What is the Difference Between New Energy Vehicles and New Energy (Pure Electric) Vehicles?

1 Answers
LeFelicity
07/30/25 8:42am
New Energy Vehicles and New Energy (Pure Electric) Vehicles have the following differences: I. Different Concepts 1. New Energy Vehicles: Refers to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. New Energy (Pure Electric) Vehicles: Refers to vehicles powered by onboard power sources, using electric motors to drive the wheels, and meeting all requirements of road traffic and safety regulations. II. Advantages and Disadvantages 1. New Energy Vehicles: Advantages include low fuel consumption, less pollution, solving the problems of high energy consumption in air conditioning, heating, and defrosting encountered by pure electric vehicles, and excellent overall vehicle performance due to multiple power sources working simultaneously; disadvantages include relatively complex system structures and less noticeable fuel-saving effects during long-distance high-speed driving. 2. New Energy (Pure Electric) Vehicles: Advantages include relatively simple and mature technology, and the ability to charge wherever there is a power supply; disadvantages include the low energy storage per unit weight of batteries, expensive batteries, lack of economic scale, resulting in higher purchase prices; as for usage costs, some trial results show they are more expensive than conventional vehicles, while others are only 1/7~1/3 of conventional vehicles, depending mainly on battery lifespan and local fuel and electricity prices. III. Classification 1. New Energy Vehicles: Include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. 2. New Energy (Pure Electric) Vehicles: Can be classified by purpose into electric cars, electric trucks, and electric buses.
Was this review help?
12
4
Share
More Forum Discussions

What transmission does the Jetour X70M use?

Jetour X70M uses two types of transmissions in total, one is a 6-speed manual transmission, and the other is a 6-speed dual-clutch transmission. The dual-clutch transmission is developed based on the manual transmission. The structure of this transmission is similar to that of a manual transmission, with the dual-clutch transmission only adding an extra set of clutch and a set of shift control mechanism compared to the manual transmission. Here are some related introductions about the Jetour X70M: 1. The front grille size has been further increased compared to previous models, while the four pearl lights in the fog light areas on both sides are retained, but with a more angular design, providing a strong visual impact. The side adopts a dual waistline design, extending from the front to the rear of the car, enhancing its sense of layering. 2. The interior has been updated with light-colored wood grain trim panels, improving the sense of luxury. The 10.1-inch central LCD screen continues to be used, but it has been upgraded with a new vehicle infotainment system.
10
3
Share

What is the difference between automatic air conditioning and manual air conditioning in cars?

The difference between automatic air conditioning and manual air conditioning in cars lies in the operation method: automatic air conditioning does not require frequent operation. Once the temperature is set, the air conditioning will automatically maintain the stable temperature inside the car at this value; manual air conditioning can only adjust the air volume manually. Car automatic air conditioning is now controlled by a computer. A well-designed car computer-controlled air conditioning system can not only automatically adjust the temperature, humidity, cleanliness, air volume, and air direction inside the car but also perform fault detection. The automatic adjustment functions of car air conditioning include automatic adjustment of temperature and humidity inside the car, automatic control of air recirculation and supply modes, as well as control functions such as operation mode and ventilation volume control.
15
4
Share

What is the freezing point of antifreeze?

Antifreeze has freezing points of -15°C, -25°C, -30°C, and -40°C. When selecting antifreeze, it is generally advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. Can different antifreeze brands be mixed: It is necessary to use the same brand of antifreeze. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, though it could also be caused by excessively high engine temperature. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the fluid level markings on the antifreeze tank. The antifreeze level should normally be between the maximum and minimum marks. If it is below the minimum mark, it indicates a lack of antifreeze.
3
0
Share

How to reset the tire pressure light on Dongfeng Fengshen Yixuan?

Dongfeng Fengshen Yixuan tire pressure light reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: Usually, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible.
2
3
Share

How to adjust the rearview mirror of Trumpchi GS4?

Trumpchi GS4 rearview mirror adjustment method: On the left door of the Trumpchi GS4 or below the steering wheel near the left door. After finding the position, move the gear switch to the left to adjust the left rearview mirror, and similarly to the right for the right rearview mirror. The following is a related introduction to the adjustment method of the Trumpchi GS4 rearview mirror: 1. Adjust the central rearview mirror: Place the horizon in the middle and the ear on the left. Position the distant horizon at the midline of the central rearview mirror, then move it left or right so that the image of your right ear is just at the left edge of the mirror. 2. Adjust the left rearview mirror: Place the horizon at the midline of the rearview mirror, then adjust the edge of the car body to occupy 1/4 of the mirror image. 3. Adjust the right rearview mirror: Since the driver's seat is on the left, the driver's grasp of the situation on the right side of the car is not very accurate. Additionally, due to the need for roadside parking sometimes, the ground area should occupy a larger portion when adjusting the up and down positions of the right rearview mirror, about 2/3 of the mirror surface. As for the left and right positions, adjust it so that the car body occupies 1/4 of the mirror surface area.
17
5
Share

Function of the Exhaust Valve?

The main functions of the exhaust valve are as follows: 1. It allows the exhaust gases from the car to be recirculated back into the cylinder for re-burning, and this small amount of exhaust gas reduces the temperature of the cylinder during the combustion process. 2. Nitrogen oxides are produced under high temperature and oxygen-rich conditions, so the exhaust valve suppresses the production of nitrogen oxides, thereby reducing the nitrogen oxide content in the exhaust gases. 3. When the accelerator reaches a certain opening degree, the exhaust valve will open, connecting the exhaust from the cylinder to the intake pipe, and then entering the cylinder again for cyclic combustion, ensuring complete combustion of the exhaust and purifying the air. Working principle of the exhaust valve: The high-pressure gas from the compressor, including gaseous working medium and lubricating oil, enters the exhaust valve and flows spirally along the guide vane. Through centrifugal force and gravity, the lubricating oil is separated from the working medium gas and accumulates along the inner wall of the cylinder. The working medium gas is discharged from the center pipe of the exhaust valve through multiple baffles. The separated lubricating oil is collected at the lower part of the oil separator and can be periodically discharged or automatically returned to the crankshaft box of the compressor via a float valve.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.