What is the difference between commercial and non-commercial pickup trucks?

1 Answers
DeCaroline
07/30/25 6:35am
The differences between commercial and non-commercial pickup trucks are as follows: 1. Different nature: Commercial vehicles refer to automobiles that are specifically designed to provide transportation services to society, with the purpose of charging transportation fees and involving cost settlements; Non-commercial vehicles are motor vehicles not intended for profit-making purposes. 2. Different usage nature on the vehicle license: The usage nature of commercial vehicles on the vehicle license is 'commercial,' and they must have the (operating license) issued by the transport management department and the (work permit) that the driver of commercial vehicles must possess to engage in commercial operations; The usage nature of non-commercial vehicles on the vehicle license is 'non-commercial,' and there is no need to go through relevant commercial operation procedures.
Was this review help?
10
3
Share
More Forum Discussions

Do I still need to turn on the low beam if I have automatic headlights?

With automatic headlights, there is no need to manually turn on the low beam. When the light control lever is set to automatic headlight mode, the vehicle will automatically turn the low beam on or off based on the surrounding light conditions. Automatic headlights are designed to provide convenience for drivers and enhance driving safety. When the light-sensing control system detects that the external light intensity exceeds or falls below a certain threshold, the car's headlights will automatically illuminate or turn off. The headlight assembly consists of a lamp cover, bulb, socket, reflector, lens, and light adjustment mechanism. The working principle of automatic headlights involves the central intelligent control chip determining brightness changes in the external environment through light sensors and executing the operation of turning the lights on or off.
6
1
Share

Is Electric Four-Wheel Drive Full-Time or On-Demand Four-Wheel Drive?

Electric four-wheel drive is on-demand four-wheel drive. Electric four-wheel drive allows for multiple power sources, which can be either a traditional engine or an electric motor, whereas full-time four-wheel drive has only one power source, namely the engine. In terms of reaction speed, electric four-wheel drive responds faster. Below is a detailed introduction to electric four-wheel drive: Principle of Electric Four-Wheel Drive: In electric four-wheel drive, the front axle has an engine and a drive motor as power sources, while the rear axle is driven by its own independent drive motor with a power output of up to 180 kilowatts. Therefore, there is no need for complex physical structures to transmit power between the front and rear axles. In contrast, full-time four-wheel drive in fuel-powered vehicles has only one power source—an engine. To achieve four-wheel drive, the driving force must be distributed. If the engine is front-mounted, the power must be transmitted to the rear axle via a driveshaft and then distributed to the rear wheels. Power Source of Electric Four-Wheel Drive: Electric four-wheel drive can rely on electric motors to generate power, so it does not require excessive components to achieve four-wheel drive. Traditional four-wheel drive systems, on the other hand, require more components and are relatively more complex. Additionally, it is important to note that for traditional four-wheel drive systems, performance is largely determined by hardware. For electric four-wheel drive technology, performance is more often determined by software.
7
4
Share

What to do if the Volkswagen SOS emergency call function malfunctions?

The solution to the malfunction of the Volkswagen SOS emergency call function is: it is necessary to go to a maintenance institution for inspection and repair. SOS is an onboard self-rescue system. When the vehicle malfunctions or is involved in an accident, or when facing dangerous and sudden situations, find the SOS button and hold it for more than 2 seconds. The vehicle's emergency warning and rescue system will automatically send out a distress signal and actively call emergency departments. Taking the 2021 Bora 1.5L Manual Fashion Smart Connect Edition under FAW-Volkswagen as an example: the manufacturer of this car is FAW-Volkswagen, the class is compact car, the intake form is naturally aspirated, the maximum horsepower is 113ps, and the maximum torque is 145nm.
2
1
Share

What is a C1F driver's license?

C1F is a combined driver's license that merges the C1 and F licenses. Since each driver can only hold one driver's license, when adding permitted vehicle types to an existing license, the two categories are combined into a single license, resulting in this designation. Holding this license allows the driver to operate both C1-permitted vehicles and light motorcycles. Driver's license classifications: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. C1 driver's license: The C1 driver's license is one type of motor vehicle driver's license classification. The C1 license permits driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; and passenger vehicles with seating capacity of 9 or fewer people.
9
4
Share

Why do newly replaced brake pads make a sharp noise?

The reasons for the sharp noise from newly replaced brake pads are: 1. The contact surfaces do not match, as the old brake disc was not resurfaced when installing new brake pads; 2. There is a defect in the brake system itself, causing the brake pads to only partially contact the brake disc, which increases the pressure per unit area during braking and results in abnormal noise. It is recommended to inspect components such as the caliper and guide pins. The method for replacing brake pads is: 1. Open the engine compartment and check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the caliper bolts and take out the old brake pads; 4. Install the new brake pads and tighten the guide bolts.
6
5
Share

What is the license plate prefix for Laibin?

Laibin's license plate prefix is Gui G. Laibin belongs to Guangxi, and the license plate codes for various regions in Guangxi are as follows: Gui A is Nanning, Gui B is Liuzhou, Gui C is Guilin, Gui D is Wuzhou, Gui E is Beihai, Gui F is Chongzuo, Gui G is Laibin, Gui H is Guilin (former Guilin region), Gui J is Hezhou, Gui K is Yulin, Gui L is Baise, Gui M is Hechi, Gui N is Qinzhou, Gui O is for district-level units, Gui P is Fangchenggang, Gui R is Guigang. License plates, commonly known as car plates, are panels hung at the front and rear of vehicles, typically made of aluminum, sheet iron, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.