What is the difference between a 6-speed automatic transmission and a 6-speed manual-automatic transmission?

How many years does a vehicle require biennial inspection?

Small and micro non-operational passenger vehicles require inspection once every 2 years within the first 6 years. Biennial inspection: The regulations indicate that for non-operational small and micro passenger vehicles aged 6-10 years, the annual inspection cycle has been adjusted from once a year to once every two years. Six-year exemption from inspection: Non-operational small and micro passenger vehicles with 7-9 seats will be included in the exemption from inspection. This means that non-operational small and micro passenger vehicles with 7-9 seats whose inspection period falls after November 20, 2020, if they meet the conditions, can participate in the annual inspection according to the new policy. Vehicles within the first 6 years can enjoy the exemption from inspection policy and can apply for the inspection compliance label as per the regulations.

14

1

Share

Why Can a Manual Transmission Car Shift Gears Without Pressing the Clutch?

Manual transmission cars can shift gears without pressing the clutch because experienced drivers control the speed and throttle well. The method for shifting gears in a manual transmission is: Press the clutch pedal all the way down to completely disengage the clutch; then shift the gear into first. A manual transmission car refers to a vehicle that uses a manual gear-shifting mechanical transmission to adjust speed. It requires manually moving the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed variation. The starting method for a manual transmission car: Press the clutch fully with the left foot; shift the gear lever into first gear; turn on the left turn signal and honk to alert vehicles and pedestrians in front and behind; release the handbrake, gently lift the left foot off the clutch; and lightly press the accelerator with the right foot's forefoot.

17

1

Share

Do new energy vehicles use DC or AC?

New energy vehicles use both direct current (DC) and alternating current (AC). The charging pile is connected to AC power externally and outputs DC power, which is used to charge the vehicle. Charging methods for new energy vehicles: To date, there are only two charging methods for new energy vehicles: fast charging and slow charging. Fast charging and slow charging are relative concepts. Generally, fast charging refers to high-power DC charging, and most new energy vehicles that support fast charging can reach 80% capacity in about half an hour. Slow charging refers to AC charging, and the charging process usually takes 6 to 8 hours. Charging precautions: Excessively low battery levels can easily cause the power battery to become undercharged. Long-term undercharging can seriously damage the power battery. When using an electric vehicle, it is best to follow the principle of shallow charging and discharging, and charge frequently.

9

5

Share

Do China V diesel vehicles still need to warm up?

China V diesel vehicles need to warm up. Warm-up duration for diesel vehicles: In summer, you can warm up the vehicle for one minute while stationary, whereas in winter, it's necessary to idle for about 3 minutes to complete the warm-up. Reasons: After being parked overnight, the engine oil flows back to the oil pan. Upon restarting, it takes time for the oil to gradually return to its original location. Therefore, idling for one minute after starting the vehicle provides a buffer period for the oil to return to its working position and perform its lubricating function, while also allowing the engine's operating temperature to rise to the normal working temperature. In winter, due to lower temperatures, the engine's operating environment is colder, and the oil's fluidity decreases, requiring a longer idle time for the engine temperature and oil to reach normal operating conditions.

2

Share

How Much Horsepower Does a Speedboat Have?

Speedboats are universally limited to a maximum of 40 horsepower. Introduction to Horsepower: Horsepower is equivalent to a car's power output. The greater the horsepower, the higher the maximum speed. The significance of horsepower lies in the vehicle's ultimate speed performance. Higher horsepower results in higher engine RPM and stronger acceleration. In other words, greater horsepower translates to higher speed, which is the maximum speed achievable. The maximum horsepower of an engine is related to the design of its intake system, fuel delivery system, and ignition system. At a certain RPM, when these systems are optimally matched, the engine can achieve its maximum horsepower. Methods to Increase Horsepower: Modify the car's intake system. Upgrade the air intake, air filter, and turbocharger. Modify the car's exhaust system. Alter the exhaust pipe routing to reduce bends in the muffler system. Adjust the ignition timing in the car's ECU. Modify the car's engine. Upgrade components such as spark plugs, fuel injectors, and high-tension wires; polish the cylinder head and pistons; and perform cylinder boring.

17

5

Share

What brand of engine is used in the Bestune T77?

The engine brand of the Bestune T77 is FAW Bestune, which is entirely independently developed and is a domestic engine. The engine model used in the Bestune T77 is CA4GB15TD-30, with a maximum horsepower of 169 hp, a maximum power of 124 KW, a maximum power speed of 5500 rpm, and a peak torque of 258 Nm. For the daily maintenance of the Bestune T77's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.

4

1

Share

What is the difference between a 6-speed automatic transmission and a 6-speed manual-automatic transmission?

How many years does a vehicle require biennial inspection?

Why Can a Manual Transmission Car Shift Gears Without Pressing the Clutch?

Do new energy vehicles use DC or AC?

Do China V diesel vehicles still need to warm up?

How Much Horsepower Does a Speedboat Have?

What brand of engine is used in the Bestune T77?

Why is there noticeable jerking after changing the engine oil?

What Tools Should You Keep in Your Car?

How to Use Hill Start Assist in a Car?

Should car tires be replaced simultaneously?