What is the difference between a new car and a stock car?

1 Answers
MackenzieRose
07/29/25 7:37pm
Difference is that stock cars have been parked for a longer time than new cars, and their parts may age, such as: tires, batteries, various oils, various rubber products, painted surfaces, and related drainage holes, etc. Here is the relevant introduction: 1. Definition of stock cars: Stock cars are just a term in the automotive sales industry, referring to vehicles that have not been sold for a long time after leaving the factory and have been in stock for a long time. There are no relevant national regulations specifying how many months a car must be to be considered a stock car, but the industry generally considers cars that have been out of the factory for more than three months or more than half a year as stock cars. For imported cars, due to the considerable time spent on transportation, customs declaration, and customs clearance, the time limit for imported cars will be relaxed, generally more than half a year or a year can be called stock cars. 2. Possible problems with stock cars: (1) After leaving the factory, various oils, electronic components, batteries, rubber seals, and tires, etc., have not been periodically inspected and maintained after long-term parking, and are prone to moisture aging and other erosion; (2) Only a very few dealers will implement periodic inspection and maintenance measures, directly exposing the cars to the sun, wind, and rain; (3) For stock cars that have been parked for too long, if there is no perfect warehouse management, the aging degree of electronic components and rubber products is basically undetectable, and professional testing equipment is required. Many cars that have been in stock for too long also have problems of lack of oil and electricity.
Was this review help?
7
1
Share
More Forum Discussions

How to Reset the Maintenance Light on a Car?

To reset the car maintenance light, follow these steps: First, turn off the engine and remove the key. Then, press and hold the right button below the dashboard while inserting the key and turning it to the 'on' position. Once the key is turned to the 'on' position, release the right button. At this point, a small wrench icon will appear. After the wrench icon appears, press the left button below the dashboard once, and the wrench icon will disappear. Additional notes: 1. The purpose of the maintenance light is to remind the owner to schedule maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. 2. The quickest and most accurate method to reset the maintenance reminder light is by using a diagnostic tool. Since most car owners do not have access to such equipment, it is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for the reset.
14
0
Share

What to Do When the Car Steering Wheel Locks?

When you find the car steering wheel locked, it is easy to unlock it by following the correct steps. First, insert the key and press the brake, then turn the steering wheel left and right. Although the steering wheel is in a locked state at this time, it can still be slightly turned a little bit. While turning the steering wheel, turn the key to complete the steering wheel unlocking process. Here is some related information about the car's auto-lock function: 1. The auto-lock function has another name, called a speed detector. When a certain speed is reached, the auto-lock function will automatically activate to prevent the doors from opening accidentally. This design can effectively ensure the safety of the driver and passengers and reduce the occurrence of accidents. 2. When the speed reaches a certain set value, the vehicle speed will automatically decrease. Generally, this speed is set between 10-20 km/h. Some vehicles have other handling methods. When the gear is engaged with the transmission, the lock button will also automatically activate to prevent the doors from opening accidentally.
14
2
Share

Can You Turn on the Hazard Lights in Heavy Rain?

You should not turn on the hazard lights in heavy rain. Here is some relevant information about hazard lights: 1. Definition and Usage: Hazard lights are also known as emergency warning lights. Commonly referred to as 'hazard lights,' the technical term is emergency warning lights. The hazard light button is located in the center of the dashboard, with a red triangle symbol on it. Pressing this button will cause all four turn signals to flash simultaneously. 2. Usage Scenarios: Hazard lights are the highest-level warning lights, which is why many people instinctively turn them on in heavy fog. However, this practice is prohibited in some countries because it can make it difficult for following vehicles to determine the direction the leading vehicle intends to go. It is particularly important to note that you should never change lanes with hazard lights on. Avoid changing lanes in foggy conditions whenever possible. If lane changing is necessary, turn off the hazard lights and use the turn signals instead.
7
5
Share

What kind of transmission does the Axela use?

Axela adopts the Skyactiv-Drive 6-speed automatic transmission, which is developed by Mazda itself, with some components co-developed with Aisin. It is part of the "Skyactiv" technology package. Below is additional information about the Axela: 1. The Axela is equipped with two naturally aspirated engines featuring Skyactiv technology: a 1.5L and a 2.0L, with maximum power outputs of 117 horsepower and 158 horsepower, and peak torques of 148 N·m and 202 N·m, respectively. The transmission system is paired with either a 6-speed manual or a 6-speed automatic transmission. 2. In terms of suspension, the new model features a front MacPherson strut independent suspension and a rear multi-link independent suspension combination. The new Axela is positioned as a sporty compact sedan from a joint venture brand. In the current joint venture compact car market, models like the Dongfeng Honda Civic, Changan Ford Focus, and SAIC-GM Chevrolet Cruze, which also emphasize sporty styling, will be the main competitors of the Axela.
3
1
Share

Can You Charge a Car in the Rain?

Yes, but the plug must not be exposed to rain. Here is relevant information about electric vehicle charging: 1. Precautions: Water in the charger can easily burn out circuit boards and control components, and human proximity or contact may cause irreversible harm. Additionally, water ingress in the charger can lead to electronic component failures. If the charger remains in working condition, it can overcharge the battery, causing damage. 2. Charging Instructions: Charge according to the battery capacity, typically taking 8-10 hours to fully charge. Disconnect the power promptly after full charge. If the power remains on for too long, the electronic components inside the charger may overheat, potentially causing a short circuit and sparks, which could lead to a fire. Nighttime and early morning are the most prone times for fires, so it's best to charge during the day under supervision. Once the indicator light on the charger turns green, unplug it as soon as possible. The charging environment should be well-ventilated, with an optimal ambient temperature of 25°C. Avoid exposing the vehicle to direct sunlight or rain during storage.
16
3
Share

What Causes No Cooling or Airflow in Car AC at High Speeds?

The reasons why a car's air conditioning does not cool or blow air at high speeds are as follows: Reason 1: Too much dirt and dust on the condenser, leading to poor cooling performance. Reason 2: Too much debris in the air filter, affecting the blower's air intake and reducing airflow. Reason 3: Excessive dirt on the evaporator, significantly impacting both air intake and cooling, thereby severely affecting the AC's cooling performance. Reason 4: Ice formation on the evaporator surface, severely obstructing the AC's airflow. Below is an introduction to car air conditioning: Introduction 1: The heating principle of car air conditioning is simple. When the heating function is turned on, high-temperature coolant from the engine flows through the heater core, and the air blown by the blower passes through the heater core, allowing warm air to be blown out from the AC vents. Introduction 2: The cooling principle of car air conditioning is also straightforward. When the AC button is pressed, the AC compressor clutch engages, allowing the engine to drive the compressor. The compressor continuously compresses the refrigerant and sends it to the evaporator. Introduction 3: When the refrigerant expands in the evaporator, it absorbs heat, cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing cold air to be blown out from the AC vents.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.