What is the difference between passing the Subject 2 test in one attempt versus two attempts?

1 Answers
OJohnny
07/30/25 8:30am
The main difference between passing the Subject 2 test in one attempt versus two attempts is the time taken. Passing in one attempt takes slightly less time than passing in two attempts, with no other differences. Here is an introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1 and C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Below are some tips for practicing at driving school: 1. Practice as much as possible: Some people are inconsistent with their practice, skipping days here and there. This approach is not effective—aim for more practice time. 2. Memorize the techniques: Firmly remember the techniques taught by the instructor, as these are essentially shortcuts that prove very useful. 3. Learn from experienced drivers: Seek advice from those around you who are skilled drivers to deepen your understanding. Only with proper understanding can you drive well. 4. Follow the rules strictly: What the instructor teaches may differ from common practices, but during training, everything is methodical—strict adherence is crucial. 5. Think and reflect: If a technique isn’t executed perfectly at first, there’s still room for improvement. Reflect on why it didn’t go well to make better progress.
Was this review help?
19
1
Share
More Forum Discussions

What engine does the Audi S3 use?

The Audi S3 uses a Volkswagen engine with the model designation EA888. The Audi S3 is equipped with a high-performance 2.0TFSI engine, delivering a maximum power output of 300 horsepower and a peak torque of 380 Nm, paired with a 6-speed dual-clutch transmission. For daily maintenance of the Audi S3 engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil will degrade over time with use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil regularly based on usage conditions and maintain the proper oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger quantities precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of both the radiator and the engine.
10
4
Share

What are the Volkswagen engine models?

Volkswagen engine models include: EA211, EA111, EA113, EA888, EA390. These engines incorporate advanced technologies such as direct fuel injection and turbocharging, offering performance advantages like small displacement, high power, and low fuel consumption. Here are the detailed introductions: 1. The EA211 engine is an upgraded version based on the EA111, launched at the 2012 Geneva International Motor Show. This engine series includes three-cylinder and four-cylinder products, with the Volkswagen UP being the first model equipped with this series. Due to the cylinder deactivation system used in the four-cylinder engines, its fuel economy has been highly praised by consumers. 2. The EA113 is an eight-valve engine, meaning two valves per cylinder: one intake and one exhaust. From a technical perspective, the EA113 is less advanced than the 16-valve EA111. The most notable feature of the EA113 engine is its cast iron cylinder block, which is robust and durable. Currently, models like the New Bora, Lavida, POLO, and Golf are equipped with the EA113 series engines. 3. The EA888 engine holds a very important position for the Volkswagen Group. It is widely used, with almost all 1.8TSI and 2.0TSI models across various brands under the Volkswagen Group, including Volkswagen, Audi, Skoda, and SEAT, being equipped with this engine. 4. The EA390 might be less familiar since it is an imported engine. The EA390 is part of the VR6 naturally aspirated engine series, available in different displacements such as 3.0L, 3.2L, and 3.6L. It features direct fuel injection technology, four valves per cylinder, and a very small engine angle (only 10°-15°), making it compact. The Volkswagen Teramont is equipped with the EA390 engine.
17
5
Share

Should You Replace or Repair Waterlogged Headlights?

In most cases, simply turning on the headlights and allowing the moisture to dissipate naturally is sufficient. However, if the water ingress is severe, it's necessary to visit a professional repair shop for treatment. More information about headlight water ingress is as follows: 1. Causes of headlight water ingress: Poor sealing design of the headlight itself, improper sealing between plugs and wiring harnesses, poor gap definition between the headlight and the vehicle body, or damaged vent holes can all lead to water ingress, especially during car washing or rainy weather. Typically, water accumulation inside the headlight can be visibly observed, and it does not disappear after 1-2 hours with the headlights on. 2. Distinguishing between fogging and water ingress in headlights: (1) First, check for water flow traces. Fogging usually forms a thin film or dew-like droplets on the surface of the headlight cover without any water flow traces. Water ingress, due to the larger amount of water, forms dew droplets that flow from the top to the bottom of the headlight, leaving distinct water flow traces, similar to a waterfall, much like the trail left by a snail. (2) Determine by whether it disappears on its own. When fog appears inside the headlight, it takes approximately 1 to 1.5 hours with the headlights on to completely dissipate. In a static state, storing the vehicle in a dry environment with humidity <50% for 24 to 36 hours will allow the fog inside the headlight to disappear completely on its own—this phenomenon is considered fogging. However, if large areas of fog condensation appear on the inner wall of the lens, condensing into water droplets that flow downward and accumulate inside the headlight, and when the headlights are used for extended periods or multiple times, the fog reattaches to the inner surface of the lens as the temperature rises, this should be identified as water ingress.
15
5
Share

What is the engine model of the CT5?

LSY is the engine model of the Cadillac CT5, with a maximum power of 174KW and a peak torque of 350 N·m. The Cadillac CT5 is a domestically produced joint-venture vehicle, and its engine is also domestically manufactured. For the daily maintenance of the Cadillac CT5's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil, but in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
19
0
Share

Can a car drive normally in second gear without accelerating?

Car can drive a certain distance in second gear without accelerating, but prolonged low RPM may cause damage to the engine. Here is detailed information about second gear: 1. Principle: When the car is in second gear, it limits the automatic shifting to lower gears to ensure maximum forward power. 2. Purpose: Second gear is a forward gear mainly used for going up or down slopes. The advantage is that when going up or down a slope, the vehicle will stably remain in 1st or 2nd gear, preventing the transmission from constantly shifting due to slope load or speed imbalance.
9
4
Share

Where is the heated mirror switch located on the Volvo S90?

Volvo S90's heated mirror switch is located on the vehicle's air conditioning control panel. Additional notes on using the rear window defroster are as follows: 1. Automatic shut-off feature: When the rear window defroster is activated, it will automatically turn off after reaching a certain temperature or operating for a certain duration. This function is designed to protect the internal heating elements. 2. Regular application of rain repellent: If the vehicle is frequently driven in rainy conditions, it's recommended to periodically apply rain repellent to both side mirrors and the windshield. This helps maintain better visibility for the driver.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.