What is the difference between CLA and C?

1 Answers
PeterLynn
07/30/25 9:35am
Here are the differences between CLA and C: 1. Vehicle type: The C-Class belongs to the mid-size car category, while the CLA is a compact car. The CLA is the sedan version of the Mercedes-Benz A-Class, featuring front-engine, front-wheel drive, whereas the C-Class is one level higher, with front-engine, rear-wheel drive. Both models have high-end versions with all-wheel drive. 2. Powertrain: Both cars use 1.6T and 2.0T engines, but the transmissions differ. The C-Class is paired with a 9-speed automatic transmission, while the CLA uses a 7-speed dual-clutch transmission. 3. Exterior: The CLA measures 4654*1777*1413mm in length, width, and height, with a wheelbase of 2699mm. The CLA is slightly smaller than the C-Class and features a coupe-like style with frameless doors and a fastback design, making it very stylish. The Mercedes-Benz C-Class is more practical, measuring 4714*1810*442mm in length, width, and height, with a wheelbase of 2840mm.
Was this review help?
12
2
Share
More Forum Discussions

What are the dimensions of the Hongqi HS5?

Hongqi HS5 vehicle dimensions are: length 4.76 meters, width 1.907 meters, height 1.7 meters, wheelbase 2.87 meters. Specific details about the Hongqi HS5 are as follows: 1. Configuration: The Hongqi HS5 comes standard with: flag-type full LED lighting system, automatic headlight height adjustment, "Hongqi Wings" welcome light carpet, electric folding and heated mirrors, front and rear parking radar, rear camera, dual 12.3-inch integrated full LCD color display, multifunction steering wheel, etc. 2. Price: The official guide price ranges between 180,000-250,000 yuan. 3. Engine: The Hongqi HS5 is equipped with a low-power version CA4GC inline four-cylinder turbocharged direct injection engine, rated power 165kW, maximum torque 340N·m.
6
2
Share

Which gear should be engaged for long-term parking?

For long-term parking, it is usually recommended to engage the P (Park) gear. After parking, you should first apply the handbrake, then shift the gear to P, and finally release the brake, turn off the engine, and remove the key. This ensures that the vehicle has braking force, making it safer. Below is an introduction to the specific gears of a vehicle: 1. D gear, also known as the Drive gear, is used for forward movement. 2. P gear, the Park gear, is used when the vehicle is parked for an extended period. 3. R gear, the Reverse gear, is engaged when the vehicle needs to move backward. 4. N gear is the Neutral gear. 5. S stands for Sport mode.
1
0
Share

What Are the Consequences of Overfilling Car Antifreeze?

Overfilling antifreeze from reputable brands generally has no significant impact. The excess antifreeze will expand due to heat during vehicle operation and overflow through the pressure relief valve, causing no harm other than leaving some stains. However, it is advisable to use a syringe to remove the antifreeze that exceeds the maximum level. In contrast, antifreeze produced by substandard manufacturers may be corrosive, potentially damaging the cooling system. Overflowing excess antifreeze can also harm electrical wiring and other components in the engine compartment, and in severe cases, it may corrode the radiator and flow into the engine. Vehicle antifreeze typically needs to be replaced every 2 years or 40,000 kilometers. This is just a general guideline. For commercial vehicles with higher mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement schedule should be based on actual usage. Regularly check the antifreeze level and top it up if it is low. If suspended particles, sediment, or discoloration are observed in the antifreeze, replace it immediately and clean the system. Methods to determine if antifreeze is low: 1. Observe the antifreeze warning light on the dashboard. If it illuminates, it may indicate low antifreeze levels, though it could also be triggered by excessively high engine temperatures. 2. Inspect the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. 3. Check the water level markings on the antifreeze overflow tank. The normal antifreeze level should be between the maximum and minimum marks. If it falls below the minimum mark, it indicates a deficiency.
20
1
Share

After how many kilometers should a car undergo a major maintenance?

Cars are typically maintained every 5,000 kilometers. The specific details about car maintenance are as follows: 1. Definition of Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. 2. Maintenance Items: Changing engine oil and oil filter, replacing air filter, checking spark plugs, replacing fuel filter, adding brake fluid, replacing transmission oil, cleaning throttle body, cleaning fuel injectors, inspecting tires and braking system, replacing cabin air filter, and replacing engine belt. 3. Purpose: To keep the car clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process of parts, and extend their service life.
19
2
Share

What is the difference between H4 and H7 car bulbs?

H4 and H7 are types of car bulbs, differing in function, structure, and applicable vehicle models. The specific differences are as follows: 1. Different functions: H4 is generally used for high and low beams; H7 is usually used for low beams. 2. Different structures: H4 consists of three terminals with a base that has two locking tabs; H7 consists of two terminals with a base that has one locking tab. 3. Different applicable models: H4 is suitable for models such as Leopard, Pajero, Jetta, Bora, Sail, etc.; H7 is suitable for models such as Audi A6, Regal, Excelle, Passat, Mazda 3, etc.
18
1
Share

What does the L gear in an automatic transmission mean?

L gear stands for LOW, meaning low gear. This is the same as the "1" gear in a manual transmission, both designed to keep the transmission in the lowest gear to obtain high torque without upshifting. Below is an introduction to the gears in an automatic transmission car: 1. D gear, also known as drive gear or forward gear. 2. P gear is the parking gear, used when the vehicle is parked for an extended period. 3. R gear is the reverse gear, engaged when the vehicle needs to move backward. 4. N gear is the neutral gear. 5. S stands for sport mode.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.