1 and C2 vehicles?

What Causes High Oil Pressure?

The reasons for high oil pressure: 1. The oil grade selected is unreasonable, such as using summer oil in winter, which not only makes starting difficult but also affects the operation of the lubrication system; 2. The oil filter or main oil passage is blocked, and the opening pressure of the return valve is too high; 3. During engine overhaul, the fit clearance of the crankshaft and connecting rod bearings is too small, hindering oil return and causing excessively high oil pressure; 4. Nozzle blockage reduces or stops oil spray, leading to excessive pressure; 5. After repair, the clearance of crankshaft bearings, connecting rod bearings, or camshaft bearings is too small, making it difficult for lubricating oil to enter the friction surfaces and causing excessive pressure in the main oil passage. Oil, or engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine.

17

1

Share

How to Change the Transmission Fluid for an Accord?

The method for changing the transmission fluid of an Accord is as follows: 1. Unscrew the transmission fluid drain plug at the bottom of the engine to drain the transmission fluid from the engine, using a pan to catch the drained fluid below; 2. Open the driver's side door of the car; 3. Pull the hood release lever located on the left side of the car; 4. Lift up the car's engine hood; 5. Use the support rod to secure the car's hood to prevent any hazards; 6. Unscrew the plastic cover of the car's transmission and add transmission fluid; 7. Ensure the fluid level is between the upper and lower marks on the dipstick. Taking the 2021 Accord as an example, it is a mid-size sedan with body dimensions of: length 4893mm, width 1862mm, height 1449mm, and a wheelbase of 2830mm.

5

0

Share

Can I Get a Driver's License After 60?

You can obtain a driver's license after the age of 60. The age requirements for obtaining a driver's license are as follows: 1. For small cars, small automatic transmission cars, and light motorcycles, the applicant must be between 18 and 70 years old; 2. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. Applicants for a motor vehicle driver's license must meet the driving license conditions stipulated by the public security department of the State Council. After passing the examination, the traffic management department of the public security organ will issue the corresponding category of motor vehicle driver's license. Drivers should drive motor vehicles according to the vehicle types specified on their driver's licenses and must carry their driver's licenses with them when driving.

2

5

Share

What is the minimum ground clearance of the 2018 Sylphy?

The minimum ground clearance of the 2018 Sylphy is 115mm, which reflects the vehicle's ability to pass over obstacles or uneven ground without collision. The 2018 Sylphy is a compact car with body dimensions of 4665mm in length, 1700mm in width, and 1505mm in height, a wheelbase of 2700mm, a fuel tank capacity of 52 liters, and a curb weight of 1160kg. The 2018 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 124PS, a maximum power of 91kW, and a maximum torque of 153Nm, paired with a 5-speed manual transmission.

14

1

Share

Can New Cars Not Go on Long-Distance Trips?

New cars can go on long-distance trips, but the following items need to be checked before the trip: 1. Brake system - check if the brake pads are too thin; replace them if they are thinner than 2mm; 2. Check the tires for cracks; replace them if cracks are found; 3. Inspect the condition of the vehicle's headlights, brake lights, turn signals, fog lights, and reverse lights; 4. Verify that the engine oil is within the specified range; 5. Check the vehicle's electronic control system. Precautions for long-distance trips include: 1. Do not drive continuously for more than two hours; 2. Avoid frequent hard braking; 3. Prepare necessary tools for the trip; 4. Pay attention to adjusting the in-car temperature.

10

0

Share

What is the size of car wheel bolts?

Car wheel bolt sizes include: 17mm, 19mm, 21mm, 22mm. Wheel bolts refer to the bolts installed on the hub that connect the wheel, brake disc (brake drum), and the hub. The function of wheel bolts is to reliably connect the wheel, brake disc, and hub together. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit the torque of traction and braking, ensuring the adhesion between the wheel and the road surface; 3. To reduce and absorb the vibrations and impact forces during driving, preventing severe vibrations and early damage to car components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency.

2

Share

What is the difference between practicing with C1 and C2 vehicles?

What Causes High Oil Pressure?

How to Change the Transmission Fluid for an Accord?

Can I Get a Driver's License After 60?

What is the minimum ground clearance of the 2018 Sylphy?

Can New Cars Not Go on Long-Distance Trips?

What is the size of car wheel bolts?

How to Turn on the Heater in the Encore?

What are the symptoms of a faulty stabilizer bar ball joint?

What is the engine model of the Volkswagen T-Roc?

What does Mercedes-Benz B-Class maintenance include?