What is the difference between pearlescent white and pearl white car paint?

1 Answers
ClaytonLee
07/29/25 7:19pm
The difference between pearlescent white and pearl white car paint lies in the material, cost, and light transmission. Pearl white and pearlescent white are two different types of car paint. Pearl white paint contains fluorescent powder inside, which reflects bright fluorescent particles under sunlight, while pearlescent white paint does not have fluorescent powder and appears pure white from inside to out, without emitting fluorescent particles under sunlight. Material: White paint is a solid color paint and cannot be made into metallic paint due to its natural properties, so it does not emit fluorescent powder under sunlight. On the other hand, pearl white paint contains pearl powder, making it appear brighter and more premium under sunlight compared to regular paint. Cost: Pearl powder is much more expensive than regular paint, and combined with the manufacturing process, pearl white paint generally costs more than standard white car paint. Light transmission: Pearl white paint emits a sparkling glow under sunlight. Compared to pearlescent white, pearl white has better transparency. The production process of pearl white paint is relatively complex, making it more expensive than pearlescent white.
Was this review help?
16
1
Share
More Forum Discussions

What maintenance is required after a car has run 25,000 kilometers?

Maintenance items for a car that has run 25,000 kilometers include: 1. Changing the engine oil, oil filter, air filter, and cabin air filter; 2. Cleaning the throttle body and rotating the tires; 3. Checking all fluid levels to ensure they are at standard positions; 4. Inspecting the tightness of chassis screws; 5. Verifying that all lights are functioning properly; 6. Checking tire pressure and brake pad condition. The benefits of maintenance include: 1. Ensuring the vehicle maintains optimal performance; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Maintaining a clean vehicle appearance and preventing damage.
19
1
Share

How Often Should Car Engine Oil Be Changed?

Car engine oil change intervals vary depending on the type of oil: 1. Conventional oil should be changed approximately every 5,000 kilometers or every 6 months; 2. Semi-synthetic oil should be changed approximately every 7,500 kilometers or every 9 months; 3. Fully synthetic oil should be changed approximately every 10,000 kilometers or every year. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine components; 4. To cushion the pressure rise in the engine cylinder ports; 5. To clean away dirt generated on the surfaces of engine components.
19
1
Share

What are the reasons for a car battery not holding charge?

Car battery not holding charge reasons are: 1. Incompatible rectifier; 2. Damaged generator coil; 3. Poor connection between rectifier and battery or fuse wiring; 4. Battery self-discharge due to damage; 5. Whole vehicle circuit malfunction or self-discharge after turning off ignition; 6. Prolonged vehicle inactivity causing battery discharge. Functions of car battery: 1. Provides power to starting system, ignition system and electronic fuel injection system when starting engine; 2. Powers vehicle electrical equipment when engine is off or at low idle; 3. Assists in powering electrical devices when alternator output is insufficient; 4. Absorbs voltage spikes in electrical system, protecting electronic components; 5. Stores excess electricity generated by alternator.
13
1
Share

How to Remove the Steering Wheel on a 7th Generation Accord?

To remove the steering wheel on a 7th generation Accord, follow these steps: 1. Disconnect both positive and negative battery cables, remove the lower inspection cover under the steering wheel, then disconnect the short connector; 2. Disconnect the connector between the airbag and spiral cable, and connect the short connector to the airbag side connector; 3. Remove the right inspection cover and the cruise control set/resume switch cover; 4. Remove two bolts, then remove the driver-side airbag assembly; 5. Disconnect the connectors from the horn and cruise control set/resume switch, then remove the cable reel connector from the clip; 6. Remove the steering wheel nut.
18
3
Share

Why Did the Car Ignition Coil Fail?

Car ignition coils fail due to the following reasons: 1. Excessive generator output, causing the ignition coil to overload and burn out; 2. Poor fuel quality; 3. Incorrect cylinder compression ratio; 4. Program failure in the computer board; 5. Unstable power supply voltage; 6. Abnormal resistance in the high-voltage wires; 7. Excessive primary current from the ignition controller leading to overheating of the ignition coil; 8. Malfunctioning ignition module. Symptoms of a failed ignition coil include: 1. The corresponding cylinder of the ignition coil will not operate, resulting in rough idling, weak acceleration, inability to increase fuel, and the check engine light turning on; 2. Power interruption during acceleration causing weak and shaky acceleration; 3. When a cylinder misfires, the air-fuel mixture in that cylinder will not ignite and will be expelled through the exhaust pipe, potentially clogging the catalytic converter's pores and causing catalytic converter failure.
8
1
Share

What is the Principle of Disc Brakes?

Disc brakes work on the principle that when braking, hydraulic oil is pumped into the inner and outer wheel cylinders, and the pistons, under hydraulic pressure, press the two brake pads against the brake disc, generating friction torque to achieve braking. Disc brakes can be hydraulic, controlled by hydraulic pressure, with main components including the brake disc, wheel cylinder, brake caliper, and oil pipes. Disc brakes offer advantages such as rapid heat dissipation, light weight, simple construction, and easy adjustment. The function of brakes is to reduce speed or bring the vehicle to a stop. Their working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby slowing down or stopping the vehicle.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.