What is the difference between a straight push master cylinder and a side push master cylinder?

Do traffic police check vehicles on Saturdays and Sundays?

Traffic police also conduct vehicle checks on Saturdays and Sundays. Generally, the traffic police brigade works on weekdays, from Monday to Friday, with working hours from 8:30 AM to 12:00 PM and 2:30 PM to 5:30 PM on weekdays. On Saturdays and Sundays, only on-duty personnel are working, and the business departments are off. The traffic police brigade, like the vehicle management office, belongs to the traffic police brigade headquarters. It consists of the traffic police command system, publicity department, legal department, technology department, logistics management office, political department, discipline department, supervision department, road duty brigade, highway brigade, traffic violation handling, and accident handling units, among others. Since the traffic police brigade is also part of the public service unit, the traffic violation handling and accident resolution departments, which are relatively busy, are off on weekends. Therefore, traffic violations cannot be resolved on weekends. However, the duty brigade and road brigade continue to work on Saturdays and Sundays to maintain traffic order.

12

4

Share

Where is the electronic handbrake of the Sylphy located?

The electronic handbrake of the Sylphy is located on the lower right side of the driver's compartment, marked by a circle with the letter 'P' inside. Working principle of the electronic handbrake: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the traditional mechanical handbrake lever to an electronic button. Traditional handbrake: With a traditional handbrake, starting on a slope requires the driver to manually release the handbrake or skillfully coordinate the throttle and clutch for a smooth start. In contrast, the AUTO-HOLD automatic parking function uses a slope sensor to provide precise parking force through the controller. During startup, the parking control unit calculates information provided by sensors such as the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the rolling resistance, the parking brake is automatically released, allowing the car to start smoothly.

13

5

Share

Where is the cabin air filter located in the Peugeot 301?

The cabin air filter in the Peugeot 301 is located inside the glove compartment under the front passenger seat. After removing the screws and taking off the small cover plate, you can then remove the larger white screws to take off the long strip cover plate to access it. If replacement is needed, you can visit a repair shop for assistance. The cabin air filter, commonly known as the pollen filter, serves to filter the air entering the vehicle interior from the outside, improving air cleanliness by removing impurities, tiny particles, pollen, bacteria, industrial exhaust, dust, and other contaminants. The Dongfeng Peugeot 301 is a compact sedan with a 4-door, 5-seat configuration. Its dimensions are 4442mm in length, 1748mm in width, and 1476mm in height, with a wheelbase of 2652mm.

11

4

Share

Why is the steering wheel of the new Sylphy heavy?

New Sylphy's heavy steering wheel may be caused by low tire pressure or steering gear failure. The following are the specific reasons for a heavy steering wheel: Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. Toe-in problem: Toe-in can also affect the car's steering. The concept of toe-in is quite complex, but simply put, it helps the steering wheels automatically return to the center, ensuring the car can drive straight stably. Therefore, issues in this aspect can also cause a heavy steering wheel. Steering gear or power steering pump failure: The steering gear and power steering pump also affect the car's steering. Any failure in these two critical components can make steering difficult. Issues such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked.

17

1

Share

What is the working principle of the brake warning line?

The working principle of the brake pad warning line is that when the brake pads wear down to the preset "limit" after a certain period of use, the natural circuit is "broken" by the wear. This breakage is then detected by the ECU, which triggers the warning light. The brake pad warning alerts the car owner to replace the brake pads in a timely manner. Additional information: Brake warning line: The brake warning line is generally composed of a steel plate, a bonded heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the quality of the temperature distribution during coating. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. The friction block consists of friction materials and adhesives, which are pressed against the brake disc or drum during braking to generate friction, thereby achieving the purpose of decelerating and stopping the vehicle.

19

0

Share

Why is Volvo's first maintenance at 10,000 kilometers?

Different models have different maintenance cycles. Volvo's first maintenance is at 10,000 kilometers because European vehicle maintenance cycles are generally longer, not just 10,000 kilometers, but even up to 20,000 kilometers for the first maintenance. However, this is the ideal maintenance cycle. If the vehicle is frequently driven in harsh conditions, such as urban traffic congestion or short-distance driving, it is recommended to appropriately shorten the maintenance cycle, for example, performing maintenance every 7,500 kilometers would be more appropriate. Below is more information about the first car maintenance: 1. Maintenance content: The first car maintenance is divided into minor maintenance and major maintenance. Minor maintenance includes changing the engine oil and oil filter, while major maintenance includes engine oil, oil filter, air filter, and fuel filter. 2. Maintenance cycle: The first maintenance for a new car is generally limited to within 3 months or 5,000 kilometers, whichever comes first—either time or mileage.

19

1

Share

What is the difference between a straight push master cylinder and a side push master cylinder?

Do traffic police check vehicles on Saturdays and Sundays?

Where is the electronic handbrake of the Sylphy located?

Where is the cabin air filter located in the Peugeot 301?

Why is the steering wheel of the new Sylphy heavy?

What is the working principle of the brake warning line?

Why is Volvo's first maintenance at 10,000 kilometers?

Can the time for Subject 4 exceed three years?

Can Replacing with Xenon Bulbs Pass the Annual Inspection?

What is the fuel consumption of the Sylphy?

What are the precautions for driving into a tunnel?