What is the difference between E-type multi-link suspension and multi-link suspension?

1 Answers
EvelynLynn
07/24/25 3:58pm
The differences between E-type multi-link suspension and multi-link suspension are: 1. Different composition: The E-type multi-link suspension is a suspension structure composed of three or more connecting rods; the multi-link suspension consists of connecting rods, shock absorbers, and damping springs. 2. Different systems: The E-type multi-link suspension is an improvement of the double-wishbone type and is not entirely considered a double A-arm type; the multi-link suspension belongs to the double A-arm suspension and multi-link suspension systems. The suspension is the general term for all force-transmitting connection devices between the vehicle frame and the axle or wheels. Its functions are: 1. To provide cushioning when the vehicle passes over uneven ground; 2. To ensure that the wheels move within a fixed angle, making steering stable; 3. To support the weight of the wheels; 4. To maintain good contact between the wheels and the ground, ensuring that the driving force and braking force generated between the wheels and the ground are accurately transmitted to the vehicle body.
Was this review help?
8
1
Share
More Forum Discussions

Where is the turn signal flasher located on Sinotruk Howo?

Sinotruk Howo turn signal flasher is located behind the emergency switch. Additional information is as follows: 1. Introduction: The automotive turn signal electronic flasher is a flashing device used to indicate changes in the vehicle's direction of travel. It features a new circuit design, consisting of a low-voltage switch circuit, high-voltage switch circuit, pulse generation circuit, two-stage amplification dual-transistor output circuit, and two sets of light indicator circuits. Installed within the flasher housing, it accurately indicates the vehicle's direction through its control. It is particularly characterized by its automatic protection function, automatically stopping the flasher and bulb operation in the event of a short circuit. The driver can visually monitor the flasher's working condition through the fault indicator installed on the flasher, allowing timely detection and resolution of faults. 2. Inspection of the mechanical steering gear: Check for wear and damage on the pinion and rack, and for cracks on the steering gear housing. Note that parts on the steering gear must not be welded or straightened and can only be replaced. Also, inspect the wear and damage of bearings and bushings, as well as the wear and aging of oil seals and dust covers, and replace them promptly.
4
5
Share

What is the fuel consumption per 100 kilometers for the Wuling Zhiguang 1.0?

There are currently 3 models of the Wuling Zhiguang 1.0 available for sale. Among them, the Wuling Zhiguang 2020 1.2L Van Utility Type National VI-5 Seater and Van Utility Type National VI-2 Seater models, equipped with a 76 horsepower engine, have an NEDC fuel consumption of 6L per 100 kilometers. The Wuling Zhiguang 2020 1.2L Utility Type model, also equipped with a 76 horsepower engine, has an NEDC fuel consumption of 6.3L per 100 kilometers. The fuel tank capacity of all Wuling Zhiguang 1.0 models is 38L. The distance that can be covered with a full tank of fuel is as follows: For the truck models equipped with a 76 horsepower engine, the distance is 38/6*100=633km. For the passenger car models equipped with a 76 horsepower engine, the distance is 38/6.3*100=603km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption.
11
5
Share

Where is the Air Filter Element Located on the Buick New Verano?

Buick New Verano's air filter element is located on the left side of the engine compartment. Below is an extended introduction to the air filter element: 1. The air filter element of the Buick Verano should be replaced every 20,000 kilometers, and the owner can decide the replacement time based on the actual usage of the vehicle. 2. The filter element is the core component of the filter, made of special materials, and is a wearable part that requires special maintenance and care. 3. After the filter has been in operation for a long time, the filter element will have intercepted a certain amount of impurities, leading to increased pressure and reduced flow. At this point, it is necessary to clean it promptly. During cleaning, special attention must be paid to avoid deforming or damaging the filter element.
14
5
Share

Which district in Shanghai does the 'Hu F' license plate belong to?

New cars registered in Shanghai use the 'Hu F' license plate. Shanghai license plates are divided into urban and suburban plates, not by district. 'Hu A', 'B', 'D', 'E', 'F', and 'G' are all urban plates, while 'Hu C' can only be driven outside the outer ring road, meaning it's a suburban plate. Shanghai license plates are not divided by district; the letters before the plates follow a sequential order, from 'Hu A' to 'Hu B', then 'Hu D', 'Hu E', and so on. Here is some relevant information: 1. There are four colors of car license plates in Shanghai: yellow, blue, white, and black. Yellow plates are used for large buses, trucks, and commercial vehicles. The yellow 'Hu C' plate is a suburban plate, which, according to regulations, can only be driven outside the outer ring road, meaning these vehicles cannot enter the urban area. 2. Blue plates are for small passenger cars, private cars, or commercial vehicles. Taxis and private cars in Shanghai use blue plates, including 'Hu A', 'Hu B', 'Hu C', 'Hu D', and 'Hu E', with white characters on a blue background. White plates are used by police, armed police, and military forces. Black plates are for consulates, with white characters on a black background. These plates are relatively rare and are exclusively used by consulates of various countries.
1
4
Share

What are the criteria for identifying yellow-label vehicles?

Yellow-label vehicles are identified based on their exhaust emission standards. The term 'yellow-label vehicle' collectively refers to gasoline vehicles with emission levels below China's National I standard and diesel vehicles below the National III standard when they were first manufactured. These are typically vehicles with high pollution output, concentrated emissions, and poor emission stability. Additional information: Environmental protection labels are divided into green and yellow categories. Gasoline vehicles that meet the National I or higher emission control requirements and standard limits upon initial registration, as well as diesel vehicles compliant with National III standards or above, are issued green environmental labels. All other vehicles receive yellow environmental labels (i.e., yellow-label vehicles).
18
1
Share

Do tires need to be replaced after 5 years of use?

Tires that have been used for 5 years do not necessarily need to be replaced. Car tires typically last 6-8 years before needing replacement. Tire manufacturers do not provide a definitive lifespan for tires, but generally recommend replacement after 3 to 5 years or after traveling 60,000 to 80,000 kilometers. The actual replacement should be based on the tire's mileage or wear condition after inspection. The service life of car tires is closely related to the driving environment and driving habits. Car owners should pay attention to the tire wear indicators. When the tread wear reaches 1.6 millimeters, the tires should be replaced promptly to avoid abnormalities during use that could affect driving safety. When determining whether tires need replacement, consider the following conditions: Tire sidewalls have wear limit indicators. When the tread reaches this indicator, immediate replacement is necessary. Damaged tires, such as those with cracks, bulges on the tread, or uneven wear, should also be replaced promptly. Additionally, tires that have been patched multiple times during use should be replaced. Since tires are made of rubber, they undergo varying degrees of aging over time. If tires have been in use for an extended period, regular inspections by professionals are recommended. Car tire maintenance methods: Regularly check tire pressure; remove debris from tread grooves; inspect tire wear and replace as needed based on wear condition; perform tire rotation—rotating tires ensures even wear across all four tires, preventing excessive wear.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.