Browse

Antiques Collectibles Apparel Baby Kids Items Books， Movies And Music Electronics Free Stuff Garden Outdoor Health Beauty Home Goods Home Improvement Supplies Musical Instruments Office Supplies Pet Supplies Sporting Goods Ticket Toys Games Transportation Others

Used Cars New Cars Others

Business Crafts Design And Web Events Home Improvement Legal Lessons Personal Pets Photography Repair And Technical Support Wellness Writing， Translation， And Transcription Others

Activities & Groups Artists & Musicians Classes & Lessons Events Friendship & Networking Lost & Found Rideshare Sports Teams Volunteers Travel & Travel Partners Skills & Language Swap Other

What is the difference between D and S gear in Golf?

1 Answers

VanFinn

07/30/25 5:39am

The differences between D and S gear in Golf are as follows: 1. S gear is more responsive than D gear: After shifting into S gear, the upshift is delayed. While driving, if you suddenly press the accelerator, S gear will respond quickly, whereas D gear will take a bit more time. When you press the accelerator, S gear provides a more direct driving experience, while D gear is relatively smoother. 2. S gear consumes more fuel than D gear: While pursuing speed advantages, S gear also maximizes power output. Long-term use of S gear increases air intake, naturally resulting in higher fuel consumption compared to D gear. However, you won't experience the driving pleasure of S gear in D mode. 3. S gear is more powerful for uphill driving: When climbing a slope without switching to S gear, you may notice some unusual noises from the car's engine. This occurs because the engine cannot provide sufficient power at low RPMs, so it's advisable to use S gear for uphill driving.

Was this review help?

20

1

Share

More Forum Discussions

What does it mean to drive in a non-compliant lane?

Driving in a non-compliant lane refers to operating a motor vehicle without adhering to the designated lane regulations, typically including not driving in the correct lane, straddling or crossing lane lines. Below is an introduction to motor vehicles:1. Introduction: The English name for motor vehicles is MV, which translates to "motor vehicles" in Chinese.2. Principle: These are wheeled vehicles driven or towed by a power device, used on roads for transporting passengers or goods, performing specialized tasks, and include certain recreational facilities.3. Additional Information: They can be categorized into cars and car trains, motorcycles and mopeds, tractor transport units, wheeled special machinery vehicles, and electric vehicles, among others.

Where is the location for license replacement and renewal?

Replacement locations: Vehicle Management Office driver's license service hall counters, driver's license service centers, and county (city, district) vehicle management offices. Below are the relevant details: 1. Application requirements: Motor vehicle drivers should apply for license renewal at the issuing vehicle management office within 90 days before the expiration of their current license. When applying, they must complete the 'Motor Vehicle Driver's License Application Form' and submit the original ID of the driver, the original driver's license, a medical certificate from a county-level or military regiment-level medical institution, and three standard photos. 2. Additional information: When applying, the application form must be completed, and the following documents must be submitted: the motor vehicle driver's ID and the motor vehicle driver's license.

Will Carbon Deposit Cleaning Block the Catalytic Converter?

Cleaning carbon deposits will not block the catalytic converter. This is because fuel additives clean carbon deposits gradually, and the particles removed are very small, so they will not cause the catalytic converter to become blocked. Below is an introduction to the automotive catalytic converter: 1. Appearance: The catalytic converter looks like a metal can from the outside, but inside it contains a 'substrate' for purifying exhaust gases. This honeycomb-shaped ceramic substrate is coated with a precious metal slurry, primarily composed of platinum, rhodium, and palladium. 2. Exhaust Gas Purification Function: The precious metals act as catalysts, reducing HC and CO in the exhaust gases into water and CO2, while decomposing NOx into nitrogen and oxygen. This is the exhaust gas purification function of the catalytic converter.

What engine does the Volvo S40 have?

Volvo S40 is equipped with a 2.0L naturally aspirated engine, with a maximum power of 103kw and a peak torque of 185nm, paired with a 6-speed dual-clutch transmission. An engine is a machine that converts other forms of energy into mechanical energy, originating in the UK. It can refer to either the power generation device or the entire machine including the power unit. The Volvo S40 is a model under the Volvo brand, with body dimensions of 4676mm in length, 1770mm in width, and 1454mm in height, and a wheelbase of 2640mm. In terms of interior, the Volvo S40 is simple yet elegant, with a decorative style full of charm and harmonious colors, where different colors create different styles.

What Causes the Reverse Light to Not Work?

The reasons why the reverse light does not work are: 1. Fuse short circuit; 2. Damaged reverse light switch; 3. Short circuit in the reverse light bulb; 4. Short circuit in the connecting wires or loose connectors. The reverse light is installed at the rear of the car to illuminate the road behind and warn vehicles and pedestrians behind that the car is reversing. All reverse lights are white. Methods for troubleshooting and fixing reverse light failure: 1. If both reverse lights do not work, first check if the fuse is short-circuited; 2. If the fuse is intact, engage the reverse gear and check whether the voltage on the black wire at the lamp holder is normal; 3. If the voltage is normal, check whether the reverse light bulb is damaged and whether the ground wire contact is good.

What Causes the Constant Ticking Sound in the Engine?

The constant ticking sound in the engine is caused by: aging or loosening of engine mounts and an overly rich air-fuel mixture. Additionally, the engine may produce a ticking sound during cold starts. Aging or loosening of engine mounts: Engine mounts are rubber blocks placed between the engine and the frame to reduce vibrations and provide cushioning during engine operation, as well as to secure the engine in place. When these mounts age or become loose, the engine may start to shake. Overly rich air-fuel mixture: When the air-fuel mixture is too rich, the engine may experience difficulty accelerating after startup, uneven operation, black smoke from the exhaust pipe, and a ticking sound. Cold start noise: During a cold start, a ticking sound can often be heard coming from the engine compartment.

Trending Ranking

How to Renew a Temporary License Plate?

What Causes the Slow Throttle Response in Lavida Plus?

Why Are the Brake Calipers of Good Cars Positioned at the Rear?

When Can Temporary License Plates Be Collected?

What are the reasons for abnormal display of the engine oil pressure gauge?

What is the function of the S gear in an automatic transmission car?

MG GT Tire Model

Is an advance appointment required for the study and verification of deducted points on a driver's license?

How Often Should Family Cars Undergo Inspection

Does Rain Affect the Car After Paint Repair?

More Forum Discussions

What does it mean to not slow down as required?

What Causes Loud Engine Noise and Weak Acceleration?

What does push-sync mean on a Honda car?

What is a Torque Vectoring System?

Help

Cookie

Cookie Settings

© 2025 Servanan International Pte. Ltd.