What is the difference between BMW 520 and 525?

1 Answers
McLilah
07/25/25 5:41am
The differences between the BMW 520 and 525 are: 1. Different maximum horsepower: BMW 520 is 184ps; BMW 525 is 218ps. 2. Different maximum power: BMW 520 is 135kw; BMW 525 is 160kw. 3. Different maximum torque: BMW 520 is 270nm; BMW 525 is 310nm. Additional information: Both the BMW 520 and 525 belong to the mid-to-large-sized car category, with body dimensions of: length 5055mm, width 1860mm, height 1491mm, and a wheelbase of 3108mm.
Was this review help?
2
4
Share
More Forum Discussions

Is a 1kg Car Fire Extinguisher Enough?

Yes. It is best to use a portable fire extinguisher for cars. Below are the specific details about fire extinguishers: 1. Introduction: A fire extinguisher is a portable firefighting tool. It contains chemicals to extinguish fires. Fire extinguishers are one of the common fire prevention facilities, stored in public places or areas prone to fires. Different types of fire extinguishers contain different components, designed specifically for different fire causes. Care must be taken during use to avoid adverse effects and hazards. 2. Main Categories: According to their mobility, they can be divided into portable and wheeled types; based on the power source of the extinguishing agent, they can be classified into gas cartridge type, stored pressure type, and chemical reaction type; according to the extinguishing agent filled, they can be further categorized into foam, dry powder, halon, carbon dioxide, water, etc.
9
4
Share

What does vehicle warning mean?

Warning protection is a preventive collision warning system that protects the owner by preventing driving fatigue. When there is a risk of collision or deviation from the road, it will provide intermittent light braking or warning sounds to alert the owner. Introduction to the warning protection system: The front warning protection system uses radar sensor data to calculate the likelihood of an accident occurring. Within the system's operable range, it can identify collision risks with vehicles or pedestrians. In such cases, the system warns the driver through light and sound signals, and may also use braking impacts. When necessary, partial or full braking may be initiated to reduce the collision speed and avoid potential impacts. With the basic version of the warning protection system, the front seat belts are additionally tightened in reverse as needed. Even after the adaptive cruise control system is turned off, the front warning protection system remains active.
3
5
Share

Why Does Carbon Monoxide Poisoning Occur When Using Air Conditioning in a Car?

Carbon monoxide poisoning from car air conditioning occurs because the tight sealing of car doors and windows makes it difficult for air inside and outside the car to circulate. When the car is stationary but the air conditioning is still running, the carbon monoxide produced by the engine can accumulate inside the car, leading to poisoning and loss of consciousness, and in severe cases, death. Below is an introduction to car air conditioning: 1. Introduction: The car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, designed to regulate the temperature and humidity inside the car, providing a comfortable environment for passengers. 2. Working Principle: When the compressor operates, it sucks in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy. The liquid refrigerant then flows through the throttle device, where its temperature and pressure decrease before entering the evaporator.
14
2
Share

Does Rain Affect the Car After Painting?

Yes, it does. It is best not to choose rainy days for vehicle painting because the paint surface does not dry thoroughly in humid weather. Even if it is dried through prolonged baking, such a paint surface is prone to gloss degradation over time. Therefore, repair shops generally try to choose dry or sunny weather for painting. Below are some precautions regarding car painting: 1. Avoid contact with dust: If the car has just been painted, be careful not to let the newly painted areas come into contact with water or dust. 2. Avoid driving in the rain: The newly applied paint is still delicate, and exposure to rain can leave marks that are unsightly and sometimes cannot be removed even by polishing. It is best to park the car in a garage at night.
12
4
Share

Does water accumulation under car floor mats have a significant impact on the vehicle?

Water accumulation under car floor mats has minimal impact on the vehicle and poses no harm. However, if left unaddressed for an extended period, it can damage the electrical components beneath the base, requiring professional treatment at a 4S shop. If water is found under the floor mats, start by removing the soaked carpets or mats and then clear out any remaining water inside the vehicle. There are several sealing rubber plugs at the bottom of the vehicle chassis; opening these plugs can help drain the accumulated water from the cabin. If the vehicle has floor coverings, note that these materials are highly absorbent. It's advisable to remove them and place them in a spacious area to facilitate evaporation. In cases of severe water ingress, or if a musty smell persists after drying the vehicle, it indicates that some sponge or fiber materials in the interior have become damp and moldy due to the water. In such instances, visit an auto repair shop to have the seats removed and the interior thoroughly cleaned.
6
1
Share

What does a faulty windshield wiper mean?

Wiper failure may be caused by a blown fuse; a faulty wiper switch; a burnt-out wiper motor; or a defective wiper interval relay. Here are some precautions for using wipers: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning it once a month can improve the wiper's performance. 2. Check the rubber: If the wiper makes unusual noises while operating, the rubber blade may be aging or cracked. If the wear is not severe, you can use sandpaper to smooth out rough spots on the surface. 3. Avoid sunlight: Park the car in a shady place out of direct sunlight, such as a garage. Summer is particularly harsh on cars. Wiper blades are rubber products and will age faster in the sun. 4. Refill fluid: Do not simply add water to the windshield washer fluid reservoir, as this is detrimental to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid promptly to be prepared for unexpected needs.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.