What is the difference between 4S genuine parts and original car parts?

1 Answers
FrankLynn
07/30/25 8:08am
The difference between 4S genuine parts and original car parts is mainly reflected in their different meanings. The following is a specific introduction to the differences between 4S genuine parts and original car parts: Genuine parts: Parts produced by the main factory's regular suppliers, not the car's original factory, but by the same production supplier as the original car, and also sold in the market, including brand parts and imitations. Original car parts: The parts that come with the car, genuine parts from the car's original factory, exactly the same as the original car parts. In fact, these are the real genuine parts. Note: In addition to the original factory parts used when the car leaves the factory, the spare parts at 4S stores are also genuine parts, ordered directly from the factory.
Was this review help?
13
3
Share
More Forum Discussions

How to Solve High Fuel Consumption in Sedans?

When a car starts at low speed, it is in the peak fuel consumption zone. Therefore, gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. Avoid unnecessary high RPM as much as possible, as fluctuating engine speeds can also significantly increase fuel consumption. Change the engine oil and remove carbon deposits. Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.
13
0
Share

Can Water Enter a Car's Transmission?

When a vehicle passes through excessively deep water, there is a possibility of water entering the transmission, which can lead to malfunctions. There are two scenarios for transmission water ingress: If the water level exceeds two-thirds of the wheel height: The probability of water entering the transmission is approximately 80% to 90%. If the water has already submerged the dashboard: The transmission is 100% certain to have water ingress. Here are three key practices for driving through water: Turn off the air conditioning: When the air conditioning is on, the electric fan located at the front of the vehicle will rotate. During water crossings, the rotating fan blades can stir up water splashes, potentially causing water to enter the transmission. Therefore, it is advisable to turn off the air conditioning before entering deep water and wait for the electric fan to stop before proceeding. Meeting oncoming vehicles in water: If you encounter an oncoming vehicle while driving through water, pay close attention to the height of the water waves generated by the front of their vehicle. If the waves are too high, you should accelerate slightly. This is because the waves created by your own vehicle can help counteract those from the oncoming vehicle, reducing the risk of water ingress. It is crucial to remain calm in such situations and avoid braking suddenly. Turn off all onboard electrical devices: Examples include the air conditioning and dash cams. The purpose is to prevent electrical equipment from short-circuiting or losing power due to water exposure.
16
1
Share

What to Do If You Can't Reverse into the Parking Space?

Control the speed properly, not too fast. Turn your body sideways and focus on the right rear wheel in the right rearview mirror. Turn the steering wheel to the left in half-turn increments, then continue watching the right rear wheel. Keep an eye on the right rear wheel. When it is exactly on the right extension line of the parking space, quickly turn the steering wheel all the way to the right. Generally, the distance should be 10cm-15cm at this time. Immediately look at the left rearview mirror. When the left corner of the parking space appears, straighten the wheel and make minor adjustments. Stop at the designated point.
18
5
Share

How to Remove the Door Inner Trim Panel?

Use a flat-head screwdriver to pry open the lower trim panel of the door handle, starting from the middle downward and then outward (for the rear door, pry the front part first). There are two black 8mm hex bolts inside; use a socket wrench to remove them, then unplug the window switch connector. Use a flat-head screwdriver to pry open the door handle trim panel from front to back, and remember to pull the door handle while removing it. Gently pry open a small gap at the bottom of the door trim panel with your hand, then insert a flat wrench to leverage it off. The trim panel is secured to the door panel with a ring of plastic clips.
11
1
Share

What to Do After Failing the Driving Test Level 3?

Master the basic skills. Build confidence correctly to overcome nervousness effectively and believe in your ability to succeed. Enhance training on error correction and situation handling. Don't be afraid of making mistakes during practice—correct them, relearn, and summarize experiences promptly. Familiarize yourself with the test site in advance. Being in an unfamiliar environment can automatically trigger nervousness, reducing brain function and thinking capacity.
3
3
Share

How to Check How Many Cars Are Under Your Name on 12123?

For first-time individual users, you need to use your personal ID card, register a real-name account, and log in to the 12123 APP. After registering an account, you can bind non-operational motor vehicles under your name on the page. Of course, users can also register up to 3 non-personally owned motor vehicles. Click in to view the car information under your name. If you want to check violation records, simply click on the violation section to view them.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.