What is the difference between 91v and 94v?

Where are the brake and clutch located in a manual transmission car?

Clutch pedal is located on the left side and operated by the left foot. Here are some relevant introductions about manual transmission: 1. Concept: It means that the gear meshing device inside the transmission can only be changed by manually moving the gear lever to alter the transmission ratio. 2. Working principle: By using the shift fork to change the transmission ratio (gear ratio) of the meshing gears, the driving torque is then changed to suit different working conditions. The correct operation method of depressing the clutch and releasing the accelerator is that depressing the clutch and releasing the accelerator should be done simultaneously (or almost simultaneously). Even if there is a sequence, it should be depressing the clutch first and then releasing the accelerator. Note that the time of releasing the accelerator should not be too delayed.

16

3

Share

What Are the Reasons for the Engine Malfunction Light Staying On?

The engine malfunction light may stay on for the following 7 main reasons: Sensor failure: The sensors mentioned here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine malfunction light. Fuel quality issues: Failure to add fuel and engine oil as required by the manufacturer may cause engine wear, leading to the malfunction light turning on. Poor combustion of the air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all lead to poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to turn on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust pipe. Intake issues: Problems with the vehicle's intake can lead to engine pipeline blockages, and in severe cases, trigger the engine malfunction light. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust issues: Exhaust system failures can also cause the engine malfunction light to illuminate. Causes of exhaust problems include failures of the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or faults in the engine fuel supply system can easily lead to catalytic converter failure. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, accompanied by the engine malfunction light turning on. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally, looking for symptoms such as shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check upon powering on. After 5-10 seconds, observe whether the malfunction light on the dashboard turns off. If the malfunction light remains on, visit a service station as soon as possible to diagnose the issue. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.

4

5

Share

Is 0W20 Engine Oil Mandatory for the New Magotan?

0W20 engine oil has too low viscosity for the Magotan's engine, so it is not suitable for the Magotan. Engine oil is referred to as the lifeblood of the engine. Without engine oil, the engine cannot operate normally. Engine oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat within the engine. More relevant information is as follows: 1. Engine Oil: If there is no engine oil in the engine, the engine cannot operate normally. During engine operation, engine oil forms a thin film on the surfaces of various components inside the engine, preventing direct contact and friction between them. 2. Friction: If the components inside the engine come into direct contact and cause friction, it will accelerate engine wear and may also lead to engine overheating. If the engine continues to operate in an overheated state, it can result in severe engine malfunctions. Over time, all performance characteristics of engine oil degrade, so it is necessary to replace engine oil regularly.

11

5

Share

Which Sedans Can Reach 240 km/h?

For example, the Volkswagen Magotan, BMW 3 Series, Mercedes-Benz C-Class, and Volvo V60, among others. Below is relevant information about vehicle speed: 1. Definition: Vehicle speed refers to the distance a car travels per unit of time, commonly referred to as speed, with the usual units being kilometers per hour or meters per second. 2. Overview: Vehicle speed is one of the three parameters describing traffic flow and holds significant importance in traffic flow theory research. Vehicle speed can also broadly refer to motor vehicle speed. To suit different purposes, vehicle speed is mainly categorized into spot speed, segment speed, and design speed.

17

5

Share

Must I Book the Driving Test Before Practicing for Subject 3?

Yes. Here are the key details for the Subject 3 test: 1. Familiarize yourself with the lights: More than half of the tasks in Subject 3 require the use of lights. Develop the habit of using turn signals; whenever there is a change in direction, signal must be used, and wait for 3 seconds after the light is on before turning the steering wheel. 2. Slow down: Subject 3 underwent a reform in recent years, after which voice prompts for crosswalks, intersections, bus stops, and schools were removed. Students must observe traffic signs on the roadside and apply the brakes to slow down within 30 meters of these areas, otherwise they will fail the test. 3. Master gear shifting: Students unfamiliar with gear positions tend to look down when shifting gears, which is strictly prohibited in Subject 3. If unsure of the current gear, place your hand on the gear lever and determine the gear based on memory. When shifting gears, the clutch must be fully depressed, gear skipping is not allowed, and coasting in neutral is prohibited.

18

1

Share

Are there any regulations for gear shifting in Subject 3?

It is recommended to maintain a speed of 30 mph in 3rd gear. The driving test requires starting the vehicle in 1st gear, transitioning to 2nd gear, and using 3rd and 4th gears for normal driving speed. Additionally, driving in 1st gear should not exceed 50 meters, and driving in 3rd gear should not exceed 300 meters. The key points for matching gears with speed in Subject 3 are as follows: 1. Starting: Gently release the clutch, and once the car starts moving, lightly press the accelerator. When the speed reaches above 10 mph, shift to 2nd gear. 2. Normal driving: Shift to 3rd gear above 25 mph, to 4th gear above 35 mph, and to 5th gear above 45 mph. Avoid shifting too quickly during gear changes to prevent mis-shifting. Remember the gear positions, and most importantly, avoid shifting to the wrong gear. 3. Encountering traffic lights: Stop when necessary. When the red light has about 10 seconds remaining, start in 1st gear, add some throttle to shift to 2nd gear, and then continue driving. 4. Turning: Turn on the turn signal, press the clutch, and brake to reduce speed to around 20 mph, then shift to 2nd gear to complete the turning maneuver slowly. 5. Parking: Press the clutch and brake, adjust the car's position relative to the roadside line, and stop the car when appropriate.

4

1

Share

What is the difference between 91v and 94v?

Where are the brake and clutch located in a manual transmission car?

What Are the Reasons for the Engine Malfunction Light Staying On?

Is 0W20 Engine Oil Mandatory for the New Magotan?

Which Sedans Can Reach 240 km/h?

Must I Book the Driving Test Before Practicing for Subject 3?

Are there any regulations for gear shifting in Subject 3?

What to Do When the Car Steering Gear is Leaking Oil?

What are the symptoms of a broken timing belt?

How many cylinders does the Changan Eado engine have?

What is the difference between Changan Mazda and FAW Mazda?