What is the difference between a driving permit and a driver's license?

3 Answers
EmmaLee
07/29/25 8:56am
The differences between a driving permit and a driver's license are introduced as follows: 1. Appearance and content differences: The full name of the "Driver's License" is the "Motor Vehicle Driver's License," also known as a "driver's license." It is a license required by law for motor vehicle drivers to apply for, proving that the holder is qualified to drive corresponding vehicle types; The "Driving Permit" is a necessary document obtained by citizens through relevant examinations to drive motor vehicles. Depending on the type of vehicle driven, the required type of "Driving Permit" also varies. 2. Source differences: The "Driver's License" is issued by the public security traffic management department as a document for driving motor vehicles; The "Driving Permit" is a qualification document for driving commercial vehicles issued by the transportation department, requiring the driver to already hold a driver's license when applying for the "Driving Permit."
Was this review help?
5
1
Share
Jesse
08/12/25 7:37am
Speaking of driver's license and vocational driving permit, I've been driving for ten years and often encounter novices confusing these two documents on the road. The driver's license is what we obtain through testing, proving you have basic driving skills - it's what you use for daily private car commuting. However, the vocational driving permit is different; it's designed for professional drivers like taxi, bus or truck drivers, requiring additional training and exams to assess your knowledge of passenger safety or cargo transportation. The key differences are: driver's license is general authorization while vocational permit is professional certification; without driver's license you can't drive, without vocational permit you can't engage in transport operations. My friend got heavily fined by traffic police for driving trucks without obtaining the vocational permit first. Crucial reminder: some think driver's license can substitute, but that could cost you your job. Before hitting the road, always verify your document type to avoid safety incidents caused by mistakes. Driver's license renewal is simpler, whereas vocational permits require periodic retraining to maintain professional standards.
Was this review help?
12
5
Share
Expand All
LaJulianna
10/06/25 2:41am
Hey, as a young car enthusiast who loves researching, I've looked up a lot of information. The driver's license is the common one we all know—pass the written and road tests, and you're good to go, making it super convenient for personal car trips. What about the vocational driving permit? It's mainly for professional transport, like driving ride-hailing cars or trucks, where you're required to learn emergency handling and safety protocols—not everyone needs it. The key difference: one is the threshold for personal travel, the other is an endorsement for professional drivers; the driver's license covers driving skills, while the vocational permit covers operational responsibilities. I have a buddy who got his truck impounded for lacking a vocational permit—fined and even affected his credit. Applying for a vocational permit takes extra months of training and additional tests, way more complicated than getting a driver's license. Also, for certain vehicle types like hazardous material transporters, a driver's license alone isn’t enough—you must have the vocational permit. Don’t mix them up when driving; understanding the requirements can save you big trouble. Regularly checking your document type on the traffic authority’s website is also super useful.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What are the tire specifications for the Audi A4?

The domestic version of the Audi A4 comes with two tire specifications: 225/50r17 and 245/40r18, while the imported version is equipped with 245/45r18 tires. Below is an introduction to the Audi A4: 1. In terms of powertrain, the Audi A4 comes standard with Audi's patented Quattro all-wheel-drive system, providing the vehicle with double the traction. 2. During steering or braking, the system automatically, accurately, and timely distributes the ground force to each wheel. Additional information: 1. The FAW Audi A4 is sold in three displacement options: 1.8, 2.4, and 3.0. 2. Among them, the 1.8T is available in four variants, the 2.4 displacement in three variants, and the 3.0 displacement in only one variant.
16
2
Share

How often should the gear oil of a scooter be changed?

The replacement cycle for scooter gear oil is between 6000 to 10000 kilometers. Unlike engine oil, gear oil does not require frequent changes. Here are the daily maintenance methods for motorcycles: 1. During the break-in period, keep the motorcycle idle speed at 100 RPM. 2. Match the motorcycle gear with the corresponding speed. 3. When you need to brake due to an upcoming situation, release the throttle, step on the rear brake with your right foot, and gently apply the front brake with your right hand. 4. Regularly inspect the spark plugs. 5. When installing a new spark plug, hand-tighten it until it doesn't move, then use a spark plug socket to tighten it an additional quarter to half a turn. 6. Regularly lubricate the chain.
19
4
Share

How much horsepower can the Audi A4L be tuned to?

If we're talking about ECU tuning, it generally can increase the power by about 10%. The original 190PS horsepower of the Audi A4L can be tuned up to 250PS. Introduction to horsepower: Horsepower is a unit of power, with the international unit of power being the watt. People often see horsepower used in car power ratings, for example, a certain car's maximum power is 130 horsepower. When maximum power occurs: For family cars, the perfect engine should have maximum torque at very low RPMs, while maximum power should appear at relatively higher RPMs.
7
4
Share

Where is the wiper fuse located in a BMW 5 Series?

BMW 5 Series fuse box is located inside the glove compartment on the passenger side. After opening the glove compartment, remove the interior trim panel to access the fuse box. There is also another fuse box located on the side of the trunk. Steps to replace a fuse: Locate the corresponding position of the fuse box, then carefully pry open the cover using a screwdriver or other tools. On the inner side of the cover, you can find the corresponding component fuse based on the information provided. When replacing with a new fuse, ensure that parameters such as current match those of the original fuse. Important notes regarding fuses: Installing a fuse with a current rating higher than specified can easily cause component overload and damage. Never attempt to repair a fuse that has already been damaged.
3
1
Share

Where is the key insertion point for Volkswagen cars?

Volkswagen's door keyhole is located under the lock cover at the end of the door handle. To access the keyhole, you need to open the lock cover at the end of the door handle. When the remote key fails: First, pry open the lock cover, then insert the mechanical key to unlock the door. This allows the owner to open the door even without the smart key. When reinstalling the lock cover, be sure to pull the door handle outward before installation. Reason for hiding the keyhole: Designers concealed the keyhole for aesthetic purposes. This design is actually more practical than an exposed keyhole, as it prevents dirt from entering the keyhole while maintaining a clean and stylish appearance.
17
1
Share

What is the proportion of high-strength steel in Geely Emgrand?

Emgrand adopts a cage-type safety body with over 59% high-strength steel content. While enhancing overall strength to ensure ample space, it also incorporates Geely's unique, industry-leading "Safety Identification Circle", making it the most outstanding model in terms of safety coefficient within its class and even surpassing higher-class products. Definition of high-strength steel: It varies according to the degree of technological advancement required by the era. Generally speaking, alloy steel with a yield strength above 1370MPa (140kgf/mm) and tensile strength above 1620MPa (165kgf/mm) is called ultra-high-strength steel. Standards for high-strength steel: There are numerous international standards for high-strength steel, with just unified international standards including both "ISO" and "CEN". Almost every major steel-producing country has its own national standards.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.