What is the difference between full-time four-wheel drive and on-demand four-wheel drive?

Should I engage first gear or release the handbrake first in Subject 2?

First engage the first gear, and then release the handbrake. When engaging first gear, you need to press the clutch and the brake pedal to effectively prevent the vehicle from rolling back, as in the third item of the Subject 2 test—the slope fixed-point parking and starting—rolling back will result in point deductions. Here are some additional details: Subject 2 Test Items: Subject 2 consists of five test items. The first test item is parallel parking, the second is reversing into a parking space. The third test item is slope fixed-point parking and starting, the fourth is turning at a right angle, and the fifth is driving on a curve. Passing all these completes the Subject 2 test. Notes for the Subject 2 Test: Before the test, you should take a mock test once to familiarize yourself with the vehicle and the test site. After entering the vehicle, first fasten your seatbelt and adjust the seat angle and rearview mirror angle. If you fail the first test, you must immediately exit the vehicle and wait for the staff to drive the vehicle back to the starting position for another attempt.

14

2

Share

How Many Years is the Lifespan of a Gas-Powered Vehicle Generally?

There is no specific vehicle lifespan; under normal maintenance conditions, it is entirely the same as that of a fuel-powered vehicle. Gas-powered vehicles and oil-powered vehicles only differ in the type of fuel used, with no other differences. Advantages and Disadvantages of Natural Gas Vehicles: Higher Economic Benefits: For the same equivalent heat value, countries around the world generally set the price of 1 cubic meter of natural gas at half that of 1 liter of gasoline or diesel. Better Social Benefits: Compared to petroleum fuels, gas fuels have smaller energy losses during preparation and emit fewer harmful pollutants into the atmosphere. From the perspective of fuel sources, they are more environmentally friendly. Relatively Safe: The gas cylinders or tanks of CNG, LNG, and LPG vehicles are very sturdy and reliable. Natural gas itself is lighter than air (except for LPG), so any slight leakage will quickly disperse into the atmosphere. All components of the gas fuel system, especially the sealing parts, undergo strict inspections. Therefore, natural gas is relatively safe as a vehicle fuel. Disadvantages Due to the low energy density of gas fuels, natural gas vehicles carry less fuel, generally resulting in a shorter driving range compared to gasoline vehicles. Since gas fuels occupy a certain volume in the combustible mixture in the cylinder (the volume occupied by liquid fuel in gasoline engine cylinders is negligible), the work done when using natural gas as fuel is less under the same cylinder working volume. Since current natural gas vehicles are modified from original gasoline or diesel vehicles, most of the original fuel systems of gasoline or diesel engines are retained. Adding a natural gas fuel system to the original vehicle, especially the gas cylinder, reduces the effective space of the vehicle and increases its own weight. Natural gas is a gaseous fuel, making it difficult to store and transport. When converting existing vehicles to use natural gas as fuel, additional components such as gas cylinders, pressure reducers, and mixers need to be added to the engine fuel system, requiring a certain investment in vehicle modification.

17

2

Share

Which part of the tire experiences increased wear when tire pressure is too high?

Tire pressure that is too high will cause increased wear on the central part of the tire tread. Related information about tire pressure is as follows: Low tire pressure: Both excessively low or high tire pressure will affect the service life of the tire. If the tire pressure is too low, its radial deformation increases, causing excessive deformation on both sidewalls, leading to shoulder wear on the tread edges. This also raises the tire temperature, significantly reducing the tire's service life. High tire pressure: If the tire pressure is too high, the tire's rigidity increases while deformation and contact area decrease. This results in higher unit pressure on the central part of the tread, accelerating wear. It causes central tread wear, affects ride comfort, and reduces tire lifespan.

15

4

Share

How often should the engine oil be changed for a car that is not driven frequently?

If a car is not driven frequently, the engine oil should generally be changed every six months. Here is a detailed introduction to the functions of changing engine oil: Cleaning performance: Engine oil can clean and disperse these by-products, preventing them from coagulating inside the engine and keeping it clean. Protective performance: Changing the oil flushes away dust, impurities, water, and other substances, protecting the engine and ensuring its normal operation. Lubrication performance: Engine oil has a shelf life. Timely oil and filter changes help clean and filter various impurities, preventing them from causing wear and tear to the engine.

10

0

Share

Is Coasting in Neutral Gear Allowed for Manual Transmission Cars?

Coasting in neutral gear is not recommended for manual transmission cars, nor for automatic transmission cars, as it can cause impact to the transmission and compromise driving safety. Therefore, it is advised for drivers to avoid the habit of coasting in neutral during regular driving. For automatic transmissions, shifting into neutral while coasting can lead to reduced oil pressure inside the transmission, which may affect lubrication and cooling. The correct use of neutral gear is when waiting at traffic lights or during brief stops by shifting into N (Neutral) gear. In this state, the power connection between the engine and transmission is cut off, which can help save fuel to some extent. Additionally, since the vehicle is stationary, there are no concerns such as brake overheating.

17

0

Share

What is the function of a stabilizer bar?

The function of a stabilizer bar is to prevent excessive body roll during cornering and to improve the vehicle's stability when driving on uneven road surfaces. The stabilizer bar is a torsion bar spring made of spring steel, shaped like a U, and is installed horizontally at the front and rear of the vehicle. The middle part of the bar is connected to the frame with a sleeve joint, while the two ends are fixed to the left and right suspensions. When the vehicle body moves only vertically, the deformations of the suspensions on both sides are the same, and the stabilizer bar does not function. When the vehicle body rolls, the suspensions on both sides move unevenly, causing the stabilizer bar to twist. The elasticity of the bar then acts as resistance to further rolling, providing lateral stability.

19

0

Share

What is the difference between full-time four-wheel drive and on-demand four-wheel drive?

Should I engage first gear or release the handbrake first in Subject 2?

How Many Years is the Lifespan of a Gas-Powered Vehicle Generally?

Which part of the tire experiences increased wear when tire pressure is too high?

How often should the engine oil be changed for a car that is not driven frequently?

Is Coasting in Neutral Gear Allowed for Manual Transmission Cars?

What is the function of a stabilizer bar?

What to Do About Three-Cylinder Engine Vibration?

Should the Terra use 92 or 95 gasoline?

What Causes Engine Shaking and Lack of Power?

How to Adjust the BYD Car Audio Equalizer?