What is the Difference Between Paint Protection Film and Crystal Coating?

What does 'rec' mean on a dash cam?

The 'rec' on a dash cam stands for 'recording', which means 'video recording' in English. Here is an extension about the functions of a dash cam: 1. Recording footage: Play back the recorded footage, which helps to reconstruct the accident scene in the event of a traffic accident, providing clues for the police to solve the case. For some hit-and-run phenomena, it can be used as evidence. 2. Recording routes: Record the route of a self-driving tour, adding fun. 3. Monitoring function: It can be used as a parking monitor to avoid damage to your car.

3

5

Share

How to Replace the Coolant in a Lavida?

Lavida vehicle coolant replacement method is as follows: Before completely replacing the coolant, conduct a thorough inspection first to check for any signs of leakage or cracks in all pipelines, with a focus on the five-way water pipe. The five-way pipe is named for its five interfaces connecting various parts, and the coolant is distributed to different parts of the car through the five-way pipe to function. If there is any sign of coolant leakage in this part, the water pipe should be replaced or the interface re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject clean water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out from the reservoir will be slightly pinkish. Continue injecting clean water until clear water flows out. Note: Remember to remove the heater hose and drain the water from the heater core. About one hour after draining, add the new coolant through the radiator hose to allow the coolant to flow quickly into the radiator. Then add another bucket of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, as some air is expelled from the cooling system, the liquid level will drop slightly. Add more coolant until it reaches the "MAXT" mark on the reservoir.

19

5

Share

Does Lower Car Air Conditioning Temperature Affect Fuel Consumption?

Lower car air conditioning temperature does affect fuel consumption; the lower the temperature setting, the more fuel is consumed. Here is a detailed explanation of how lower air conditioning temperature impacts fuel consumption: 1. Reason: The power for the air conditioning compressor comes from the engine. When the car's air conditioning temperature is set lower, the compressor requires more electricity, forcing the engine to consume additional fuel to meet this demand. Therefore, a lower air conditioning temperature indeed leads to higher fuel consumption. 2. Impact Factors: Fuel consumption is not affected by the fan speed. Semi-mechanical air conditioning systems can adjust their power within a certain range. Additionally, variable displacement air conditioning systems can determine the extent of fuel consumption.

13

0

Share

Will a car's air conditioning not cool if the sensor is broken?

The air conditioning can still cool even if the sensor in a small car is broken. Detailed introduction: The air conditioning cooling effect is still good, but the air volume is very small. In this case, replacing the air conditioning filter can solve the problem, as a dirty air conditioning filter prevents fresh air from being blown in. Specific situation: Initially, the air conditioning cooling effect is good, and the air volume is large. However, after driving for a while, the air volume decreases. This may be due to the failure of the air conditioning evaporator temperature sensor. The air conditioning evaporator is where heat exchange occurs. The refrigerant changes from liquid to gas inside the evaporator, and the liquid vaporization absorbs a large amount of heat from the surroundings, causing the evaporator temperature to drop. Outside air passes through the evaporator, and the air temperature decreases. When the evaporator temperature sensor fails, the vehicle's computer cannot control the compressor's start and stop, causing the compressor to keep working. This leads to frost formation on the evaporator, preventing outside air from passing through. As a result, the air volume from the car's air conditioning vents decreases. After the vehicle is turned off for a while, the frost on the evaporator melts, and the cooling effect can be restored. However, after driving for a while, the air volume from the air conditioning vents decreases again. In this case, replacing the evaporator temperature sensor may solve the problem.

2

4

Share

What Are the Maintenance Items for a Car with 100,000 Kilometers?

After driving 100,000 kilometers, car maintenance mainly involves replacing some wear-prone parts and fluids. Below are the specific maintenance items for a car with 100,000 kilometers: 1. Replacement of Wear-Prone Parts: The wear-prone parts on a car include belts, spark plugs, ignition coils, brake pads, brake discs, wipers, various filters, and tires. The replacement of metal wear-prone parts primarily depends on their wear condition, while the replacement of rubber wear-prone parts is due to the aging phenomenon that occurs after prolonged use. 2. Fluid Replacement: The fluids that should be considered for replacement in a car include brake fluid, engine oil, coolant, transmission fluid, and power steering fluid.

16

3

Share

What is the 0-100 km/h acceleration time for Tesla?

According to official data, the Tesla Model Y has a 0-100 km/h acceleration time of 3.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque essentially represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Tesla Model Y has a maximum torque of 10,000 Nm and a 0-100 km/h acceleration time of 3.7 seconds. The NIO has a maximum torque of 610 Nm and a 0-100 km/h acceleration time of 5.6 seconds. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Tesla Model Y uses a single-speed transmission for electric vehicles. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Tesla Model Y has a power-to-weight ratio of 139 Hp/T and a 0-100 km/h acceleration time of 3.7 seconds. The NIO has a power-to-weight ratio of 137 Hp/T and a 0-100 km/h acceleration time of 5.6 seconds.

16

1

Share

What is the Difference Between Paint Protection Film and Crystal Coating?

What does 'rec' mean on a dash cam?

How to Replace the Coolant in a Lavida?

Does Lower Car Air Conditioning Temperature Affect Fuel Consumption?

Will a car's air conditioning not cool if the sensor is broken?

What Are the Maintenance Items for a Car with 100,000 Kilometers?

What is the 0-100 km/h acceleration time for Tesla?

How many kilowatt-hours does Tesla consume per 100 kilometers?

What lights to use when driving at night without street lighting?

How is Tesla's waterproof performance?

What is the actual fuel consumption of the Kia Sportage 2.0?