What is the difference between blue label and yellow label batteries?

2 Answers
KathrynFitz
07/29/25 2:22am
The difference between blue label and yellow label batteries lies in their warranty periods: blue label batteries come with a warranty of one and a half years, while yellow label batteries have a two-year warranty. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the vehicle's electrical equipment when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the generator's output is insufficient; 4. Mitigating voltage surges in the electrical system to protect the vehicle's electronic equipment; 5. Storing excess electricity generated by the alternator.
Was this review help?
17
0
Share
SpencerRose
08/12/25 6:21am
I've worked in the auto repair shop for many years and often get asked about the difference between blue-label and yellow-label car batteries. The blue-label is the standard version, designed for regular family cars with smaller capacity, lower cold cranking amps (CCA), and a more affordable price, but relatively shorter lifespan. The yellow-label, on the other hand, is the upgraded version tailored for vehicles with start-stop systems, featuring CCA above 800 amps, larger capacity, better resistance to frequent charge-discharge cycles, and optimized internal structure for about 20% longer service life. The key differences lie in performance and durability: using yellow-label in start-stop cars reduces the risk of failed starts and prevents engine stalling, while blue-label may degrade within two years. Always check your vehicle manual for specifications before choosing—mixing them up can accelerate battery failure. It's best to test voltage with a multimeter before replacement to ensure compatibility and smooth driving.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

How often must a motorcycle be started when left unused?

Motorcycles should be started approximately every 5 months when left unused. For long-term motorcycle storage, maintenance should focus on the following aspects: 1. Engine: During prolonged storage, engine oil will gradually settle in the oil pan, leaving components such as the cylinder head, piston, cylinder, and valve train exposed to air and susceptible to oxidation over time. Storage method: Start the motorcycle every half month to one month, let it idle until reaching operating temperature, then ride for 3 to 5 kilometers. 2. Carburetor and fuel tank: While gasoline will evaporate over time, certain residues remain in the carburetor, potentially clogging its passages completely with prolonged storage. Storage method: Drain all fuel from the carburetor through its drain hole.
1
0
Share

Why Does the Motorcycle Make a Zizi Sound When Accelerating?

The following are the reasons why a motorcycle makes a zizi sound when accelerating: 1. Air intake pipe perforation or air leakage: Many vehicles nowadays use engineering plastic for the air intake pipe. When the pipe ages, it is likely to develop air leaks, resulting in a zizi sound during acceleration. 2. Excessive or loose valve clearance: Valves can also wear out. When the wear reaches a certain level, the valve clearance becomes too large, causing a zizi sound as air passes through the valve. 3. Dirty engine oil: Engine oil provides lubrication, but if the oil is not changed for a long time, it can accumulate dirt, leading to insufficient lubrication and abnormal noises from the engine.
16
4
Share

Why do driving schools have students learn manual transmission?

Driving schools have students learn manual transmission because the C1 driver's license has a wider range of applications. The C1 license allows driving both automatic and manual transmission vehicles, whereas the C2 license only permits driving automatic transmission vehicles and excludes manual transmission. Therefore, most driving schools recommend learning C1 manual transmission. Additional information: The main differences between C1 and C2 driver's licenses are: 1. The C1 license covers a broader range of vehicle types (including C2, C3, and C4), allowing the operation of small and micro passenger cars, light and micro cargo vehicles, and light, small, and micro special-purpose vehicles; 2. The C2 license only permits driving automatic transmission vehicles with no more than 9 seats and a length not exceeding 6 meters.
4
1
Share

What is the standard for steering wheel free play?

Below is an introduction to the standard for steering wheel free play: 1. The maximum free play of a car steering wheel must not exceed 30 degrees: Specifically, this refers to the state where the steering wheel is in the middle (straight driving position). When turned left by 15 degrees, the steering gear drives the wheels to turn, and the same applies to the right side. The total for both sides is 30 degrees. 2. Exceeding this value affects steering sensitivity and vehicle stability: If there are safety hazards, the steering gear should be adjusted or replaced. According to national standards, for vehicles with an actual speed greater than or equal to 100 km/h, the free rotation angle on one side of the steering wheel must not exceed 10 degrees; for vehicles with speeds less than 100 km/h, the free rotation angle on one side must not exceed 15 degrees.
7
3
Share

What does BDC mean?

Bottom-Dead-Center (BDC) refers to the lowest point in an engine's piston stroke where the piston crown is closest to the crankshaft center. Below is relevant information: 1. Engine: An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. 2. Piston: The piston is a reciprocating component within the cylinder block of an automobile engine. The basic structure of a piston can be divided into the crown, head, and skirt. The piston crown forms the main part of the combustion chamber, and its shape relates to the selected combustion chamber type.
7
2
Share

What is the warranty period for car batteries?

Car batteries generally have a one-year warranty period. The warranty duration is calculated from the date of vehicle purchase. Additional information: Below are precautions for battery maintenance: 1. Avoid long-term outdoor parking: Refrain from leaving the car parked in open-air parking lots for extended periods. If long-term parking is necessary, the battery must be removed and taken away to prevent freezing damage. 2. Engine starting: Car engines are harder to start in winter. Each starting attempt should not exceed 5 seconds, with intervals of no less than 15 seconds between attempts. If the engine fails to start after multiple attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system. Avoid continuous starting attempts, as this may cause the battery to over-discharge and burn out. 3. Charging issues: Unused batteries will gradually self-discharge until they become unusable. Therefore, start the car periodically to recharge the battery. 4. Regularly inspect battery components and connections: Clean the battery terminals periodically and apply specialized grease to protect the wiring harness.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.