What is the difference between automatic D and automatic S?

1 Answers
LunaRose
07/29/25 4:19pm
The differences between automatic D and automatic S are: 1. The automatic control logic for gear shifting is different: D gear is oriented towards comfort and economy; S gear is performance-oriented. 2. The response speed varies: when shifting into S gear, if the accelerator is suddenly pressed while driving, S gear will react quickly; D gear will slightly delay until it confirms the driver's intent for rapid acceleration before upshifting. 3. Fuel consumption differs: when in S gear, the higher RPM leads to increased fuel injection, resulting in higher fuel consumption; in D gear, the vehicle runs smoothly with lower fuel consumption. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
Was this review help?
4
0
Share
More Forum Discussions

What Are the Pedals in a Car?

The pedals in a car are used to control the vehicle. A manual transmission car has three pedals: the clutch pedal, the brake pedal, and the accelerator pedal. An automatic transmission car only has two pedals: the brake pedal and the accelerator pedal. Clutch Pedal: The clutch pedal is the control device for the clutch assembly in a manual transmission car. Through proper operation by the driver, it engages and disengages the front and rear parts of the clutch, achieving the purposes of starting, shifting gears, and reversing. Brake Pedal: The brake pedal is primarily used to control the speed of the car and to bring it to a stop. Accelerator Pedal: The accelerator pedal is part of the car's fuel supply system and is used to control the engine's speed. When pressing or releasing the accelerator pedal, it is necessary to control the force, ensuring a gentle press and slow release. During driving, sudden acceleration should be avoided as much as possible.
8
1
Share

What kind of light is the headlamp?

The headlamp refers to the lighting device installed on both sides of the front of a car, used for illuminating the road during nighttime driving. There are two types: two-lamp system and four-lamp system. The illumination effect of headlamps directly affects nighttime driving operations and traffic safety. Therefore, traffic management departments worldwide generally stipulate the illumination standards for automotive headlamps by law to ensure safety during nighttime driving. Additional information is as follows: 1. Classification: The optical system of a headlamp is a combination of a bulb, reflector, and light distribution lens. Based on the structure of the headlamp's optical system, headlamps can be divided into three types: semi-enclosed, enclosed, and projection. 2. Structure: Automotive headlamps generally consist of three parts: the bulb, reflector, and light distribution lens (diffuser).
8
0
Share

How to Replace the Air Filter in a Mondeo?

The steps to replace the air filter in a Mondeo are: 1. Loosen the locking nut on the air filter box using a tool; 2. Open the cover to reveal the air filter; 3. Press the clips on both sides of the baffle with both hands to remove it, then take out the old air filter; 4. Install the new air filter with the white side facing up, and reattach the baffle. The function of the air filter is to filter dust particles from the air, providing clean air for the car's air conditioning system. Taking the 2020 Mondeo as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height. It has a wheelbase of 2850mm, a fuel tank capacity of 62.5 liters, a trunk capacity ranging from 516 to 986 liters, and a curb weight of 1592kg.
9
2
Share

Where is the fuse box located in the Volkswagen Lavida?

The fuse box of the Volkswagen Lavida is located inside the instrument panel cover on the left side of the driver's seat. The working principle of the fuse is that when the circuit current exceeds twice the rated current of the fuse, it will melt within seconds to protect the circuit. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and minimum ground clearance 190mm. The 2021 Volkswagen Lavida features a front suspension with a MacPherson independent suspension and a rear suspension with a torsion beam non-independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
9
1
Share

What are the reasons for the Teana stalling automatically after starting?

Teana stalling automatically after starting may be caused by the following reasons: Electrical circuit failure: It may be due to low-voltage power interruption during driving, causing the engine to stall. Solution: Mainly check the ignition and starter switches, as well as the fuse box. Low-voltage circuit short circuit: In this case, the engine stalls intermittently. Solution: Inspect the vehicle's low-voltage circuits. Throttle body failure: Excessive carbon buildup in the throttle body, idle speed control valve, intake manifold, intake valves, and combustion chamber can cause this issue. Carbon deposits make the intake pipe walls rough, creating vortices in these rough areas, which affect the intake efficiency and air-fuel mixture quality, leading to stalling. Solution: Replace the throttle body with a new one.
2
3
Share

How to reset the maintenance light on BYD S6?

The method to reset the maintenance light on BYD S6 is as follows: Turn the key to the ON position (do not start the engine), when the dashboard lights up, press the confirmation button on the right side of the multifunction steering wheel. A series of prompts will appear on the dashboard. When the maintenance reminder appears, enter the menu to see the maintenance cycle mileage and days, then select reset. The step-by-step operation method for resetting the BYD S6 maintenance light is: 1. First press the car start button to power on the vehicle. 2. Then check the dashboard, where the oil maintenance reminder will appear. 3. Press the SET button on the steering wheel. 4. Press the SEL button on the right side of the steering wheel. 5. Press the cancel button on the steering wheel. 6. Finally, the maintenance reminder on the dashboard will be reset.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.