What is the difference between EV and PHEV?

2 Answers
AaliyahDella
09/05/25 7:41am
EV and PHEV differ in the following ways: 1. Vehicle driving mode: Battery Electric Vehicle (BEV) refers to a vehicle that uses on-board power as the power source, drives the wheels with an electric motor, meets all requirements of road traffic and safety regulations, and is a pure electric vehicle. The vehicle's operation completely relies on the battery for power supply and does not have a fuel-powered system. PHEV stands for Plug-in Hybrid Electric Vehicle, which can be used as a pure electric vehicle or as a pure fuel-powered vehicle. 2. Environmental impact: Battery Electric Vehicles (BEV) have a relatively smaller environmental impact compared to traditional vehicles.
Was this review help?
15
1
Share
StJade
09/17/25 7:54am
As someone who frequently drives in the city, I find the biggest difference between EVs and PHEVs lies in their power sources. EVs rely solely on battery power, requiring no refueling—just charge and go. They offer exceptionally quiet and smooth driving with zero emissions, making them environmentally friendly. However, their limited range can be a headache for long trips, as I experienced during my out-of-town journey, worrying about running out of charge. PHEVs, on the other hand, combine a battery with a gasoline engine. They can run on electricity for short distances and switch to gasoline mode when the battery is depleted, offering greater flexibility and eliminating sudden breakdowns. This makes them ideal for people like me who occasionally drive on highways. The downside is the added complexity of maintaining both an engine and an electric motor, which slightly increases costs. Personally, I believe choosing between an EV and a PHEV depends on your driving habits. If you mostly drive locally, an EV is hassle-free and eco-friendly. If you frequently travel long distances, a PHEV is the safer bet.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to Check if a Car Has a Loan?

Here are the relevant methods for checking if a car has a loan: 1. Method 1: Check the Motor Vehicle Registration Certificate. You can look at the 'Motor Vehicle Registration Certificate' of the car, where the lending institution will be indicated on the second page of the certificate. Then, you can inquire at that institution. Note that if you are not the owner, you cannot make such an inquiry. 2. Method 2: Visit the personal loan department of the lending bank's branch. This way, the borrower can not only check the loan balance but also request the bank to print a repayment schedule for the year following the inquiry, providing a clear understanding of the loan situation within that year. 3. Method 3: Check via online banking. After activating online banking, you can check the balance without leaving your home. Borrowers typically perform this operation through Personal Loans, My Loans, and Loan Inquiry sections.
14
1
Share

How to Read a Car's Oil Dipstick?

Here is the method to read a car engine's oil dipstick: 1. Pull out the oil dipstick and use a tissue to completely wipe off the oil stuck to the dipstick head. 2. Reinsert the cleaned dipstick all the way in, then pull it out again. 3. Observe the position of the oil stuck on the dipstick. 4. If the oil level is between the upper and lower marks, it indicates the engine oil quantity is appropriate. If it's below the lower mark, you need to add oil. The following conditions are required for reading the dipstick: 1. The engine oil temperature must not be below 60 degrees; 2. Park the vehicle on a level surface, turn off the engine, and wait for three minutes to allow the oil to drain back into the oil pan. Then you can start checking the oil level.
8
5
Share

What Does It Mean When the Water Temperature Gauge Flashes?

When the water temperature gauge flashes, it indicates that the vehicle's antifreeze level is insufficient or the temperature inside the radiator is too high. Below is relevant information: The water temperature warning light is used to indicate the temperature of the coolant in the engine. Some models use colors to display different statuses—blue indicates the coolant is too cold, red means it's too hot, and no light indicates normal operation. If the driver notices that the water temperature warning light on the dashboard remains illuminated while driving, it signifies a malfunction in the vehicle's engine cooling system. The main causes of this issue are: 1. Insufficient antifreeze in the engine, preventing the cooling system from functioning properly, which triggers the warning light. 2. Malfunctioning cooling fans in the engine's cooling system, leading to inadequate heat dissipation during normal vehicle operation, resulting in the water temperature warning light turning on.
15
1
Share

What are the reasons for the EPC light to come on?

Here are the reasons for the EPC light to come on: 1. Intake system failure, such as leakage or blockage; 2. Dirty throttle body or excessive carbon deposits; 3. Substandard fuel selection; 4. Abnormal cylinder pressure or poor working condition; 5. Occasional failure, false alarm; 6. Valve failure, stuck or carbon deposits; 7. ECU failure. Here are the solutions: 1. Troubleshoot the intake system, use qualified fuel, and clean the throttle body; 2. Remove carbon deposits from relevant parts and perform cleaning; 3. If the problem persists after solving other failures, reprogram the ECU-related data.
18
4
Share

What is the actual range of the XPeng P7 with a claimed range of 480km?

XPeng P7 with a claimed range of 480km actually achieves between 550km to 650km depending on the vehicle version. Below are relevant details about the XPeng P7:1. Powertrain: The XPeng P7 is equipped with the latest generation prismatic battery pack, featuring a cell rated energy of 80.87kWh and an energy density as high as 170Wh/kg. It also integrates the motor, electronic control unit, and reducer into a high-performance three-in-one electric drive system.2. Exterior: The XPeng P7 features a coupe-specific streamlined silhouette, with low-drag design elements such as a fastback extending into a ducktail spoiler, semi-hidden wipers, low-drag exterior mirrors, AGS active grille, and an almost completely flat low-drag underbody. These features play a crucial role in reducing the drag coefficient and enhancing the vehicle's range.
20
2
Share

What is the difference between D gear and N gear?

N gear is the neutral gear, which can be used when parking; D gear is the drive gear, which is used when driving. The specific differences between D gear and N gear are as follows: 1. Different usage frequency: D gear is the most frequently used gear on an automatic transmission, while N gear is used less frequently than D gear. 2. Different functions: Neutral gear is used when waiting at a red light or parking for a short time without turning off the engine; D gear is needed when driving. More information about car gears is as follows: 1. P (Parking): Parking gear, starting gear. When the car is parked and not in use, the gear is in this position, and the wheels are mechanically locked to prevent rolling. 2. R (Reverse): Reverse gear. Used when reversing. 3. S (Sport): Sport gear. Engaging this gear delays the engine's upshift timing.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.