What is the Difference Between Crystal Coating and Film Coating?

1 Answers
MatteoLynn
07/24/25 9:29pm
Film coating involves polishing the paint surface and then applying a high-grade wax to form a protective film. Crystal coating, on the other hand, involves creating a mirror-like finish on the paint surface to restore it to a new-car condition, followed by applying a durable invisible barrier. Below is an introduction to the similarities and differences between film coating and crystal coating: 1. Similarities: (1) Same working principle: Both film coating and crystal coating involve applying a substance to the car's paint surface to isolate it from air, UV rays, and harmful substances, thereby protecting the paint. (2) Same construction process: Both film coating and crystal coating generally consist of core steps such as deep cleaning, masking, polishing, cleaning and drying, coating application, and final cleaning. (3) Same construction time: Both film coating and crystal coating take approximately 3-4 hours to complete, with similar construction times. 2. Differences: (1) Different project meanings: The literal meaning of car film coating is to cover the paint with a protective film, emphasizing protection. The literal meaning of car crystal coating is to cover the paint surface with a crystalline layer, also emphasizing protection. (2) Different protective effects: Organic film coatings fall under the category of basic protection, emphasizing the enhancement of the paint's oxidation resistance and brightening effect. (3) Different durability: Organic film coatings typically last 6-12 months; inorganic film coatings last over 36 months; crystal coatings generally last 12-18 months.
Was this review help?
17
2
Share
More Forum Discussions

What causes the Jinbei vehicle to lack power when accelerating?

There are several reasons why a Jinbei vehicle may lack power when accelerating: clutch slippage, poor fuel quality, and carbon buildup on the throttle body. The specific details are as follows: Clutch slippage: When you press the accelerator hard, the engine RPM increases quickly, but the vehicle speed does not increase accordingly. Replacing the clutch disc can resolve this issue. Poor fuel quality: Using low-quality fuel can affect the gasoline filter and fuel lines, potentially leading to poor fuel delivery and resulting in weak acceleration. Carbon buildup on the throttle body: Carbon deposits accumulating on the throttle body can restrict the air intake, leading to insufficient engine power and difficulty in accelerating. The solution is to clean the throttle body.
10
4
Share

Will driving at 80 in a 50 speed limit zone result in 12 penalty points?

Driving at 80 in a 50 speed limit zone will result in 12 penalty points because the vehicle exceeded the speed limit by more than 50%. Below are specific details about speeding: Speeding: Exceeding the speed limit by more than 50% will result in an immediate deduction of 12 points. The fine amount will gradually double as the speeding increases, capping when the speed exceeds 100% of the limit. Study: The motor vehicle driver must, within fifteen days, report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred, to participate in a seven-day study of road traffic safety laws, regulations, and related knowledge. After the driver completes the study, the vehicle management office must conduct an examination on road traffic safety laws, regulations, and related knowledge within twenty days.
8
0
Share

What are the differences between the extended and standard Panamera?

The differences between the extended and standard Panamera are as follows: 1. Different appearance: The extended version has a larger interior space and longer overall length. The wheelbase of the extended Panamera is 50mm longer than the standard version, and the overall length is increased by 150mm. 2. Different powertrain: The standard version is equipped with a 2.9-liter twin-turbocharged V6 engine with a maximum power output of 243kW and maximum torque of 450Nm. This engine delivers peak power at 5400-6400 rpm and maximum torque at 1340-4900 rpm. The extended version features a 4.0-liter V8 twin-turbocharged engine producing 338kW maximum power and 620Nm maximum torque. This engine reaches peak power at 6000-6500 rpm and maximum torque at 1800-4500 rpm.
12
1
Share

Types of Vehicle Speed Sensors?

Vehicle speed sensors are divided into three types: magnetic speed sensors, Hall-type speed sensors, and photoelectric speed sensors. The main functions of the vehicle speed sensor are as follows: 1. The vehicle speedometer displays the driving speed of the car through the swing of a pointer. 2. Simply put, the speedometer contains a system (including a rotating disk with a pointer shaft, a rotating shaft with permanent magnets, bearings, hairsprings, and other components) that controls the swing of the pointer. The swing amplitude of the pointer is ultimately determined by the rotational speed output from the transmission (i.e., the rotating shaft of the speedometer is driven by a flexible shaft, which is connected to the worm gear in the worm-gear transmission pair on the output shaft of the car's transmission or transfer case). 3. Due to the manufacturing process of the components themselves, assembly errors, natural wear during use, and changes in the magnetism of magnetic components, all can cause indication errors in the speedometer.
19
4
Share

What to Do When the Roewe RX5 Battery Runs Out of Power?

When the Roewe RX5 battery runs out of power, you can use jumper cables to charge the battery. Here are some key points about car batteries: 1. Car batteries have a limited lifespan: Under normal circumstances, after 2-3 years of use, the car battery will show signs of aging. The service life of a car battery is directly related to the driver's usage habits and maintenance practices. 2. Long-term inactivity: The battery power will gradually deplete, making it difficult to start the car when you try to use it again. 3. Before connecting jumper cables to the Roewe RX5 battery, always turn off the engine first; after connecting the cables, ensure the positive and negative terminals do not come into contact to prevent short circuits; when removing the jumper cables, disconnect the negative terminal first, followed by the positive terminal.
3
5
Share

What are the reasons for the failure to switch from gasoline to gas in a conversion system?

When a vehicle fails to switch from gasoline to gas in a conversion system, it is usually due to a malfunction in the conversion system. Check the internal logic circuit of the switch to ensure it is functioning properly, inspect the power supply lines of the switch to guarantee they are intact and connected. Examine the low-pressure outlet solenoid valve of the pressure reducer and its connecting circuit, and verify whether the idle speed node is receiving a signal. Below is more detailed information: Gasoline-to-gas conversion: This refers to a modification method that changes the fuel type of a vehicle, specifically converting a vehicle originally powered by gasoline to one that runs on natural gas. Disadvantages of gasoline-to-gas conversion: There are some drawbacks to this conversion. Due to the lower energy density of gaseous fuels, natural gas vehicles carry less fuel, resulting in a shorter driving range compared to gasoline-powered vehicles.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.