What is the difference between Audi A6 Legend Black and Star Black?

1 Answers
JaceRose
07/29/25 1:54pm
The differences between Audi A6 Legend Black and Star Black are: 1. Gloss level: Legend Black is matte black; Star Black is glossy black. 2. Paint type: Legend Black uses standard paint; Star Black uses pearl-effect paint. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large sedan category with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73l, and curb weight 1800kg. The 2020 Audi A6 features a five-link independent suspension for both front and rear, and is equipped with a 2.0L turbocharged engine delivering maximum power of 190PS (140kW) and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
5
0
Share
More Forum Discussions

How many turns is 90 degrees on the steering wheel?

Turning the steering wheel 90 degrees is a quarter turn. One full turn of the steering wheel is 360°, and a quarter turn is 90°. You can think of the steering wheel as a clock, with the correct hand positions being left hand at the 9 o'clock position and right hand at the 3 o'clock position. To turn 90°, you would make a full turn and then an additional quarter turn. Below are common steering wheel issues: 1. Steering wheel lock: When the steering wheel won't turn and the key won't twist, gently turn the key with your right hand while lightly turning the steering wheel with your left hand to unlock it. 2. Scratched steering wheel: First, remove any debris and rust. Apply paint in thin layers, allowing each layer to dry before applying the next until it matches the surrounding paint. Wait a day after repair before washing or repainting. 3. Steering wheel vibration: If the steering wheel vibrates at speeds between 80-90 km/h but stabilizes above 90 km/h, it's often due to tire deformation or drivetrain issues. Check the front wheel alignment and toe-in, adjusting if necessary. Lift the front axle to test wheel balance and check for excessive tire deformation, replacing if needed.
1
4
Share

What Are the Models of Manual Transmission Fluid?

Manual transmission fluid, commonly referred to as gear oil, comes in six models: GL-1, GL-2, GL-3, GL-4, GL-5, and GL-6. Here is some relevant information about manual transmission fluid: 1. Model Introduction: Manual transmission fluid, also known as gear oil, includes five grades: GL-1 to GL-5. GL-1 to GL-3 have higher performance requirements and are used for most lubrication purposes. GL-4 is used for lubrication under conditions of high speed with low torque or low speed with high torque. GL-5 offers the best performance and is used for transmission lubrication under severe operating conditions with high impact loads. 2. Selection of Transmission Fluid: The selection of automotive gear oil includes the following: general-purpose gear oil (GL-3), suitable for spiral bevel gear differentials, transmissions, and steering gears under mild operating conditions, such as the rear axle and transmission of the Jiefang CA1091 vehicle. The viscosity grades (SAE) correspond to 90, 80W/90, and 85W/90, suitable for year-round use in regions with temperatures ranging from -10°C to 20°C.
18
3
Share

Why Do I Need to Provide My Insurance Policy When the Other Driver Is Fully at Fault?

Because the traffic police need to verify that the vehicle's compulsory insurance was valid at the time of the incident for record-keeping purposes. According to Article 60 of the "Road Traffic Accident Handling Procedures," the traffic management department of the public security authority shall determine the liability of the parties involved based on the role of their actions in causing the accident and the severity of their fault. Below are the contents typically included in commercial auto insurance: 1. Vehicle Damage Insurance: Covers losses due to natural disasters and accidents, recommended for new drivers. 2. Third-Party Liability Insurance: Compensates for third-party personal injury or death caused by the policyholder, mandatory for protection of both oneself and others. 3. No-Deductible Insurance: An add-on that transfers the policyholder's liability to the insurance company, reducing personal losses. It is advisable to purchase this if you have both Vehicle Damage Insurance and Third-Party Liability Insurance. 4. Theft and Robbery Insurance: Covers damages caused by theft, robbery, or forcible seizure of the vehicle, recommended for new car owners without garages. 5. Passenger Liability Insurance: Compensates the driver and passengers for losses due to accidents, usually charged per seat. Recommended for new drivers or family vehicles.
1
0
Share

Can Car Bumpers Be Repainted?

If the scratches on the vehicle's bumper are large and noticeable, repainting can be performed. The drying time for repainting a car bumper varies depending on the painting environment and the type of paint used. If the repair shop or 4S store has a professional paint booth, the paint can dry faster, allowing the car to be driven away the same afternoon if painted in the morning. More relevant information is as follows: 1. Bumper Scratch Repair: For minor scratches on the car bumper that can be resolved through polishing, car owners can purchase a touch-up paint pen for repairs. Touch-up paint pens usually come with instructions. After using the touch-up paint pen, applying polishing wax can make the repair nearly invisible to the naked eye. 2. Bumper Dent Repair: When the car bumper is subjected to significant force, dents may occur. While some online sources suggest using hot water for repair, repair shops typically use a heat gun. The principle is similar—plastic becomes highly elastic when heated, allowing the deformed bumper to return to its original shape under external force, provided the bumper is made of plastic. 3. Bumper Crack Repair: If the car bumper is cracked, plastic welding rods can be used to weld the cracked area before smoothing and repairing it. For severe cracks, it is recommended to replace the bumper entirely.
20
3
Share

What Causes Idle Vibration After Cleaning the Throttle Body?

After cleaning the throttle body, the reason for idle vibration is the lack of data matching. It is necessary to reset the computer or disconnect the negative terminal of the battery to allow the computer to reset the throttle body. Here is some related information about cleaning the throttle body: 1. Precautions: (1) It should be disassembled for cleaning. (2) Correct some misconceptions about throttle body cleaning. (3) The main cause of throttle body dirt comes from oil vapor, followed by airborne particles and moisture. This means that when using a qualified air filter and removing the crankcase ventilation tube, the throttle body will get dirty much more slowly. 2. Throttle Body Introduction: It is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to produce work. It connects to the air filter at the top and the engine block at the bottom, and is referred to as the throat of the car engine. The throttle body is one of the most important components in today's electronic fuel injection engine systems. Its upper part connects to the air filter element, and the lower part connects to the engine block, making it the throat of the car engine. Definition of the throttle.
3
3
Share

Under what circumstances will points be deducted for not having a passenger in the front seat?

Points will be deducted for not having a passenger in the front seat under the following circumstances: driving on highways during the probationary period, traveling in high-occupancy vehicle (HOV) lanes, or having a pet in the front seat. The details are as follows: 1. Driving on highways during the probationary period: Newly licensed drivers have a probationary period. If they wish to drive on highways during this period, they must be accompanied by a person holding a valid driver's license for the same or a higher vehicle class with at least three years of driving experience. If there is no accompanying passenger in the front seat to provide guidance, the driver may be penalized by traffic police. 2. Traveling in HOV lanes: These lanes are designated for vehicles carrying a required number of passengers. Violators will be penalized according to relevant regulations. The purpose of these lanes is to encourage carpooling and reduce the number of vehicles on the road. If a single driver is caught using an HOV lane, they will face penalties. 3. Having a pet in the front seat: Some drivers place their pets in the front seat while driving, which is a clear violation. Pets in the front seat can easily distract the driver, especially if they move around and accidentally press buttons, increasing the risk of accidents.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.