What is the difference between Civic National 5 and National 6?

1 Answers
Andrea
07/25/25 4:25am
The biggest difference between Civic National 5 and National 6 standards lies in the emission regulations. Specifically, the National 6 emission limits are more stringent compared to the National 5 phase. The Civic models currently on sale include both National 5 and National 6 emission standards, with no difference in price or configuration between the two. Below is an introduction to the Civic: 1. The latest Civic models on sale are the 2020 models, with a total of 16 variants available, divided into National 5 and National 6 emission standards. 2. There are two powertrain options: The first: equipped with a 1.0-liter inline 3-cylinder turbocharged engine, paired with a CVT transmission, delivering a maximum power of 92 KW and a maximum torque of 173 N·m; The second: equipped with a 1.5-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or CVT transmission, delivering a maximum power of 130 KW and a maximum torque of 226 N·m.
Was this review help?
4
3
Share
More Forum Discussions

How is car fuel cost calculated?

First, fill up the fuel tank (until the pump nozzle clicks off), reset the trip meter to zero. After the second fill-up (also until the nozzle clicks off), divide the amount of fuel added the second time by the kilometers driven since the trip meter was reset to get the actual fuel consumption. Then multiply by the unit price of gasoline. Below is the calculation method for gasoline cost: 1. Fill up the fuel tank until the pump nozzle clicks off, and reset the trip meter to zero. Try to drive as many kilometers as possible, as too few will result in inaccurate calculations. The next time you refuel, fill up until the nozzle clicks off again. Then, divide the liters of fuel added by the kilometers shown on the trip meter, move the decimal point two places to the right, and this number will be the car's fuel consumption per 100 kilometers. 2. If the car is equipped with an onboard computer, even better, as the instant fuel consumption and average fuel consumption will be automatically displayed on the dashboard screen.
12
1
Share

What is the best tire pressure for winter?

On the basis of standard air pressure, it is appropriate to increase by about 0.2bar. The following are relevant information about tire pressure: 1. The standard tire pressure for a car can be found in the car's maintenance manual. Some cars also have reference values for standard tire pressure on the label next to the driver's door (near the B-pillar), or even on the fuel tank cap. Adjusting the car's tire pressure is not a specific value; it also depends on the usual driving environment and habits. If you cannot adjust it yourself, you can go to a related 4S store for adjustment, which can better improve driving safety. 2. If the tire pressure is too high, it will increase the tire's friction and reduce the tire's adhesion. In emergency situations, the braking effect will be poor, and driving safety cannot be guaranteed. You may also feel vibration in the steering wheel while driving, accompanied by phenomena such as deviation, which will reduce driving comfort.
17
1
Share

What is the effective range of a car remote control?

The maximum reception distance for a car remote control is approximately 50 meters, which is achievable only under conditions without any electronic interference or obstacles blocking the signal. Typically, the signal is strongest and easiest to receive within a range of about 10 meters. Additionally, the reception distance is related to factors such as the quality of the remote key. The following situations can cause the control range of a car remote key to become shorter: Low battery in the key: As the battery power decreases, the transmission power is naturally affected, leading to a shorter control distance or malfunction. Replacing the battery can resolve this issue. Obstacles around the car blocking signal transmission: For example, trees, walls, etc. Changing the angle or position can help.
1
4
Share

What is the reason for the car remote not responding and the car not starting?

Detailed explanation of the specific reasons why the car remote does not respond and the car fails to start: Strong magnetic field interference causing no response: During use, avoid exposing the smart remote key to strong magnetic fields. For instance, try to avoid parking the vehicle near high-voltage power lines, transmission towers, or other areas with strong magnetic signals. Since smart keys use low-intensity radio waves, they may not function properly when subjected to magnetic interference. Damaged smart key causing no response: Dropping or throwing the smart key can lead to poor contact, even if the outer shell is thick. Therefore, it is advisable to avoid dropping or throwing the smart key during use.
9
1
Share

What causes unstable charging current?

Unstable charging current may be caused by a slipping fan belt. Below are the reasons and solutions for unstable charging current: 1. Unstable charging current may be due to poor wiring connection between the battery and the generator armature terminal; dirty slip rings or poor contact between the carbon brush and slip ring, weak carbon brush spring; burned or dirty regulator contacts, etc. When the alternator is operating, the ammeter needle swings back and forth, the charging indicator light flickers, and the headlights dim and brighten intermittently during nighttime driving. This indicates unstable charging current from the generator. 2. Charging system inspection: Check if the generator drive belt tension is appropriate, replace or adjust as needed. Inspect the engine drive belt tensioner and replace if necessary. Examine the wiring connections between the generator and battery terminals. Use a test light to check the generator while the engine runs steadily. If the test light brightness fluctuates, it indicates a generator fault. If necessary, disassemble and inspect the generator, checking the brush contact condition and whether there is poor contact in the rotor and stator coils.
15
3
Share

How to Repair Small White Spots on Windshield?

A small white spot appears on the windshield, use a clean cloth dipped in toothpaste and apply more force to rub the spot. Here are the methods to repair small white spots on the windshield: 1. For dense small white spots on the car windshield, you can purchase and use a specialized tar remover, or use paint thinner, commonly known as banana oil. Additionally, gasoline can effectively remove paint stains—dip a towel in it and wipe. Alternatively, you can purchase and use car clay, which can act as a polishing agent when rubbed on the glass. 2. For repairing small white spots on the front windshield, the best approach is to have it treated at a professional auto beauty shop. If the front windshield surface is blurry with stains, polishing can be performed to remove surface pores and stains, restoring the glass to its original clarity. If there are cracks on the front windshield, small cracks can be repaired by using repair tools to fill the cracks with repair fluid. Once the repair fluid solidifies, it can conceal the damage and prevent further cracking, serving a repair function. However, if the cracks are large, they cannot be repaired, and the glass will need to be replaced.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.