What is the Difference Between a 3-Cylinder Engine and a 4-Cylinder Engine?

1 Answers
OHope
07/29/25 9:31pm
3-Cylinder Engine vs. 4-Cylinder Engine: 1. Displacement Difference: Most 3-cylinder engines have a displacement below 1 liter, while 4-cylinder engines typically range from 1 to 2.5 liters. 2. Number of Cylinders: A 3-cylinder engine has three cylinders, whereas a 4-cylinder engine has four. In automotive specifications, terms like L4, V6, V8, and W12 indicate the arrangement and number of engine cylinders. Common cylinder counts in car engines include 3, 4, 6, 8, 10, and 12. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, steam engines, jet engines, and electric motors. For example, an internal combustion engine usually converts chemical energy into mechanical energy. The term 'engine' can refer to either the power-generating device or the entire machine, including the power unit.
Was this review help?
2
1
Share
More Forum Discussions

How Long is a Vehicle Inspection Valid After Expiration?

Vehicle annual inspections must be completed within 90 days before the inspection validity period indicated on the vehicle's driving license. If the inspection is overdue, the vehicle will not be allowed on the road. If caught by traffic police on-site or during an annual inspection, the penalty will be a 3-point deduction and a fine of 200 yuan. The following are issues that arise from not conducting an annual vehicle inspection: 1. Accidents involving vehicles with overdue inspections will not be covered by insurance. According to the 'Motor Vehicle Third Party Liability Insurance Clauses,' if an accident occurs while the insured vehicle has not undergone the required annual inspection, fails the inspection, or lacks other valid driving documents, the insurer will not be liable for compensation. 2. Vehicles without an annual inspection will be impounded and fined. For vehicles that have not undergone an annual inspection, traffic police can impose a fine of 200 yuan and a 3-point penalty under the 'Road Traffic Safety Law,' and the vehicle will also be temporarily impounded.
10
5
Share

What Does ECON Mean?

ECON refers to the energy-saving mode switch in cars, which can be used to turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco Mode, Comfort Mode, and Sport Mode. Below is information about these three modes: Eco Mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort Mode: This mode is considered a normal operation mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco Mode. Sport Mode: This mode can be used during aggressive driving. When Sport Mode is activated, the throttle pedal response becomes highly sensitive, and the transmission delays shifting. The transmission only upshifts when the engine speed reaches the redline. After switching to Sport Mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it achieves reduced fuel consumption and energy savings, but the power output is weakened. ECON can be understood as an abbreviation for 'economy.' In most cases, it is recommended to keep ECON mode enabled. However, it should be turned off when high torque output is required (e.g., climbing a hill) or when driving at very high speeds. Pressing the ECON button activates a low-carbon, eco-friendly driving mode. Subsequently, the ECU, engine, and transmission operate in the most fuel-efficient manner to execute the driver's intentions, achieving optimal fuel economy through rapid upshifts and smooth acceleration. The air conditioning system also operates in an energy-saving state. When the driver presses the accelerator pedal hard, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy efficiency. Although ECO mode is simple and effective, it does not work under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the car exceeds the economical speed range (typically between 60-90 km/h), ECO mode will not save fuel. The key to ECO mode is its reliance on computer-controlled operations during driving. Therefore, ECO mode does not function when the car is idling, parked, or in Neutral (N), Park (P), or manual mode. When overcoming significant resistance or requiring high torque output (e.g., climbing a hill), the ECU prioritizes delivering sufficient power to drive the car, and ECO mode will not be active in such situations.
17
4
Share

How to Identify Transmission Abnormal Noises?

Symptoms of transmission abnormal noises: 1. Additionally, pay attention to whether there is a backfire sound from the carburetor and whether the engine has severe knocking sounds. 2. If there is a "rustling" sound inside the transmission while driving, which disappears when the clutch or accelerator is pressed, and there is a sound similar to whistling during gear shifting. Below is relevant information about transmission abnormal noises: Methods to solve transmission abnormal noises: 1. The transmission has many components, and the causes of noises are relatively complex. When analyzing and judging, pay attention to: whether it is related to specific speeds, such as some planetary gears making obvious noises around 50Km/h. 2. Whether it is related to certain gears, which is very important for judging transmission faults. If a certain gear makes noise, it is definitely related to the components affecting the transmission of that gear; if all gears make noise, it is often a fault with the constant mesh gear shaft or insufficient oil in the transmission. 3. Whether it is related to specific actions, such as shifting up or down, starting, rapid acceleration, rapid deceleration, turning, etc., which are effective means to judge abnormal noises. Among them, changing speed and direction are particularly important for determining rear axle faults. If the transmission noise is obvious, it is recommended to send it to a professional repair shop to identify the faulty component and then replace it.
10
1
Share

What to Do If the Car Air Conditioning Is Not Cooling?

Solutions for car air conditioning not cooling: 1. Check for faults: Any electrical appliance can malfunction. First, check if there are any fault indicators on the dashboard. If there are, it means the air conditioning system has an issue. 2. Check refrigerant level: If the car air conditioning has been used for a long time, the refrigerant may have run out. In this case, we should refill the refrigerant for the car air conditioning. 3. Adjust the cooling setting: Sometimes, due to oversight, the cooling setting might be set too high, causing the air conditioning to blow warm air. 4. Replace the air filter: It's also possible that the air filter hasn't been replaced or cleaned for too long, leading to dust buildup that blocks the cold air. 5. Check the battery: Generally, if the battery is low on charge, it can affect the air conditioning's cooling performance. We should check if the battery is supplying power normally. 6. Visit a repair shop: If none of the above methods work, the only option is to visit a repair shop and let professional technicians diagnose and fix the issue.
4
0
Share

How to fold down the rear seats of the BYD F3?

The method to fold down the rear seats of the BYD F3 is: Pull the button next to the headrest of the rear seat, and the rear seat can be folded down. The BYD F3 is a compact car. Taking the 2020 BYD F3 Classic as an example, its body dimensions are: length 4533mm, width 1705mm, height 1490mm, wheelbase 2600mm, and fuel tank capacity 50L. The 2020 BYD F3 Classic is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 109PS, maximum power of 80kW, maximum power speed of 5800rpm, and is paired with a 5-speed manual transmission.
18
1
Share

What does it mean when the steering wheel light is on?

The reasons for the steering wheel light being on are: 1. Generator failure causing unstable power supply; 2. Power steering pump failure; 3. Loose connections in the power steering system; 4. Air in the steering system causing abnormal steering; 5. Mechanical damage to the steering gear piston cylinder, decreased sealing performance of oil seals, or damage to the control valve; 6. Foreign objects in the steering hydraulic line causing the steering pump flow control valve to stick. The solutions for the steering wheel light being on are: 1. Check whether the generator, power steering pump, and steering gear mechanism are damaged; 2. Check for any loose connections in various components; 3. Check whether the tire pressure is at the normal level; 4. Replace the power steering pump or steering gear components.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.