What is the difference between 10w40 and 5w30?

How to Turn on the Fog Lights of the Roewe i5?

The method to turn on the fog lights of the Roewe i5 is as follows: The fog light control is located on the light control lever to the left of the steering wheel. The middle knob adjusts the fog light switch. Turning the middle knob to the O position turns off the rear fog lights, while turning it to the lower position turns on the vehicle's fog lights. The left side of the Roewe i5's steering wheel features buttons for switching songs, muting, and answering calls, while the right side houses the wiper controls, including automatic wiping, slow wiping, and fast wiping. The Roewe i5 measures 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. The car's engine delivers a maximum horsepower of 169Ps, a maximum power of 124kW, and a maximum torque of 250Nm.

9

2

Share

How to adjust the date on a Golf?

The method to adjust the date on a Golf is as follows: There is only one button in the center of the dashboard. Press and hold this button for approximately 3 to 5 seconds until the word "clock" appears. Release the button, and the time interface will be displayed with the hour selected. Press the button once to adjust the hour. After adjusting the hour, wait for 3 to 5 seconds, and the display will switch to minutes. Then, select and adjust the minutes. The dimensions of the Golf 7 are 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm. Its engine has a maximum horsepower of 115Ps, a maximum power of 85kW, and a maximum torque of 200Nm.

2

Share

What does MacPherson independent suspension mean in cars?

MacPherson independent suspension is a type of suspension structure named after its inventor, MacPherson, and features only one L-shaped control arm. Common independent suspensions in cars include multi-link suspension, double-wishbone suspension, double A-arm suspension, and double-ball-joint suspension. The middle part of an independent suspension is not connected. The MacPherson suspension consists of a coil spring, shock absorber, and triangular lower control arm. There are two types of suspensions in cars: independent suspension and non-independent suspension. The middle part of an independent suspension is not connected, so there is no interference between the two wheels on the same axle when using independent suspension. In contrast, the middle part of a non-independent suspension is connected, leading to interference between the two wheels on the same axle when using non-independent suspension.

6

4

Share

What kind of four-wheel drive does the Volkswagen Teramont use?

Volkswagen Teramont uses an on-demand four-wheel drive system. There are three types of four-wheel drive systems used in vehicles: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. The Volkswagen Teramont is an SUV produced by SAIC Volkswagen. In terms of appearance, the Teramont draws heavily on the design of the CrossBlue concept car, presenting a very imposing overall look. For details, the Teramont features a dual-slat chrome grille that extends into the headlights. The dimensions of the Volkswagen Teramont are 5039mm in length, 1989mm in width, and 1773mm in height, with a wheelbase of 2980mm. Its engine delivers a maximum horsepower of 186Ps, a maximum power of 137kW, and a maximum torque of 320Nm.

2

4

Share

How to solve the problem when a motorcycle has electricity but won't start?

When the motorcycle fails to start, you can simply check the circuit issues to see if the whole vehicle is powered. If there are no issues with the circuit, then check the fuel system to see if the fuel line is delivering fuel.

3

1

Share

What are the methods to identify retreaded tires?

You can determine whether a tire is retreaded by examining its tread pattern, color, hardness, and markings. Here are the specific details: Tread pattern: For tires of the same model, inferior counterfeit retreaded tires will have much shallower tread grooves due to non-standard processing. Observe whether the drainage grooves and tread patterns are even. If the tire has been retreaded improperly, there will be knife marks on the drainage grooves and tread patterns, and they will appear uneven. Color: Inferior retreaded tires tend to have a more vibrant and glossy appearance, while new tires produced by regular manufacturers will look relatively dull. Sidewall hardness: Press firmly on both sides of the tire. Inferior retreaded tires will feel softer and lack elasticity. Markings: New tires produced by regular manufacturers will have wear indicators such as TWI or small triangles on the outer side. Most counterfeit retreaded tires have markings that are simply pasted on by small workshops. Therefore, you can identify them by trying to peel off the markings with your fingers.

15

0

Share

What is the difference between 10w40 and 5w30?

How to Turn on the Fog Lights of the Roewe i5?

How to adjust the date on a Golf?

What does MacPherson independent suspension mean in cars?

What kind of four-wheel drive does the Volkswagen Teramont use?

How to solve the problem when a motorcycle has electricity but won't start?

What are the methods to identify retreaded tires?

What brand is the engine of the Volkswagen Lavida?

What are the new regulations for National IV motorcycles in 2021?

What is the process for obtaining a license plate in Shanghai?

How to Repair a Cracked Motorcycle Leather Seat?