What is the difference between 95 and 98 gasoline for Mercedes-Benz E300?

2 Answers
NadiaDella
07/29/25 2:07am
The biggest difference between 95 and 98 gasoline lies in the amount of isooctane they contain and their anti-knock properties. The Mercedes-Benz E300 requires the use of 95 gasoline, but 98 gasoline can also be used. Below are the relevant details: 1. 95 gasoline: 95 gasoline is composed of 95% isooctane and 3% n-heptane. High-compression engines should use high-octane gasoline. If low-octane gasoline is used in a high-compression engine, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. 2. 98 gasoline: 98 gasoline refers to gasoline with an octane rating equivalent to a mixture of 98% isooctane and 2% n-heptane. 98 gasoline offers better anti-knock performance and higher power output, while also containing fewer harmful substances and producing lower exhaust emissions.
Was this review help?
9
2
Share
VonGideon
08/12/25 6:06am
I just bought a Mercedes-Benz E300 and have been using both 95 and 98 octane fuel for over a year. The difference is quite noticeable. 95 octane is cheaper and works fine for daily city commuting, but the power feels slightly weaker, and there's occasional mild engine shudder during acceleration. As for 98 octane, it costs 1-2 yuan more per liter, but the driving experience is much smoother with quicker throttle response and effortless overtaking on highways. The engine noise is also reduced, and it seems slightly more fuel-efficient, though the price difference may not fully offset the savings. I recommend choosing based on your driving habits: if you frequently take long trips or enjoy spirited driving, 98 octane is worth the investment; for regular commutes, 95 octane is perfectly adequate. Mercedes-Benz officially states that the E300 can run on 95 octane, with 98 being an upgrade option that's better for long-term engine health. Also, remember to occasionally clean the fuel system to prevent carbon buildup from affecting performance.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What to Do When the Oxygen Sensor Fails?

Solution for a failed oxygen sensor: Simply replace it with a new one. The oxygen sensor is a crucial component in a car, typically installed near the catalytic converter. All vehicles are equipped with a catalytic converter, which is designed to purify exhaust gases. There are oxygen sensors both before and after the catalytic converter. The oxygen sensor in front of the catalytic converter measures the oxygen content in the exhaust gases. This sensor transmits data to the ECU, which then adjusts the air-fuel ratio based on this information. The oxygen sensor behind the catalytic converter checks whether the catalytic converter is functioning properly. If the data from both the front and rear oxygen sensors sent to the ECU are identical, it indicates that the catalytic converter has failed. In such cases, the vehicle's dashboard will illuminate a warning light to alert the driver.
2
3
Share

Is the BYD Qin Pro compliant with China 6 emission standards?

BYD Qin Pro is compliant with China 6 emission standards. The new car adopts BYD's DragonFace design language and is equipped with an open platform to enable vehicle connectivity. The vehicle features BYD's D+ open ecosystem, with the DiLink intelligent connectivity system as the platform, consisting of four parts: Di platform, Di cloud, Di ecosystem, and Di open, comprehensively connecting people, vehicles, society, and life. In terms of appearance, the BYD Qin Pro features a full-width LED taillight at the rear, with chrome trim embedded to enhance the three-dimensional effect of the taillights. The turn signals also adopt a flowing design. The side profile of the car features a fastback shape, with a waistline extending from the front to the rear, embodying the design concept of a sleek 'dragon waist'.
8
1
Share

How to Determine the Condition of a Compressor?

Methods to determine the condition of a compressor: Identify the three terminals on the air conditioning compressor, which are S, R, and C. Here, S is the start winding, R is the run winding, and C is the common terminal. Then, use a multimeter to measure the resistance values. The sum of the resistances between SC and RC should equal the resistance between RS for normal operation. Sometimes, even if the multimeter shows normal readings, it may not detect an internal short circuit in the compressor. In such cases, a simpler method is to check the power supply with the multimeter. If the compressor is receiving power but does not start, try replacing the start capacitor. If the compressor still does not start after replacing the capacitor, then the issue lies with the compressor itself.
11
0
Share

Is the Locking Sound Getting Quieter Due to Low Battery?

The decrease in the locking sound is not necessarily due to low battery. You can try starting the engine to see if it can be ignited. If the engine starts, then the issue is not related to the battery but rather the horn. Below is an introduction to the reasons why the car locking sound becomes quieter: Reasons: The microphone (MIC) is damaged, components are leaking electricity or have changed in value, re-soldering or replacing the audio (power, CPU), increasing the working voltage of the microphone (MIC). Solutions for low sound: Check if the device microphone is blocked, see if the "Mute" function on the call interface has been clicked, try changing locations (to rule out network issues), if the phone supports noise reduction, it is recommended to disable noise reduction and try.
12
1
Share

How often should tubeless tires be replaced?

Electric vehicle tubeless tires generally have a service life of three years. Below is extended information about the service life of electric vehicle tubeless tires: Wear condition: Tubeless tires usually have two wear indicators: one is a small triangular symbol; the other is a 1.6 mm high mark protruding from the tire groove. Once the wear on the tubeless tire reaches these indicators, the tire needs to be replaced. Radial ply: If the radial ply is damaged, the structural integrity of the entire tire cannot be guaranteed, and the tire may burst at any time. Cuts: The deepest side cut should not exceed 4 millimeters. Bulges: If bulges appear on the side of the tire, it should be replaced immediately.
9
4
Share

What is the fuel consumption of the ns125d?

The comprehensive fuel consumption of the ns125d per 100 kilometers is basically maintained at around 2.2L. Here is an introduction to the ns125d: Design: This car still adopts a compact design, with a wheelbase of 1246mm and a curb weight of 108kg. Such figures make this car relatively flexible and lightweight. In addition, the low center of gravity design also ensures good riding stability, coupled with the unique operating characteristics of a scooter. Power: To enhance competitiveness, the Honda NS125D uses the same powertrain as the Split Line 125, equipped with the Honda NSC engine and matched with the Honda PGM-FI electronic fuel injection system. The combination of the two greatly improves the performance of the car, but the fuel consumption is slightly inferior, with a fuel consumption of 2.2L per 100 kilometers.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.