What is the difference between BYD F0 with and without a small meter?

1 Answers
LaPaul
07/30/25 3:22am
BYD F0 with a small meter refers to the tachometer, which is not available in the base model but is included in the higher-end model. The BYD F0 is a premium compact car launched by BYD. It features a stylish design and is equipped with the BYD371QA high-performance eco-friendly engine developed by BYD. With a displacement of 1.0L, it meets the National IV emission standards and has a fuel consumption of only 4.2L per 100 kilometers. In terms of safety features, the F0 comes with dual airbags, ABS, power steering, and more. Additional Information: 1. Content One: Tachometers are typically divided into several zones. The white scale indicates the safe RPM range, while the red scale marks the dangerous RPM range. Some models also include a green zone, which indicates the most fuel-efficient RPM range for the engine. 2. Content Two: As long as the engine RPM does not enter the dangerous range, it is considered normal. However, it is important to ensure that the RPM matches the current gear. Otherwise, driving at high RPM in low gear or low RPM in high gear can cause unnecessary damage to the vehicle.
Was this review help?
7
2
Share
More Forum Discussions

What does 38km/h mean?

38km/h means 38 kilometers per hour. Below are specific details about gear shifting: 1. Gears: Start in first gear, then shift to second gear after driving a few meters. Shift to third gear when the speed reaches above 20 mph but below 35 mph, shift to fourth gear when the speed reaches above 35 mph but below 45 mph, and shift to fifth gear when the speed exceeds 45 mph. 2. Precautions: While shifting gears, the clutch and throttle must be coordinated properly. Press the clutch pedal all the way down, then release the throttle pedal, and quickly shift to the corresponding gear. After shifting, immediately release your hand from the gear lever to avoid prolonged contact, which can easily damage the gear lever.
11
5
Share

What's the matter with the coolant bypass valve start open circuit?

You can replace the water pump assembly. The water seal is prone to aging and water ingress, which can easily cause motor damage and lead to the bypass valve start open circuit. If the valve body is not damaged, you can replace the small electric water pump connected to the coolant booster. Precautions for using automotive coolant: 1. Correct use of coolant: It can prevent corrosion, cavitation leakage, radiator boiling, scale formation, and freezing, keeping the cooling system in optimal working condition and ensuring the engine operates at normal temperature. 2. Note: If not used properly, it will seriously affect the normal performance and lifespan of the engine. 3. Continuity of coolant use: The idea of only using it in winter is wrong, as it only considers the antifreeze function of the coolant while neglecting its anti-corrosion, anti-boiling, and anti-scale effects.
18
0
Share

What is the reason for one car door not responding to the remote control?

The failure of one car door in the central locking system is mostly caused by a damaged door lock motor or a short circuit in the wiring. It could also be due to a malfunction in the mechanical transmission device. Here is some additional information: 1. Introduction: The central locking system, also known as central control door locks, is increasingly installed in many vehicles to enhance convenience and driving safety. 2. Advantages: The wireless remote control of the car central locking system allows for remote unlocking and locking without inserting the key into the lock. Its greatest advantage is the ability to conveniently unlock (open) and lock (close) the doors from a distance, regardless of day or night, without needing to locate the lock hole.
20
0
Share

How Many Cylinders Does the Encore Engine Have?

The Encore is equipped with a three-cylinder engine. Below is relevant information about the Encore:1. Introduction to the Encore: The Encore is a compact SUV under the Buick brand, and all models in this series use three-cylinder engines. The Encore is powered by two types of engines: one is a 1.0-liter turbocharged engine, and the other is a 1.3-liter turbocharged engine.2. Body Dimensions of the Encore: The Encore has a wheelbase of 2570mm, with length, width, and height measuring 4295mm, 1798mm, and 1607mm respectively.3. Encore's 1.0-liter Engine: The 1.0-liter turbocharged engine in the Encore delivers 125 horsepower and a maximum torque of 180 Nm. This engine reaches its maximum power at 5800 rpm and its maximum torque between 1350 and 4500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with a 6-speed automatic transmission.
1
3
Share

How Many Times Can You Schedule the Driving Test for Subject 3?

You can take the driving test for Subject 3 up to 5 times. Below are the relevant details about the subject test: 1. According to the latest "Regulations on the Application and Use of Motor Vehicle Driving Licenses" Article 37, each subject test can be taken once, and if failed, a retake is allowed once. If the retake is not attended or still results in failure, the current test session ends, and the applicant must reschedule the test. However, for Subject 2 and Subject 3, the rescheduling must be done after 10 days. 2. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skills test scores remain valid. During the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth scheduled test still results in failure, the scores of other previously passed subjects will be invalidated.
19
3
Share

What is the speed range of 3rd gear?

3rd gear has a speed range of 25-35 km/h. Below is a detailed introduction to gear speeds: 1. Gears: Start in 1st gear, shift to 2nd gear after driving a few meters, shift to 3rd gear when the speed reaches above 20 mph but below 35 mph, shift to 4th gear when the speed reaches above 35 mph but below 45 mph, and shift to 5th gear when the speed exceeds 45 mph. 2. Precautions: While shifting gears, the clutch and throttle must be coordinated properly. Press the clutch pedal all the way down, then release the throttle pedal, and quickly shift to the corresponding gear. After shifting, immediately release your hand from the gear lever to avoid prolonged contact, as this can easily damage the gear lever.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.