What is the difference between 4LLC and 4HLC?

1 Answers
MacMalia
07/28/25 3:13pm
4HLC and 4LLC differ in their meanings, usage scenarios, and operational limitations, as detailed below: "4HLC": Represents low-range four-wheel drive. Drivers should switch to this mode when encountering snowy or icy road conditions, as it provides excellent traction and superior handling performance. The corresponding speed for "4HLC" should be kept below 40 km/h. "4LLC": Represents ultra-low-range four-wheel drive. This mode is used in extremely harsh environments such as swamps or deserts. 4LLC is employed for full-time four-wheel drive when climbing steep slopes with a gradient of 1:4 or greater, or when requiring greater towing capacity (for towing trucks weighing 3-5 tons or more) and driving torque.
Was this review help?
10
2
Share
More Forum Discussions

Where in Zhejiang is the license plate with 'Zhe J' from?

Zhe J license plate is from Taizhou City, Zhejiang Province. 'Zhe' is the abbreviation for Zhejiang Province. The license plate codes for various cities in Zhejiang Province are as follows: Zhe A for Hangzhou, Zhe B for Ningbo, Zhe C for Wenzhou, Zhe D for Shaoxing, Zhe E for Huzhou, Zhe F for Jiaxing, Zhe G for Jinhua, Zhe H for Quzhou, Zhe J for Taizhou, and Zhe K for Lishui. The license plates used on vehicles consist of letters and numbers. The Chinese character at the front of the license plate refers to the province, and the letter represents the prefecture-level city. Each prefecture-level city in a province uses a different letter, and some cities use two letters. The license plate number is the identification plate for the vehicle and the only proof that can verify the vehicle's identity, equivalent to an ID card.
2
2
Share

Does the Changan Yuexiang V3 use a Suzuki engine?

The Changan Yuexiang V3 does not use a Suzuki engine; it is equipped with an engine independently developed by Changan. This vehicle utilizes two types of engines: one is a 1.3-liter naturally aspirated engine, and the other is a 1.4-liter naturally aspirated engine. The engine's maximum torque speed ranges from 4,000 to 5,000 rpm, and the maximum power speed is 6,000 rpm. The dimensions of the Changan Yuexiang V3 are 4,180mm in length, 1,650mm in width, and 1,465mm in height, with a wheelbase of 2,410mm. The front suspension of this vehicle employs a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. The multi-link independent suspension is a product improved based on the double-wishbone suspension, where the two wishbones of the double-wishbone suspension are replaced with separate links, enhancing the wheel's ground contact performance.
15
5
Share

What gear should be engaged when the engine is left running for a long time?

For manual transmission vehicles that are left running for a long time, you can shift into neutral (N) and engage the handbrake. For automatic transmission models, you can either shift into neutral (N) and engage the handbrake or shift into park (P) and firmly apply the handbrake. However, it is not recommended to leave the engine running for extended periods because prolonged idling is harmful to the engine. When the vehicle is idling, combustion is incomplete, producing harmful gases such as carbon monoxide. If someone is sleeping in the car with the air conditioning on and the windows closed, there is a risk of poisoning. Additionally, prolonged idling can cause the engine compartment temperature to rise, increasing the risk of spontaneous combustion, especially during hot summer days. Idling also leads to increased carbon buildup, resulting in issues such as higher fuel consumption, unstable idling, and sluggish acceleration.
7
0
Share

Should the Huanglong 600 use 92 or 95 octane gasoline?

The Huanglong 600 should use 95 octane gasoline. The engine used in the Huanglong 600 specifies a minimum fuel grade of 95 octane. This motorcycle's engine has a relatively high compression ratio, thus requiring higher-octane fuel. Below are relevant details: 1. Detail one: The Huanglong 600 falls into the category of heavy-duty motorcycles, with a body weight of 220kg, a displacement of 600cc, featuring an inline four-cylinder design and water-cooled cooling system. Its top speed can reach 218km/h. 2. Detail two: The Huanglong 600 is a model produced domestically by Qianjiang Motorcycle after acquiring Italy's Benelli Motorcycle, based on the prototype design and utilizing Benelli's mature technology. It belongs to a typical Italian-style street bike model. Compared with traditional Japanese street bikes, its seating design has a stronger forward-leaning feel, with a riding posture positioned between sports bikes and street bikes.
2
1
Share

What grade of engine oil should be used for the Crown 2.0t?

You can use fully synthetic 5W-30 engine oil. Below is some extended information about engine oil: 1. Engine oil can be divided into mineral oil, semi-synthetic oil, and fully synthetic oil. 2. If using mineral oil, it generally needs to be replaced every six months or after driving about 5,000 kilometers. 3. If using semi-synthetic oil, it should be replaced every 7-8 months or after driving about 7,500 kilometers. 4. If using fully synthetic oil, it can be replaced after one year or 10,000 kilometers of driving. Below is some extended information on how to choose engine oil: 1. If you prioritize long-term performance, you can use Mobil engine oil. 2. If you prioritize the cleaning ability of the oil for the engine, Shell engine oil is recommended. 3. If you prioritize strong oil film toughness, Castrol is the recommended choice.
18
1
Share

How Often Should the Transmission Fluid Be Changed for a Toyota Camry?

Transmission fluid replacement intervals are calculated similarly to vehicle maintenance cycles, based on mileage or time. For the Toyota Camry, the transmission fluid should be changed every 40,000 kilometers. Below are the functions of transmission fluid: 1. Ensures normal operation of the transmission and extends the lifespan of the transmission components. 2. Provides effective lubrication even at low temperatures. 3. Reduces fluid loss under harsh operating conditions. Below is the method for changing transmission fluid: 1. Drain all the fluid from the oil pan, then refill with new fluid. Next, disconnect the outlet pipe from the transmission to the transmission fluid cooler and use an air tank to blow air, pushing the fluid from the cooler back into the transmission through the return pipe. 2. Connect a long tube to the interface where the outlet pipe was removed. Start the engine, shift between D and R gears, and run for 5 to 10 minutes. The transmission will begin circulating, pumping the old fluid out through the connected tube. When new fluid starts coming out, you can turn off the engine.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.