···
Log in / Register

What is the difference between Lovol 1204A and 1204D?

4 Answers
DeAlivia
09/05/25 7:41am

The main difference lies in the rear axle, one is a TA axle and the other is a TB axle. Below is more information about the rear axle: 1. Introduction: The rear axle refers to the component of the rear drive shaft that transmits power in a vehicle. It consists of two half-axles and can perform semi-axle differential movement. At the same time, it is also a device used to support the wheels and connect the rear wheels. For front-wheel-drive vehicles, the rear axle is merely a trailing axle, serving only a load-bearing function. If the front axle is not the drive axle, then the rear axle becomes the drive axle, in which case it not only bears the load but also functions in driving, deceleration, and differential. 2. Classification: Rear axles are divided into solid axles and semi-axles. Solid axles are paired with non-independent suspensions, such as leaf spring suspensions, while semi-axles are paired with independent suspensions, such as MacPherson suspensions.

Was this review help?
17
0
Share
ElizaLee
09/17/25 7:53am

I've been using the 1204A on my farm for several years now, and I find it quite reliable with stable power output, though gear shifting isn't as smooth. After a friend bought the 1204D, I had the chance to try it out. The noticeable differences are quicker acceleration and more responsive engine performance, with an estimated power increase of about 10%. Additionally, the 1204D comes with a built-in GPS navigation system that automatically plans routes, saving a lot of time during work. My 1204A isn't particularly fuel-efficient, especially under heavy loads, but the 1204D employs new fuel-saving technology, significantly cutting fuel costs over a season. In terms of maintenance, parts for the 1204A are easy to find and inexpensive, and I often do minor replacements myself. The 1204D is a bit more complex, requiring professional tools and incurring higher maintenance costs, though it tends to have fewer issues. Overall, if efficiency is a priority, the 1204D is worth the investment, but for those looking to save money and practicality, the 1204A still gets the job done.

Was this review help?
15
4
Share
Expand All
DelLilliana
10/31/25 8:24am

Recently, I've been quite fascinated by agricultural machinery technology. After researching the Lovol series, I found that the 1204D model has an additional intelligent control module compared to the 1204A, which can monitor tire pressure and temperature sensors in real time to prevent overheating damage. The 1204A is an older model with a simpler engine structure lacking these features, making it prone to minor issues. The engine specifications differ between the two: the 1204A uses a standard diesel engine with about 90 horsepower, while the 1204D is upgraded to a turbocharged version, boosting horsepower to over 100, resulting in much faster operational response. I also noticed that the 1204D supports remote diagnostics, allowing users to check equipment status via a mobile app, whereas the 1204A relies solely on manual inspections. In terms of comfort, the 1204D features a seat with shock-absorbing adjustments for a smoother ride, while the 1204A's seat is hard and tiring for long hours of operation. If modern convenience is a priority, the 1204D is a great upgrade.

Was this review help?
12
0
Share
Expand All
LaKimberly
12/14/25 8:32am

After repairing so many agricultural machines, the common issues with the Lovol 1204A are frequent cooling system jams, especially under heavy loads in summer, where the cooling fan is prone to failure. The 1204D has improved cooling design, providing more even heat dissipation and significantly lower failure rates. Structurally, both models share a similar frame, but the 1204D comes with added protective covers to reduce engine clogging from dust, whereas the 1204A's open design tends to accumulate dust. In terms of power, the 1204A offers stable output but lacks explosive force, making it suitable for lighter tasks. The 1204D, with its adjusted transmission ratio, delivers stronger torque, enabling faster plowing work. For maintenance, 1204A parts are universal, easy to replace, and cost-effective. The 1204D uses newer model filters and oil pumps, which are slightly more expensive. Regular dust cleaning and lubrication are recommended to minimize issues. The main differences lie in durability, with the 1204D having a longer lifespan.

Was this review help?
9
4
Share
Expand All
More Forum Discussions

What Are the Reasons for the Wuling Journey Engine Malfunction Light to Illuminate?

The Wuling Journey engine malfunction light may illuminate due to the following 7 main reasons: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will cause the engine malfunction light to illuminate. Fuel quality issues: If the fuel and engine oil are not added as required by the manufacturer, it may cause engine wear, leading to the malfunction light illuminating. Poor combustion of the air-fuel mixture: Poor combustion of the air-fuel mixture can cause engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, the engine malfunction light will illuminate. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine malfunction light to illuminate. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing faults are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the three-way catalytic converter, and engine fuel supply system failures can easily cause three-way catalytic converter faults. Anti-theft system failure: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction, and the engine malfunction light will illuminate. If the engine malfunction light illuminates, follow these steps: First, check whether the engine is running normally, such as whether there is shaking, black smoke, etc. If so, try not to start the engine again. Especially note that if the red light is on, do not start the engine again. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once, or turn the key halfway to the 'on' position without pressing the clutch. The car will enter self-test mode after powering on. Wait for 5-10 seconds and observe whether the malfunction light on the dashboard goes off. If the malfunction light does not go off, go to a service station as soon as possible to diagnose the issue. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
7
4
Share

What to Do When the Engine Idles Rough Due to Small Valve Clearance?

Engine rough idling caused by excessively small valve clearance is a common issue. This problem can be resolved by simply adjusting the valve clearance to the appropriate range. More details about car rough idling are as follows:1. When the valve clearance is too small, it may cause the valves to open prematurely or not close tightly, which affects the cylinder pressure and prevents the fuel and air mixture from burning completely, leading to abnormal engine rough idling.2. Besides causing abnormal rough idling, excessively small valve clearance can also result in difficulties in starting the car and engine overheating.
14
3
Share

Body Dimensions of the New Sagitar vs. Old Sagitar

The new Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. Here are the specific details: Comfortable interior space: The 80mm increase in length significantly enhances the interior space, particularly improving rear passenger comfort. Wheelbase determines space: The wheelbase defines a vehicle's interior space. As a sedan, the overall spatial structure of the 2019 Sagitar 280TSI DSG R-Line National V model remains highly satisfactory.
1
2
Share

Does Toyota Have Motorcycles?

Toyota does not have motorcycles, only cars. Below is a detailed introduction about Toyota cars: Overview: FAW Toyota Motor Co., Ltd. was established in June 2000 and registered in Tianjin Economic-Technological Development Area. FAW Toyota has three major production bases located in Tianjin, Changchun Jilin, and Chengdu Sichuan, China. Models: FAW Toyota's product lineup includes the "VIOS", "COROLLA", "ALLION", "AVALON" sedans, "IZOA", "RAV4", "CROWNKLUGER" SUVs, and the "COASTER" bus.
16
5
Share

What is the reason for the lack of power when the Great Wall H6 goes uphill?

Great Wall H6's lack of power when climbing hills may be caused by excessive carbon deposits in the engine leading to insufficient power. Here are the relevant explanations: Excessive throttle sludge: This can cause the engine to accelerate poorly and increase fuel consumption. The throttle can be cleaned at a 4S shop or cleaned by yourself. First, apply some oil to the fixed metal retaining ring to prevent slipping when disassembling. Decreased spark plug ignition capability: Since spark plugs are used for ignition, if they are not replaced for a long time, it will cause a decrease in power. The timing of ignition is precise, and missing the optimal ignition time will result in a decrease in power.
4
2
Share

What are the symptoms of an incompatible battery replacement for a BMW?

The symptoms of an incompatible battery replacement for a BMW are: hearing abnormal noises from the audio system after turning off the engine, potential battery damage, and possible power leakage. Here are some precautions regarding car battery replacement: Battery selection: When purchasing a battery, ensure it matches the original battery model of your vehicle to ensure proper functioning. It is recommended to use branded batteries for guaranteed quality. Battery replacement: During battery replacement, maintain power connection by first connecting the new battery to the vehicle's power source. After removing the old battery, install the new one. After installation, it is advisable to drive for about half an hour to allow the battery to charge and ensure sufficient power.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.