What is the difference between 'No Entry' and 'No Through Traffic'?

2 Answers
McGianna
08/29/25 5:45am
No Entry and No Through Traffic have different meanings and different signs. Below are specific descriptions and additional information about the differences: Different meanings: No Through Traffic means that neither vehicles nor pedestrians are allowed to proceed further to avoid danger, while No Entry refers to prohibiting all types of motor vehicles from entering the road ahead. Different signs: The No Through Traffic sign features a red circle with a blank interior, whereas the No Entry sign has a white horizontal bar inside a red circle. Purpose of prohibition signs: They are primarily used to impose restrictions or prohibitions on motor vehicles, such as prohibiting motor vehicle traffic, parking, turning, honking, as well as limiting vehicle speed or weight.
Was this review help?
10
0
Share
DiLeah
09/11/25 3:28am
As an experienced veteran driver with over 20 years on the road, I frequently encounter these two signs and must clarify their differences. First, the 'No Entry' sign – that red circular sign with a red cross or prohibited arrow inside means vehicles are not allowed to enter that road or area, such as one-way street entrances, private parking lots, or gated communities. Violators risk tickets and may cause traffic jams. The 'No Overtaking' sign is a yellow triangular sign, usually with a white background and black border, indicating overtaking is prohibited on two-way roads, such as narrow roads, bridges, or curved sections where overtaking could easily lead to accidents. In my younger days, I once overtook without noticing this sign on a mountain road and nearly collided head-on – I've learned my lesson since. Remember: the first prohibits entry into restricted zones, the second prohibits overtaking in dangerous sections. Following them ensures safety.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What is the difference between MT and CVT?

MT and CVT both refer to types of automotive transmissions, with the difference being that MT stands for manual transmission, while CVT is an automatic transmission. Below are the relevant introductions about MT and CVT: MT: MT requires manually shifting the gear lever (commonly known as the gear stick) to change the gear engagement position inside the transmission, altering the gear ratio to shift the car's speed. Most manual transmissions in passenger cars are four or five-speed gear transmissions, typically equipped with synchronizers for easier shifting and reduced noise. When operating a manual transmission, the clutch must be depressed to move the gear lever. CVT: The gear ratio in a CVT is not a series of discrete points but a continuous range of values, for example, it can vary from 3.455 to 0.85. The structure of a CVT is simpler than that of a traditional transmission, with a smaller size. It does not have the numerous gear pairs of a manual transmission nor the complex planetary gear sets of an automatic transmission. Instead, it primarily relies on the primary and secondary pulleys and a metal belt to achieve stepless variation of the gear ratio.
9
4
Share

How to Set Up One-Touch Power Window for Leiling?

To set up the one-touch power window for Leiling, follow these steps: 1. Start the vehicle, press the one-touch start switch, raise the power window to the top, and hold the switch for 5 seconds; 2. Lower the power window to the bottom, and hold the switch for another 5 seconds to complete the setup. Taking the 2021 Leiling Progressive Edition as an example, it is a compact car under GAC Toyota, with body dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. The 2021 Leiling Progressive Edition is equipped with a 1.2T turbocharged engine, with a maximum power speed ranging from 5200 to 5600 rpm.
9
1
Share

What is the body length of the Kia K2 in millimeters?

The body length of the Kia K2 is 4400 millimeters. Other body dimensions include: width of 1740 millimeters, height of 1460 millimeters, a wheelbase of 2600 millimeters, a body structure of a 4-door 5-seater sedan, a minimum ground clearance of 160 millimeters, and a fuel tank capacity of 43 liters. The Kia K2 is equipped with a 1.4L naturally aspirated engine, with a maximum power speed of 6300 revolutions per minute and a maximum torque speed of 4000 revolutions per minute. It is paired with a 6-speed manual transmission. The suspension system features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
13
2
Share

What is the standard tire pressure for cars?

The standard tire pressure for cars is between 2.4 and 2.5 bar. Tire pressure significantly affects vehicle performance and power. The impacts of overinflation are: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, reducing driving comfort; 3. Accelerated wear on the central tread pattern, shortening tire lifespan; 4. Increased body vibration, affecting the longevity of other components. The effects of underinflation include: 1. Increased friction coefficient with the road surface; 2. Heavier steering wheel feel and tendency to deviate; 3. Increased movement of tire components, causing abnormal heat generation due to excessive rolling.
7
1
Share

How to Replace the Battery in a New BMW Key?

The method to replace the battery in a new BMW key is as follows: 1. Press the switch at the top of the key to remove the mechanical key; 2. Insert the mechanical key into the gap at the top to pry open the key casing; 3. Remove the old battery and replace it with a new one of the same model; 4. Reassemble the key casing and mechanical key. BMW models include the BMW 3 Series, BMW 5 Series, BMW X1, BMW X3, BMW X5, etc. Taking the 2021 BMW X3 as an example, it is a mid-size SUV with body dimensions of length 4717mm, width 1891mm, height 1689mm, a wheelbase of 2864mm, and a fuel tank capacity of 65 liters.
9
3
Share

What Does the Three-Year or 100,000-Kilometer Vehicle Warranty Cover?

The three-year or 100,000-kilometer vehicle warranty primarily covers the core components of the vehicle, which include the engine, chassis, transmission, and drivetrain. The vehicle warranty means that the manufacturer will replace faulty parts free of charge if they are confirmed to be defective due to quality issues rather than human damage, provided the replacement occurs within the warranty period or the specified mileage limit. The warranty does not apply under the following circumstances: 1. Failure to follow the manufacturer's requirements for regular maintenance at designated 4S shops or authorized service stations; 2. Unauthorized modifications to the vehicle or changes to its intended use; 3. Damage caused by improper use or traffic accidents.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.