What is the difference between P gear and N gear?

1 Answers
SanMichael
07/29/25 11:24am
The differences between P gear and N gear are: 1. Different types: P gear is called the parking gear; N gear is called the neutral gear. 2. Different functions: P gear is suitable for parking and stopping; N gear is used for short-term parking. 3. Different clutch control: In P gear, the parking gear is partially locked inside the transmission, so on flat ground without stepping on the brake, the vehicle has a certain parking effect; N gear is neutral, where the engine and the drive shaft are completely separated at the transmission position, with no connection. Therefore, P gear is suitable for parking and stopping, meaning when you arrive at your destination and are about to turn off the engine, you should shift to P gear. During driving, at intersections or for temporary stops (such as yielding to vehicles or pedestrians), N gear should be used.
Was this review help?
13
3
Share
More Forum Discussions

Does a new battery need to be charged?

A new battery with a recent production date that hasn't been used can be directly installed without charging. However, if the battery has an older production date or has been previously used, it requires charging. It's recommended to charge any new battery upon receiving it, as the first charge is crucial for battery performance. A battery refers to a rechargeable power storage device that can be reused after discharge, including lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. In lead-acid batteries, the positive electrode is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge (usage), both electrodes react with sulfuric acid to form lead sulfate. When the sulfuric acid concentration drops to a certain level, the battery must be recharged. Using an external power source for charging restores the electrodes and electrolyte to their original state, allowing continued use after charging.
1
0
Share

Where is the drainage hole of the Volkswagen Lavida door?

The drainage hole of the Volkswagen Lavida door is located at the bottom of the door. You can see it by removing the sealing rubber strip at the very bottom of the door. Here is some relevant information: 1. The car door drainage hole is a necessary device on every vehicle, which can effectively drain rainwater outside the car during rainy or snowy weather or when the vehicle is wading, keeping the interior dry. 2. Most cars have drainage holes under the four doors, and some are set inside the sealing strip. Most door panel drainage holes do not have a hose for guidance, and the rainwater that leaks into the door will flow to the lower drainage hole and be discharged. The drainage hole is positioned low. If you often drive on muddy roads, dust and mud splash on the door or too many advertising cards are stuffed into the door, they will rot and mold inside, causing the drainage hole to clog. Moreover, the door will not only rust but also damage the lock block, door lock actuator, and window regulator.
18
4
Share

How to Unlock the Anti-Theft System of Hyundai ix35?

First, disconnect the negative terminal of the battery for a period of time, wait for the engine's protection data to be cleared, and then reconnect it. Call for a tow truck to take the vehicle to a designated 4S store, where a fault code scanner may easily resolve the issue.
12
1
Share

Do I Need to Remove the Bumper to Replace the Headlight?

Replacing the headlight bulb does not require removing the bumper, but replacing the entire headlight assembly does. Replacing the headlight bulb: Open the engine compartment cover, locate the dust cover behind the headlight assembly, and identify the bulb that needs replacement. Press the metal clip at the end of the bulb and pull it out. Disconnect the power connector at the rear, then connect the new bulb and reassemble in order. Replacing the headlight assembly: After opening the engine compartment cover, you can see the headlight assembly. First, disconnect the headlight wiring harness. Then, use a socket wrench to remove the mounting screws of the headlight assembly. Once all screws are removed, the headlight assembly can be taken out. Some vehicles use bolts or screws to attach the headlight to the body, and this varies by model. Generally, opening the hood reveals one screw, and removing the bumper exposes the screws connected to the fender. Proceed with disassembly accordingly. Be sure to protect the headlight wiring harness.
3
5
Share

What car brand is represented by the 'T' logo?

A 'T' logo represents Tesla. Here are some relevant details: 1. Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage systems. Headquartered in Palo Alto, California, in Silicon Valley, it was initially founded in 2003 by Martin Eberhard and Marc Tarpenning. 2. Logo meaning: In recent years, Tesla's T-shaped logo has become widely recognized, but it turns out this simple emblem is not just the initial of inventor Nikola Tesla's surname. Tesla CEO Elon Musk explained on Twitter that this stylized 'T' also subtly represents the company's products, stating that the T logo symbolizes the cross-section of an electric motor. 3. The main part of the letter T represents a section of the motor's rotor, while the top line signifies part of the external stator. In terms of logo design, Tesla shares similarities with SpaceX, another bold venture by Musk focused on building rockets and sending payloads into space orbit.
18
4
Share

How to Replace the Seat Foam of Wuling Sunshine?

Locate the 4 screws under the seat and unscrew them using a hexagon screw tool, then you can remove the seat. Pry off the hooks securing the foam, then directly replace the car seat foam. Finally, reinstall the corresponding components to complete the task.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.