What is the difference between AT tires and MT tires?

Where is the camshaft sensor located?

The camshaft signal wheel is generally installed at the front end of the camshaft, and the camshaft phase sensor must face the signal wheel to collect signals. Therefore, the camshaft phase sensor is usually installed at the front end of the camshaft cover, facing the front end of the intake and exhaust camshafts. Additional information is as follows: 1. Prominent advantages of magnetic induction sensors: The prominent advantage of magnetic induction sensors is that they do not require an external power supply. The permanent magnet serves to convert mechanical energy into electrical energy, and its magnetic energy is not lost. When the engine speed changes, the speed of the rotor teeth rotation will change, and the rate of magnetic flux change in the iron core will also change accordingly. The higher the speed, the greater the rate of magnetic flux change, and the higher the induced electromotive force in the sensing coil. 2. Operation of the crankshaft position sensor: When the crankshaft position sensor rotates with the crankshaft, according to the working principle of the magnetic induction sensor, each time the signal rotor passes a tooth, the sensing coil generates a periodic alternating electromotive force (i.e., the electromotive force reaches a maximum and a minimum once), and the coil correspondingly outputs an alternating voltage signal.

12

2

Share

What is the order of the pedals in a car?

From left to right, the three pedals are the clutch, brake, and accelerator. Below is extended information about car pedals: 1. Clutch: An essential component of the car's powertrain, it is responsible for disconnecting and connecting the powertrain to the engine. When driving on urban roads or complex sections, the clutch becomes one of the most frequently used components. The proper use of the clutch directly reflects the driver's skill level and the level of vehicle protection. It is important to use the clutch correctly, understand its principle, and utilize it to solve problems in special situations. 2. Brake: A mechanical braking device that slows down the vehicle, also known as a decelerator. The accelerator pedal, also called the throttle pedal, is part of the car's fuel supply system. By controlling the amount of pedal depression, it regulates the engine's air intake, thereby controlling the engine's speed. 3. Note: When driving, press the clutch all the way down before shifting gears, otherwise it will accelerate the wear of the clutch plate. The brake pedal is higher than the accelerator pedal, a design intended to prevent accidents caused by mistaken pedal use. Avoid slamming on the brakes in non-emergency situations; instead, gently press the brake to gradually reduce speed, ensuring a more comfortable ride for passengers. When accelerating, avoid stomping on the accelerator, as this not only wastes fuel but also provides poor acceleration. Instead, press the accelerator slowly and steadily.

12

4

Share

What does the exclamation mark with P mean?

The dashboard displaying an exclamation mark with P indicates a fault in the electronic parking brake system. A circle with P and an exclamation mark inside means there is a system fault, and the warning signal light is on. Depending on the vehicle model and brand, the meaning of the indicator lights on the dashboard may vary. For example, some cars show a red circle with an exclamation mark when the handbrake is not engaged, while others display a circle with a P. The specific meaning should be determined according to the vehicle's user manual. Other common warning lights with exclamation marks include: 1. A triangle with an exclamation mark in the middle: This is a general fault indicator light. This light indicates that certain components of the car have issues, such as overheating of the dry dual-clutch transmission clutch, parking sensor failure, engine oil pressure sensor failure, external light failure, etc. 2. A yellow symbol with an exclamation mark inside a shape resembling a tire with a horizontal line at the bottom and open at the top: This is the tire pressure monitoring warning light. When this light comes on, it indicates that the pressure in one of the car's tires is either too low or too high.

13

5

Share

When will China implement the National VI emission standards nationwide?

China will implement the National VI emission standards nationwide in 2023. Here are the relevant details: 1. Timeline: The implementation of the National VI standards will be divided into two phases: "National VI a" and "National VI b", with corresponding effective dates of July 1, 2020, and July 1, 2023, respectively. In fact, National VI a is only a transitional phase from National V to National VI, and the full implementation of the National VI emission standards will take place in 2023. 2. Notes: Some models listed as compliant with the National VI emission standards are already on the market, newly launched, or about to be launched. Among them, the already available models are those currently on sale in the market that meet National VI standards, while newly launched models may not yet be widely available for purchase. Upcoming models refer to those that will soon be released in compliance with the emission standards. The implementation of National VI standards for heavy-duty trucks and medium/light-duty trucks is progressing in an orderly manner, with annual penetration rates gradually increasing. According to policy requirements, relevant models will fully transition to National VI B by 2023.

19

5

Share

Do 2012 vehicles require on-site annual inspection under the new regulations?

According to the new annual inspection regulations, vehicles that are 12 years old still require an annual inspection before their 2020 inspection validity period expires. The new policy was implemented starting November 20, 2020. This means that only vehicles inspected after November 20, 2020, will receive a 2-year valid motor vehicle inspection certificate and enjoy the policy of biennial inspections for vehicles within 10 years. Below are the relevant details of the annual inspection: 1. Validity Period: The new regulations include 7- to 9-seater non-commercial small and mini passenger vehicles (excluding vans) within the exemption scope for vehicles under 6 years old. For non-commercial small and mini passenger vehicles (excluding vans) older than 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. 2. Regulations: Article 15 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicle safety technical inspections shall be conducted by motor vehicle safety technical inspection institutions. These institutions must inspect vehicles in accordance with national motor vehicle safety technical inspection standards and bear legal responsibility for the inspection results. 3. Technical Aspects: Quality and technical supervision departments are responsible for implementing metrological certification management for motor vehicle safety technical inspection institutions, calibrating motor vehicle safety technical inspection equipment, and supervising compliance with national motor vehicle safety technical inspection standards.

11

3

Share

What is the reason for the buzzing sound after replacing the bearing on the Sagitar?

The buzzing sound after replacing the bearing on the Sagitar could be due to a problem with the new bearing or an issue during the installation process, requiring further repair. Below are the relevant details about the Sagitar: 1. The Sagitar is a compact car under the Volkswagen brand, with dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. 2. The new Sagitar is equipped with either a 1.2-liter turbocharged engine or a 1.4-liter turbocharged engine. (1) The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 175 Nm. This engine reaches its maximum power at 5000 to 6000 rpm and its maximum torque at 1500 to 4500 rpm. It is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. (2) The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power at 5000 to 6000 rpm and its maximum torque at 1750 to 3000 rpm. It is matched with a 7-speed dual-clutch transmission.

4

1

Share

What is the difference between AT tires and MT tires?

Where is the camshaft sensor located?

What is the order of the pedals in a car?

What does the exclamation mark with P mean?

When will China implement the National VI emission standards nationwide?

Do 2012 vehicles require on-site annual inspection under the new regulations?

What is the reason for the buzzing sound after replacing the bearing on the Sagitar?

Differences Between Buying a Used Car and a New Car?

What is the difference between left-side traffic and right-side traffic signs?

Can Changing Spark Plugs Save Fuel?

Is It Normal for Dry Dual-Clutch to Shudder During Start-Up?