What is the difference between Class A and Class B cars?

How to Disassemble the BYD F3 Remote Key?

BYD F3 remote key disassembly method is: 1. Remove the mechanical key; 2. Along the place where the mechanical key is stored, forcefully pry open the outer shell of the key; 3. After opening the shell, use a blade to pry out the battery; 4. Replace with a new battery and restore the remote key's outer shell to its original state. The BYD F3 is an A+ class passenger car produced by BYD Auto. The dimensions of this car are 4533mm in length, 1705mm in width, and 1490mm in height, with a wheelbase of 2600mm. The interior design of the BYD F3 is simple and elegant, featuring a fresh light-colored interior and comprehensive, rich configurations.

15

1

Share

Where is the trunk switch located in the cabin of the BMW X2?

The trunk switch of the BMW X2 is located below the driver's side door in the cabin, with a trunk capacity ranging from 505 to 1650 liters depending on the folding degree of the rear seats. Before each drive, owners should check whether the trunk lock is securely engaged. Even if locked, a poorly engaged lock may cause the trunk to open suddenly, posing a potential safety hazard during driving. The BMW X2 is a compact SUV under the BMW brand, with dimensions of 4379mm in length, 1824mm in width, and 1555mm in height, and a wheelbase of 2670mm. In terms of exterior design, the BMW X2 features signature kidney grilles and expanded LED headlights. The kidney grilles adopt an innovative design language with a narrower top and wider bottom, further lowering the visual height of the front fascia.

15

5

Share

What is the displacement of the Mercedes-Benz GLB?

Mercedes-Benz GLB is equipped with a 1.3-liter displacement engine. This engine is a 1.3T turbocharged engine, model M282, jointly developed by the Renault-Nissan Alliance and Mercedes-Benz. It has a maximum power of 120kW and a maximum torque of 250Nm. The transmission system is matched with a 7-speed dual-clutch transmission. The Mercedes-Benz GLB is positioned as a compact SUV with a seven-seat layout, making it the first compact SUV from Mercedes-Benz to feature a seven-seat design. The front suspension of the Mercedes-Benz GLB uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.

4

3

Share

What does the transmission mainly refer to?

Transmission mainly refers to the gearbox of a car, which is divided into manual and automatic types. The manual transmission is mainly composed of gears and shafts, achieving speed and torque variation through different gear combinations. The automatic transmission (AT) consists of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixing or changing the transmission ratio between the output shaft and input shaft in steps, also known as the gearbox. The transmission is composed of a transmission mechanism and a control mechanism, with some cars also having a power take-off mechanism. Most transmission mechanisms use ordinary gear transmission, while some use planetary gear transmission. Ordinary gear transmission mechanisms generally use sliding gears and synchronizers.

8

1

Share

Can Used Cars Meeting China 5 Emission Standards Be Licensed?

Used cars meeting China 5 emission standards can be licensed, as the implementation of China 6 emission standards and restrictions on China 5 licensing mainly target new vehicles. The China Fifth Stage Motor Vehicle Pollutant Emission Standard, abbreviated as "China 5 Standard," has a control level equivalent to the European Stage 5 emission standard. The China 5 Standard imposes more stringent restrictions on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China I to China IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. Used cars refer to motor vehicles that are registered with the public security traffic management authorities, serve within the economically practical lifespan or before reaching the national scrapping standards, and can still be used.

15

0

Share

How to Check for Car Air Conditioning Leaks?

Methods to check for car air conditioning leaks: 1. Soap water leak detection: Fill the system with nitrogen at 10 to 20 kg/cm² pressure, then apply soapy water to various parts of the system. Bubbles will appear at the leak points. 2. Nitrogen water leak detection: Fill the system with nitrogen at 10 to 20 kg/cm² pressure and immerse the system in water. Bubbles will indicate the leak points. 3. Halogen lamp leak detection: Light the leak detection lamp and hold the air tube of the halogen lamp. When the tube opening is near a leak point in the system, the flame color will turn purple-blue, indicating a significant leak. 4. Gas differential pressure leak detection: Utilize the pressure difference inside and outside the system, amplify the pressure difference through a sensor, and express the leak detection result in digital, sound, or electronic signal form. This method can only qualitatively determine whether the system is leaking but cannot accurately locate the leak point.

6

5

Share

What is the difference between Class A and Class B cars?

How to Disassemble the BYD F3 Remote Key?

Where is the trunk switch located in the cabin of the BMW X2?

What is the displacement of the Mercedes-Benz GLB?

What does the transmission mainly refer to?

Can Used Cars Meeting China 5 Emission Standards Be Licensed?

How to Check for Car Air Conditioning Leaks?

Can a patched tire be patched again?

How often should a motorcycle driver's license be renewed?

How many points are deducted for speed and gear mismatch?

Is the BMW X1 transmission dry or wet?