What is the difference between 200-cell and 300-cell headers?

1 Answers
AlexisRose
07/29/25 7:17pm
Different emission levels: 300-cell: Vehicles with 300-cell headers have higher exhaust flow, resulting in correspondingly increased emissions. 200-cell: Vehicles with 200-cell headers have relatively lower exhaust flow compared to 300-cell, leading to lower emissions than 300-cell. Different sound levels: 300-cell: The sound from 300-cell exhaust pipes can reach up to 150 decibels. 200-cell: The sound from 200-cell exhaust pipes is around 100 decibels. Different exhaust combustion efficiency: 300-cell: Due to the larger exhaust pipes in 300-cell headers, some incompletely burned gases may be expelled, making it less likely to meet environmental standards. 200-cell: With smaller exhaust volume compared to 300-cell, gases are expelled through the exhaust pipes after more complete combustion, resulting in different exhaust combustion efficiency between the two.
Was this review help?
9
0
Share
More Forum Discussions

How to Use the Auto-Folding Function of the Besturn T77 Rearview Mirror?

First, press the vehicle's one-touch start button to power on the vehicle; otherwise, the function cannot be activated. Then, locate the window control buttons on the right side of the vehicle's armrest. By rotating the rearview mirror knob, you can adjust the rearview mirror. Turn the rearview mirror knob to the button position, and the rearview mirror will automatically fold.
9
0
Share

What is the optimal speed to use the S gear?

Automatic transmission's S gear is actually short for Sport gear, which is a sport mode that emphasizes power output. Due to its strong power, the S gear is generally used when overtaking or climbing hills. After completing the action, it is switched back to the more economical D gear, as from a fuel consumption perspective, the S gear mode consumes more fuel than the normal mode due to increased fuel injection at high RPMs. Below is an introduction to automatic transmission gears and usage precautions: 1. P gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the shift lever to engage the P gear. 2. R gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal, press the unlock button at the front of the shift lever, engage the R gear, and after releasing the brake pedal, slowly press the accelerator to move the vehicle backward. 3. N gear: Neutral gear. The shift lever can be directly moved from R or D gear to N gear. When moving the shift lever out of N gear, the brake pedal must be pressed. 4. D gear: Drive gear. The shift lever can be directly moved from N gear to D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and vehicle speed.
3
3
Share

Which provinces and cities are piloting ethanol gasoline?

Regions in China using ethanol gasoline include: 1. Heilongjiang, Jilin, Liaoning, Henan, Anhui, and Guangxi provinces; 2. Bayannur City, Wuhai City, and 6 cities in Jiangsu Province (Xuzhou, Lianyungang, Huaian, Yancheng, Suqian); 3. 7 cities in Shandong Province (Jinan, Zaozhuang, Jining, Tai'an, Linyi, Liaocheng, Heze); 4. 9 cities in Hubei Province (Wuhan, Xiangfan, Jingmen, Suizhou, Xiaogan, Shiyan, Yichang, Huangshi, Ezhou); 5. 6 regions in Hebei Province (Shijiazhuang, Baoding, Xingtai, Handan, Cangzhou, Hengshui). 6. Among these, Liaoning, Jilin, Heilongjiang, Henan, Anhui, and Guangxi provinces implement "full-closed" promotion, where all gas stations in principle must provide ethanol gasoline exclusively without mixing regular gasoline; while Jiangsu, Hubei, Hebei, Shandong, and Guangdong provinces adopt "semi-closed" promotion, with some gas stations offering both regular gasoline and ethanol gasoline.
7
5
Share

What is the function of the Jetta sensor?

Jetta sensors play a role in detecting vehicle conditions. The working principle of Jetta vehicle sensors is to convert various operating condition information during vehicle operation, such as speed, temperature of various media, engine operating conditions, etc., into electrical signals and transmit them to the computer, so that the engine can be in the optimal working state. The detection method of the camshaft position sensor is as follows: 1. Unplug the connector, turn the key to the second gear, and use a voltmeter to measure and confirm that the power line has voltage output; 2. Use the meter to determine the ground wire, connect one probe of the voltmeter to the confirmed power line, and connect the other probe to the other two wires to measure the one with voltage as the ground wire, and the remaining one is the signal wire; 3. At this time, turn off the key to lead out the signal wire, plug back the connector to start the engine, and measure the signal wire and the ground wire to see if there is a signal voltage output. The output voltage should be less than the supply voltage. If not, the sensor is damaged; 4. At the same time as the above steps, check whether the signal teeth on the camshaft are in good condition, whether there is any debris between the camshaft sensor and the signal teeth, and whether the gap is normal.
14
2
Share

How to Find Reference Points for Reverse Parking?

First method: Align the left rearview mirror with the right starting line. Second method: Align the angle between the right rear window center pillar and the garage entrance line. When the vehicle body is straight and centered in the garage, it indicates that right-side parking is about to be completed, and the stopping point is the second reference point.
6
0
Share

How to Connect Bluetooth for the 13th Generation Crown?

First, press the TEL button on the vehicle's center console to activate the car's Bluetooth. Then, rotate the center console knob and select 'Connect New Device'. Next, turn on the Bluetooth switch on your phone. Finally, select the Bluetooth name of the vehicle and click to connect.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.