What is the difference between Audi A6 S gear and D gear?

3 Answers
Johnny
07/28/25 11:12am
Here are the differences between Audi A6 S gear and D gear: 1. Responsiveness: After shifting into S gear, the upshift is delayed. During driving, when suddenly stepping on the accelerator, the S gear responds quickly, while the D gear requires a slight wait. 2. Fuel consumption: While pursuing speed advantages, the S gear also maximizes power output. Long-term use of the S gear, due to increased air intake, naturally results in higher fuel consumption compared to the D gear. However, the driving pleasure of the S gear cannot be experienced in D gear mode. 3. Power: When climbing a slope, if the gear is not switched to S gear, the car's engine may produce some abnormal noises. This occurs because the engine cannot provide sufficient power at low RPMs, so it is advisable to use S gear when going uphill.
Was this review help?
13
5
Share
AlinaMarie
08/11/25 4:24pm
I've been driving an Audi A6 for several years and deeply feel the difference between the S mode and D mode. D mode is the normal driving mode, suitable for daily commuting, with smooth gear shifts and gentle acceleration, making it fuel-efficient and worry-free on city roads. In contrast, S mode is the sport mode, which I use on mountain roads or for overtaking on highways—the car responds more aggressively, accelerates quickly with a light press on the throttle, and the delayed gear shifts make the engine sound louder, naturally consuming more fuel. For grocery runs and commuting, I always choose D mode for comfort and economy, but on weekend drives, I switch to S mode to experience that exhilarating push-back feeling. In short, switching between the two is simple—just press a button—and owners can flexibly choose based on road conditions.
Was this review help?
17
5
Share
Expand All
DelAdaline
09/28/25 5:20am
As an enthusiast of sporty driving, I absolutely adore the explosive power of the Audi A6 in S mode! Especially on the highway, shifting to S mode delays the gear shift points, the engine revs up quickly, and with a press of the accelerator, the car surges forward effortlessly, making overtaking a breeze and full of fun. In D mode, it's much more docile, with smooth gear shifts and lower fuel consumption, ideal for long-distance driving with fuel efficiency and quietness. My personal experience is to avoid frequent use of S mode on city roads as it increases fuel consumption, unless you encounter steep slopes or need quick acceleration. I often recommend friends to try S mode on open roads, but I don't recommend daily overuse to avoid engine damage and unnecessary expenses.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

Is the Roewe i5 Equipped with an Aisin CVT Transmission?

Roewe i5 is not equipped with an Aisin CVT transmission, but rather a CVT transmission independently developed by SAIC. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and to fix or change the gear ratio between the output and input shafts. The transmission consists of a gear transmission mechanism and a control mechanism, and can be categorized into stepped, continuously variable, and integrated types, with functions including enabling reverse driving, interrupting power transmission, and changing gear ratios. Taking the 2021 Roewe i5 1.5L Manual Platinum Edition as an example: it is a compact 4-door 5-seater sedan with dimensions of 4607mm in length, 1818mm in width, and 1489mm in height, a wheelbase of 2680mm, equipped with a 5-speed manual transmission, and a top speed of 185 kilometers per hour.
6
3
Share

What Causes the Turn Signal to Suddenly Flash Rapidly?

The reasons for a turn signal suddenly flashing rapidly are: 1. Damaged flasher relay; 2. Poor bulb contact; 3. Burned-out bulb filament; 4. Excessive bulb wattage. If the turn signal was recently replaced, it's likely that the bulb wattage doesn't match the vehicle's original flasher relay, leading to abnormal behavior. The solutions for a rapidly flashing turn signal are: 1. Check if the flasher relay is functioning properly by using a multimeter to measure the output line of the flasher relay. If there's an intermittent output change around 12v, it indicates normal operation. If there's no output or a constant 12v output, the flasher relay is damaged and needs replacement; 2. Replace the bulb filament.
7
4
Share

How to reset the maintenance light on Changhe Q7?

The method to reset the maintenance light on Changhe Q7 is: 1. Turn on the ignition switch and hold down the "Reset Button" without releasing it; 2. Turn off the ignition switch while keeping the "Reset Button" pressed until the clock and mileage on the dashboard completely disappear, then release the button; 3. Press and hold the "Reset Button" again, turn on the ignition switch, at this time the maintenance reminder on the dashboard will be flashing; 4. Continue holding the "Reset Button" until the maintenance reminder stops flashing, then release the button. Taking the 2018 Changhe Q7 1.5T Manual Luxury 7-seater as an example: It is a compact 5-door 7-seat SUV with dimensions of 4655mm in length, 1855mm in width, and 1720mm in height, a wheelbase of 2670mm, and equipped with a 6-speed manual transmission.
15
4
Share

Can a Dash Cam Record When Turned Off?

A dash cam cannot record when turned off. Below is a detailed introduction to the working status and functions of a dash cam: Working Status of a Dash Cam: Generally, when the car is turned off, the power supply to the dash cam stops, and the dash cam remains off when the car is not in use. Functions of a Dash Cam: A dash cam can record video images and audio of the entire driving process, providing evidence in case of traffic accidents. It helps document accidents or prevent fraudulent claims. With a dash cam, you can present evidence to better determine liability in an accident, safeguarding the driver's legal rights. The dash cam can clearly replay the scene 20 seconds before and after an accident, effectively preventing the fabrication of fake accident scenes for insurance fraud.
17
3
Share

What is the reason for no response when turning the key to start a Volkswagen Polo?

The reasons for no response when turning the key to start a Volkswagen Polo are: 1. Incorrect gear position: The P or N gear is the correct position for starting an automatic transmission vehicle. Placing the gear in R or other positions may cause safety hazards; 2. Circuit failure: including blown fuses, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detachment of the central ignition wire, leakage in the distributor head, or damaged spark plugs; 3. Activation of the steering wheel's automatic locking function. Taking the Polo 2021 Plus 1.5L Manual Panorama Enjoyment Edition as an example: It is a compact 5-door, 5-seat hatchback with dimensions of 4053mm in length, 1740mm in width, and 1449mm in height, a wheelbase of 2564mm, equipped with a 5-speed manual transmission, and a top speed of 190 kilometers per hour.
19
2
Share

How Long Can You Drive with a Noisy CV Joint?

Noise from the CV joint indicates that it has already worn out, and it is recommended to repair it as soon as possible. If not repaired, the remaining drivable distance and time can vary significantly—ranging from up to a year or several thousand kilometers to as little as a few days or a few dozen kilometers. This depends on factors such as the extent of wear on the CV joint, road conditions, and driving habits. For front-wheel-drive vehicles, the CV joint plays a crucial role. The front wheels not only need to rotate but also steer. During high-speed driving, the wheels must turn while rotating, requiring a flexible connection between the drive shaft and the wheels. The CV joint serves this purpose, enabling 360-degree rotation through its internal design.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.