What is the difference between 30 and 40 engine oil?

What is the maximum wading depth of the Mercedes-Benz G63?

According to official specifications, the maximum wading depth of the Mercedes-Benz G63 is 700mm. It commonly features tire specifications of 295/40R22, a vehicle height of 1979mm, and is configured as a 5-door, 5-seat SUV. Maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, sedans have a maximum wading depth not exceeding 300mm, while SUVs can handle slightly deeper water, though it's advisable not to exceed 500mm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 700mm, the Audi A4 at 320mm, the Volkswagen Sagitar at 700mm, the Land Rover Range Rover at 900mm, the Jeep Compass at 800mm, and the Toyota Highlander at 455mm. SUVs typically exhibit higher wading depths compared to sedans. Generally, when driving through water, vehicle owners should take different measures based on water depth and vehicle characteristics, as detailed below: When water reaches the exhaust pipe level, the situation remains safe. Even if water enters the exhaust pipe, the internal pressure can expel it. As long as the engine isn't turned off in the water, backflow into the vehicle won't occur. When water reaches the door sill height, it becomes hazardous. Most electrical circuits, components, and sensors are located at the vehicle's base, risking circuit shorts that may damage critical electronics and prevent normal startup. When water reaches the air intake level, it's extremely dangerous. Driving directly into such conditions may cause immediate engine stalling, resulting in permanent engine damage or complete failure.

16

2

Share

What is the maximum wading depth of the Mercedes-Benz G63?

The maximum wading depth of the Mercedes-Benz G63 is 600mm. The wading depth of the Mercedes-Benz G63 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Mercedes-Benz G63 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe engine damage due to water ingress. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

15

1

Share

Where to Buy a Red Badge Civic?

The Red Badge Civic can be purchased from local parallel import car dealers. Here is a brief introduction to the Red Badge Civic: 1. Basic Information: The first Honda model in history to feature a red "H" badge was the "NSX-R." This car boasts performance comparable to Ferrari, making it a legend among Honda enthusiasts. Following the tremendous success of this model, Honda began applying the red badge to its performance-oriented models. 2. Powertrain: Although the Honda Civic Type-R may look similar to the standard Civic, its "inner workings" are entirely different. The Red Badge Civic is equipped with a K20C1 inline 4-cylinder "red top" engine. This 4-cylinder engine delivers a maximum power output of 235 kW, a top speed of 272 km/h, and can accelerate from 0 to 100 km/h in just 5.7 seconds.

10

2

Share

What is the trunk capacity of the Accord?

2018 Accord trunk dimensions: depth ranges from 1170-2100mm, width is 1400mm, and height is 550mm. The interior space design is quite regular, fully meeting the needs of daily household cargo carrying. However, the rear seats can only be folded down as a whole, which slightly compromises practicality. Here is some extended information: About the Accord: The Accord is Honda's embodiment of innovative spirit and globally leading technology, with a 38-year history worldwide. The original tires equipped on the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. In September 2013, the first Chinese model featuring Honda's "Earth Dreams Technology"—the ninth-generation Accord by GAC Honda—made its debut.

11

3

Share

What are the functions of the 4 buttons on the Nissan Sylphy car key?

The 4 buttons on the Nissan Sylphy car key are the lock button, unlock button, trunk release button, and car locator button. Below is additional information: 1. Body dimensions: The vehicle's body length is 4641mm, width is 1815mm, height is 1450mm, wheelbase is 2712mm, front track is 1588mm, rear track is 1594mm. It is a four-door five-seater sedan with a fuel tank capacity of 47 liters and a trunk capacity of 560 liters. 2. Dongfeng Nissan: The vehicle is manufactured by Dongfeng Nissan, which is Dongfeng Nissan Passenger Vehicle Company. The company was established on June 16, 2003, and is a state-owned joint venture. It is an automotive enterprise with full industrial chain value and serves as a crucial passenger vehicle segment under Dongfeng Motor Co., Ltd. The headquarters is located in Huadu, Guangzhou.

3

4

Share

What is the SEEK5?

SEEK5 is the third model launched by Junma Motors. Here are the specific details: 1. SEEK5 specifications: This is a mid-size SUV, offering two powertrain options, equipped with 1.8L and 1.5T engines respectively. The 1.5T turbocharged engine includes both high and low power versions. The 1.8L engine delivers a maximum power of 102kw and a maximum torque of 187 Nm, while the 1.5T low-power engine produces a maximum power of 110kw and a maximum torque of 230 Nm. The 1.5T high-power engine generates a maximum power of 115kw and a maximum torque of 215 Nm. 2. SEEK5: The SEEK5 is the third model launched by Junma Motors. The exterior design of this vehicle does not adopt the family-style design concept, nor does it deliberately imitate some popular models in the market. Instead, it maintains a highly original design, providing a completely new visual experience with its exterior styling.

4

Share

What is the difference between 30 and 40 engine oil?

What is the maximum wading depth of the Mercedes-Benz G63?

What is the maximum wading depth of the Mercedes-Benz G63?

Where to Buy a Red Badge Civic?

What is the trunk capacity of the Accord?

What are the functions of the 4 buttons on the Nissan Sylphy car key?

What is the SEEK5?

How Often Should Power Steering Fluid Be Replaced?

Will Skoda Discontinue Production?

What does the association of brake switch A/B mean?

Can the owner apply for ETC without a driver's license?