What is the difference between Haval M6 and H6?

2 Answers
Douglas
07/25/25 4:53am
Haval M6 and H6 differences: 1. Different body dimensions: The Haval M6 has body dimensions of 4649mm in length, 1830mm in width, and 1705mm in height; the Haval H6 has body dimensions of 4600mm in length, 1860mm in width, and 1720mm in height. 2. Different wheel sizes: The Haval M6 uses 17-inch wheels; the Haval H6 uses 18-inch and 19-inch wheels. The Haval H6 is the first SUV model launched by Haval, while the Haval M6 is a newly launched SUV by Haval, also a fully upgraded SUV. The interiors of both cars still follow a conventional design, but the M6's interior is more visually appealing, with a more youthful design. The H6 uses a mechanical gear lever, while the M6 uses an electronic gear lever. The configurations of the two cars are basically not significantly different.
Was this review help?
5
1
Share
LeEloise
08/10/25 5:31pm
As a budget-conscious car owner, I've been paying close attention to the differences between the Haval M6 and H6 for quite some time. To be honest, the most obvious difference is the price—the M6 starts at around 70,000 to 90,000 RMB, while the H6 begins at 100,000 to 150,000 RMB, making it several tens of thousands cheaper. The M6 is based on an older platform, with simpler interiors and configurations, such as more plastic materials, but it offers ample space—even with a full back seat, it doesn’t feel cramped, and the trunk is very practical for luggage. It’s powered by a 1.5T engine with an average fuel consumption of around 8L, making it economical for city driving. The H6, on the other hand, is much more premium, featuring soft-touch interiors, smart screens, and a panoramic sunroof—everything you need for a more comfortable drive. In terms of appearance, the M6 has a more boxy and rugged look, while the H6 is sleeker and more stylish. Personally, I think if you're mainly using it for commuting, the M6 offers incredible value for money; but if you're after comfort, the H6 is worth the extra cost.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What are the reasons for high fuel consumption?

There are several main reasons for high fuel consumption in cars: poor driving techniques, engine usage conditions, and lack of maintenance during vehicle use. Below are specific situations that lead to high fuel consumption: Causes of high fuel consumption in cars: Abnormal tire pressure or switching to oversized tires: Underinflated tires can affect fuel consumption. When tire pressure is too low, the contact area between the tires and the road increases, leading to greater driving resistance, which naturally results in higher fuel consumption. Long idling without turning off the engine or frequent ignition: During prolonged waits when the vehicle doesn't need to move, it's recommended to turn off the engine. Every time the engine starts, the computer-controlled fuel injection volume is higher, so frequent engine starts within a short period will definitely increase the vehicle's fuel consumption. Aggressive acceleration and frequent braking while driving: Unless absolutely necessary, avoid frequent overtaking on the road. Maintaining a steady speed helps reduce fuel consumption. Additionally, maintaining a proper following distance and minimizing unnecessary braking can also save fuel. Driving at low gear with high speed or high gear with low speed: This situation is more common among new drivers. Often, the vehicle's speed is already high, but the driver fails to upshift accordingly, leading to increasingly higher engine RPM and a surge in fuel consumption. Another scenario is driving at very low speeds while staying in a high gear, which is most noticeably characterized by engine and body vibrations, with the risk of stalling at any moment. Fully open windows in summer or using air conditioning in traffic jams: Turning on the air conditioning in summer increases engine load, leading to higher fuel consumption. Poor route planning, driving on congested roads, or frequent lane changes: For this issue, it's recommended to plan the route in advance, check local traffic information and road conditions, and avoid congested sections.
7
4
Share

Should Turning Vehicles Yield to Straight-going Vehicles or Vice Versa?

Turning vehicles should yield to straight-going vehicles. However, turning vehicles are not required to yield to straight-going vehicles in all situations. There are two scenarios where straight-going vehicles must yield to turning vehicles; otherwise, it constitutes a traffic violation. Yielding on Auxiliary Roads: Vehicles going straight on auxiliary roads must yield to vehicles turning in from the main road. Roads are divided into main roads and auxiliary roads. Regardless of direction, vehicles on auxiliary roads must yield to vehicles on the main road. Some intersections may also have yield signs, so it's crucial to slow down and not force your way through. Yield Signs: When encountering an inverted triangle yield sign on the road, drivers must slow down and yield, allowing other vehicles to pass before proceeding. Forcing your way through could lead to accidents for which you would bear full responsibility. Even straight-going vehicles must yield to turning vehicles in such cases.
20
2
Share

How long is the validity period of driving school insurance?

Vehicle insurance is divided into compulsory traffic insurance, commonly referred to as compulsory insurance, and commercial insurance, which includes third-party insurance and vehicle damage insurance. Generally, the insurance period is one year. Introduction one: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license". It is a certificate required by law for motor vehicle drivers. Introduction two: Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle at will may lead to traffic accidents. Generally, people cannot drive on the road without a license, but for those who have mastered safe driving skills, the document that allows them to drive on the road is the "driver's license". This indicates that a driver's license is a "permit".
6
1
Share

Is the Subject 2 Exam Acceptance Status the Same as Application Status?

No. Detailed Explanation: Application acceptance refers to the status where you have selected an examination venue but are still awaiting results, which is displayed as 'Application in Progress.' If it remains as 'Acceptance in Progress,' it may indicate an unsuccessful booking attempt, often due to high demand in certain areas. If acceptance is not confirmed within five working days, you need to reapply. A persistent 'Application in Progress' status means the booking hasn't succeeded yet and is still under processing, requiring patience. Additional Tips: Book as early as possible within the system's available time slots; avoid peak booking periods, i.e., times showing high exam congestion; prioritize booking examination slots with higher availability rankings.
15
5
Share

Can a fragrance system be installed as an aftermarket accessory?

Fragrance systems can be installed as aftermarket accessories. Here's an introduction to fragrance systems: Advantages: The fragrance dispenser is part of the vehicle air conditioning components, differing from any traditional form of car perfume. The fragrance dispensing device absorbs fragrance through a micropump, then circulates the scent through the vehicle's ventilation ducts to distribute fragrance throughout the cabin. It eliminates the pungent sensation associated with traditional car perfumes, delivering fragrance at just the right rhythm—like bathing in the fresh air of nature, rich yet pleasantly comfortable. Features: The fragrance spray generator can adjust the interior scent according to personal preferences. It doesn't permanently alter the vehicle's interior odor, and fragrance molecules won't deposit on fabric surfaces or passengers' clothing.
4
1
Share

What are the benefits of polishing and waxing?

Car waxing can give the vehicle a more attractive shine, drawing more attention. Car Waxing: Car waxing also provides waterproofing, preventing rainwater from corroding the vehicle. Especially nowadays, urban rainwater has extremely high acidity and strong corrosive properties, making it essential to wax your car regularly. Car Polishing: The purpose of polishing is to remove contaminants from the paint surface, thereby smoothing it out and refining surface scratches. Simply put, polishing involves using a polishing compound with abrasive particles, aided by a polishing machine, to create friction with the paint surface. However, polishing has a significant drawback: it can thin the car's paint.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.