What is the difference between 91V and 91H on tires?

2 Answers
BethanyLynn
07/28/25 10:37pm
The difference between the two lies in the maximum supported speed of the tires. V and H represent speed ratings, with different letters indicating different maximum speed limits. V stands for a maximum supported speed of 240 km/h, while H represents a maximum supported speed of 210 km/h. As for the preceding number, it denotes the load index. What does that mean? 91 indicates that the maximum load capacity supported by a single tire is 615 kg. What is the difference between 91V and 91H on tires? Do you know now?
Was this review help?
18
5
Share
MacEmily
08/12/25 3:06am
When I first started driving, I also didn't understand the letters and numbers on tires, like the difference between 91V and 91H. The key lies in the letter part. The number 91 indicates the load capacity, which is basically the same, able to bear about 615 kilograms. But V and H represent speed ratings. H-rated tires can only go up to 210 kilometers per hour, while V-rated tires can reach 240. This means if you often drive over 210 km/h, using H-rated tires may pose a risk of blowouts, whereas V-rated tires are designed to be more robust for high-speed driving. Different car models also need to be considered. For regular family cars, H-rated tires are sufficient and cost-effective, but for sports cars, it's better to choose V-rated tires to ensure safety. Actually, when changing tires, they should match the recommendations in the vehicle manual. Mismatched tires might affect handling performance and even insurance claims. It's advisable to have a professional shop check your tire markings.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What does intelligent cylinder deactivation technology mean?

The so-called intelligent cylinder deactivation technology refers to a series of "methods" that allow some cylinders to stop working (enter a dormant state) when the engine is operating under medium to low load conditions, while the remaining cylinders continue to function normally. This helps reduce fuel consumption and exhaust emissions. When high load operation is required, all cylinders are activated to ensure there is no perceived lack of power. Below is relevant information: 1. Application of intelligent cylinder deactivation technology: This technology is typically used in multi-cylinder, large-displacement engines such as V8, V10, and V12 engines. The advantage of variable cylinder technology lies in its ability to shut down some cylinders during low-load operation or deceleration, using only the remaining cylinders to reduce fuel consumption. 2. Fuel efficiency of intelligent cylinder deactivation technology: When the vehicle requires high power output, such as during rapid acceleration or climbing, the system automatically engages all cylinders to provide sufficient power. This balances both economy and performance, achieving intelligent power management. Additionally, when some cylinders are deactivated, the system increases the workload of the remaining cylinders, indirectly improving their fuel efficiency and reducing fuel consumption, typically saving around 8% in fuel usage.
15
0
Share

How Often Should a Car Battery Be Charged?

How often a car battery should be charged depends mainly on the battery capacity and mileage of the electric vehicle, rather than time. Currently, mainstream pure electric vehicles in China can travel 300-400 kilometers (theoretical value) on a single charge, with some imported models exceeding 500 kilometers. Below are relevant details: 1. Factors affecting mileage: The main factors influencing an electric vehicle's range include battery capacity, driving speed, vehicle power, controller performance, motor performance, vehicle weight and load intensity, riding habits, temperature, battery aging degree, charger quality, and charging duration. The battery is just one of many factors, not the most critical one. 2. Regular charging: Even fully charged batteries require periodic charging, generally under three circumstances: First, start the car and use its own generator to charge, which should be done fully every half month; second, use an external charger to charge, which should be done fully every month; third, charge the car battery, which should be done fully every three months.
13
1
Share

Can You Mix Gasoline from Different Gas Stations?

Gasoline from different gas stations and brands can be mixed as long as they have the same octane rating. If the octane ratings are different, even if they are from the same brand, they should not be mixed. Mixing different octane fuels can lead to abnormal combustion, causing engine knocking. Besides damaging the combustion chamber, knocking can directly affect the normal operation of the engine and may even cause severe engine damage. To determine the appropriate fuel grade for your vehicle, you can refer to the car's user manual or check the fuel grade marked on the fuel tank cap. How to handle adding the wrong gasoline: If you add gasoline with a higher octane rating than specified (e.g., using 95 octane when 92 is recommended), simply switch back to the recommended 92 octane after consuming the current fuel. If you add gasoline with a lower octane rating than specified (e.g., using 92 octane when 95 is recommended), you can add a high anti-knock fuel additive. Alternatively, you can drain the fuel tank and refill it with the correct 95 octane gasoline.
12
3
Share

Is it illegal to drive with a car trunk unable to close due to cargo?

Driving with a car trunk unable to close due to cargo is, strictly speaking, a violation and thus illegal. An open trunk poses a risk of items falling out, which could become road hazards. Additionally, an open trunk can obstruct the view of drivers behind, compromising their driving safety. However, in practice, traffic police usually do not intervene. Even if caught, the typical reason cited is "mixing passengers with cargo," and the usual response is a verbal warning rather than a penalty. However, transporting hazardous materials can result in fines and demerit points. Relevant laws and regulations: "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" Article 54: The load of a motor vehicle shall not exceed the permitted load capacity specified on the vehicle's registration certificate, and the length and width of the load shall not exceed the dimensions of the vehicle body. The following provisions shall also be observed: 1. For heavy and medium-duty trucks and semi-trailers, the height of the load from the ground shall not exceed 4 meters, and for container transport vehicles, it shall not exceed 4.2 meters; 2. For other motor vehicles carrying cargo, the height of the load from the ground shall not exceed 2.5 meters; 3. For motorcycles, the height of the load from the ground shall not exceed 1.5 meters, and the length shall not exceed the body by 0.2 meters. For two-wheeled motorcycles, the width of the load shall not exceed the handlebars by 0.15 meters on each side; for three-wheeled motorcycles, the width of the load shall not exceed the body; 4. Passenger vehicles, except for external roof racks and built-in luggage compartments, shall not carry cargo. For roof racks on passenger vehicles, the height of the load from the roof shall not exceed 0.5 meters, and the total height from the ground shall not exceed 4 meters.
17
5
Share

How Many Years Can Winter Tires Be Used?

Winter tires generally have a normal service life of 3-4 years, or 50,000-60,000 kilometers. When the tread pattern wears out, winter tires can still be used as all-season tires for about one more year. Here is relevant information about winter tires: Functions of winter tires: 1. Winter tires are specifically designed and manufactured for snowy winter conditions. 2. They can improve a vehicle's passability and safety on snow/ice-covered roads. 3. They enhance braking performance on snow/ice, shorten braking distance, and provide ideal traction. When driving in snow, there will be differences in tire handling, comfort, noise, and speed limitations compared to summer tires.
19
3
Share

How to Open the Engine Hood of the Buick Excelle?

The operation to open the engine hood of the Buick Excelle is as follows: 1. Locate the engine hood release lever below the left side of the steering wheel, pull it upward to release, and then return it to its original position. 2. There is a safety lock in the middle front of the hood; move it toward the driver's side and then lift the engine hood. When closing the engine hood: 1. First, lower the hood support stand, use your other hand to hold the hood, and slowly lower it. When the hood is about 50mm-60mm from closing, release it to allow it to fall freely. You will hear a 'clunk' sound indicating it is locked. 2. If the hood is not allowed to fall freely from this distance, it may not close properly. Of course, if released from too high, it might cause distress to car owners who care about their vehicles.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.