What is the difference between paint protection film and ceramic coating?

1 Answers
Maximus
07/25/25 1:47am
Regarding the differences between paint protection film and ceramic coating, the details are as follows: 1. Material composition: The essence of paint protection film is a plastic film with special properties; the essence of ceramic coating is a chemical reagent mainly composed of crystallizable silicon dioxide. Both adhere to the car's paint surface to isolate it from the external environment, thereby protecting the paint. Paint protection film relies on toughness and self-repair for protection, while ceramic coating relies on absolute hardness. 2. Durability: High-quality ceramic coating products can last 1-2 years. New cars can be directly coated after cleaning, while older cars require polishing before coating. High-quality paint protection film can last up to 10 years, and it is mostly applied to new cars, with fewer applications on older vehicles.
Was this review help?
20
1
Share
More Forum Discussions

What are the three-guarantee regulations for 4S car tires?

4S car tire three-guarantee refers to warranty, replacement, and refund, with the following regulations: 1. After purchasing tires: If quality issues are found before actual use, new tires can be exchanged. For appearance quality issues, both parties can negotiate a solution. 2. During use: If quality issues are found, the compensation standard is calculated based on the wear depth of the tread pattern. The specific regulations are as follows: (1) If the remaining tread depth is more than 70%: Free replacement of new tires. (2) If the remaining tread depth is 60%-69%: Replace new tires at 30% of the factory price. (3) If the remaining tread depth is 50%-59%: Replace new tires at 40% of the factory price. (4) If the remaining tread depth is 40%-49%: Replace new tires at 50% of the factory price. (5) If the remaining tread depth is 30%-39%: Replace new tires at 75% of the factory price.
17
1
Share

Where is the windshield washer fluid reservoir located in the Audi Q3?

The windshield washer fluid reservoir in the Audi Q3 is located in the engine compartment, specifically at the lower right corner. The reservoir has a blue cap marked with a washer symbol. The capacity of the windshield washer fluid reservoir is 5L, and it should be filled appropriately based on the remaining amount. Windshield washer fluid is a consumable item and does not have a fixed refill cycle; it depends on the frequency of use by the owner. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, with body dimensions of 4484mm in length, 1856mm in width, and 1616mm in height, and a wheelbase of 2680mm. In terms of power, the Audi Q3 is equipped with a 2.0T engine with a maximum power output of 170 horsepower, paired with a 7-speed Stronic dual-clutch transmission. This model can accelerate from 0 to 100 km/h in 6.9 seconds.
6
5
Share

Will the 4S warranty cover issues if the car is serviced outside?

If the car is serviced outside and issues arise, will the 4S warranty cover it? According to relevant regulations, if maintenance is performed outside a 4S shop, to enjoy the three-guarantee service, you need to provide a series of related materials from the maintenance shop, including its maintenance qualifications, material lists, maintenance items, quality inspection sheets, duplicate copies of the factory completion certificate, and proof of purchase. No matter where the maintenance is performed, it will not pose any threat to the car's "three-guarantee" rights. The national three-guarantee policy does not clearly specify the connection between not servicing at a 4S shop and the three-guarantee service. The three-guarantee policy states that as long as the maintenance is performed according to the manufacturer's requirements, the warranty will not be voided, and any quality issues during the three-guarantee period can be covered by the three-guarantee service.
12
1
Share

Should You Press the Clutch with Your Toes or the Sole of Your Foot?

Press the clutch with the sole of your foot. The sole provides a sturdy, powerful, and larger contact area when pressing the clutch pedal, and the forward position makes it easier to control. The functions of the clutch are: 1. During driving, it prevents the meshed force-transmitting gears in the transmission from being unloaded of their load; 2. It prevents the drivetrain from being overloaded and reduces torsional vibration impact; 3. It ensures smooth vehicle starting. Maintenance methods for clutch use include: 1. When installing on separate shafts, the coaxiality between the driving part and the driven part shaft should not exceed 0.1mm; 2. When installing on the same shaft, axial fixation is required to prevent axial movement between the driving and driven parts; 3. Clean thoroughly before installation to remove anti-rust grease and debris; 4. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation.
6
2
Share

What are the effects of not turning off the air conditioning when the car is turned off?

The effects of not turning off the air conditioning when the car is turned off are: 1. It can cause odors when the air conditioning is turned on, which can only be resolved by disassembling and cleaning the evaporator box and air conditioning duct pipes; 2. During the next startup, it will rotate together with the compressor, increasing the load on the motor. When running the air conditioning in summer, the air conditioning system is in a cooling state, forming surface moisture that is blown into the air conditioning ducts by the air conditioning, leading to high humidity inside the ducts and the proliferation of mold, which in turn causes air conditioning odors. The correct method of operating the air conditioning is: Turn off the air conditioning switch a few minutes before the engine is turned off, but allow the fan to continue running. This helps the temperature inside the air conditioning evaporator box and ducts to rise, evaporating the moisture inside and keeping the air conditioning system relatively dry, thus preventing mold growth.
16
4
Share

Is the Audi RS5 four-wheel drive?

The Audi RS5 is equipped with a four-wheel drive system, featuring a full-time four-wheel drive system and a crown gear differential. There are three types of four-wheel drive systems in vehicles: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. Part-time four-wheel drive systems are typically found only in some rugged off-road vehicles, while ordinary four-wheel drive family cars use on-demand four-wheel drive systems or full-time four-wheel drive systems. Vehicles with on-demand four-wheel drive systems do not always have power to all four wheels; most of the time, these vehicles operate in two-wheel drive mode, switching to four-wheel drive only under certain special road conditions. The Audi RS5 is a high-performance model from Audi's RS series, which is known for its superior handling and strong performance. The Audi RS5 is powered by a 2.9-liter twin-turbocharged engine, delivering 450 horsepower and a maximum torque of 600 Newton-meters, paired with an 8-speed automatic transmission.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.