What is the difference between 1.4t and 1.5l?

1 Answers
CassandraMarie
07/28/25 3:45pm
The differences between 1.4t and 1.5l: 1. Different forms: 1.4t is turbocharged, with strong power, higher price, and more expensive maintenance; 1.5l is naturally aspirated, with weaker power, lower price, and cheaper maintenance. 2. Different transmission consumption: 1.4t consumes more transmission when driving at low speeds in the city, resulting in relatively higher maintenance costs later; 1.5l has stable power and lower transmission consumption. Turbocharging is a technology that uses exhaust gas generated by internal combustion engine operation to drive an air compressor. Natural aspiration is a type of car intake, which is a form of atmospheric pressure pushing air into the combustion chamber without any supercharger.
Was this review help?
5
2
Share
More Forum Discussions

The Difference Between Electric Trunk and Sensor-Activated Trunk?

The difference between a sensor-activated trunk and an electric trunk lies in the way they are opened: A sensor-activated trunk is an additional feature built upon an electric trunk. Typically, a sensor switch is installed at the lower part of the vehicle's trunk. When the owner sweeps their foot past it, the trunk automatically pops open. This design eliminates the need for manual trunk opening, which is especially convenient when carrying heavy items, making it a very smart feature. An electric trunk is equipped with two axial drive rods inside, controlled by an electrical circuit. The owner can press a button inside the car or on the car key to open the trunk automatically. The trunk serves as a storage compartment for miscellaneous items in a car, enhancing life's convenience. Most vehicle models have the trunk at the rear, while some sports cars have it at the front. The opening mechanisms are largely similar. Inside the trunk, you can typically find emergency items such as a spare tire, a vehicle first aid kit, a toolkit, a warning triangle, a fire extinguisher, and an emergency fuel cap release cable. Methods for maintaining a car trunk: When cleaning, use a brush to remove dirt, including the edges and grooves of the trunk. After cleaning, treat any odors. Use separate bags to organize items systematically. Place a trunk mat to prevent dirt or liquids from entering and damaging the trunk's surface. It also helps keep items from sliding around, reducing the risk of contamination or damage.
15
5
Share

How often should the Kia K3 be serviced?

Spark plugs should be replaced every 20,000KM. Components such as brake fluid and transmission oil are inspection items. The Kia K3 should be serviced every 5,000 kilometers. Below is a detailed introduction to the vehicle maintenance items: Engine Oil and Oil Filter Replacement: This primarily involves maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the oil, ensuring the normal operation of the lubrication system. The oil filter should be replaced along with the oil during an oil change. Under normal circumstances, the car should be serviced every 5,000KM. Filter Element Replacement: The air filter element functions to filter air before it enters the cylinder, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter element depend on the usage environment. The gasoline filter element is generally replaced after driving 20,000-25,000KM. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000KM. Additionally, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during routine maintenance, with maintenance performed as needed based on usage conditions.
12
4
Share

Is a Dual-Clutch Transmission an Automatic Transmission?

Dual-clutch transmission is a manual transmission, not an automatic transmission. A dual-clutch transmission is a manual transmission equipped with automatic shifting technology. Strictly speaking, it belongs to both manual and automatic transmissions. Besides offering the flexibility of a manual transmission and the comfort of an automatic transmission, it also provides uninterrupted power output. The dual-clutch transmission, abbreviated as DCT, has two sets of clutches. The alternating operation of these two clutches achieves seamless gear shifting. Common dual-clutch transmissions include Volkswagen's DSG, Ford's Powershift, Mitsubishi's SST, and Porsche's PDK.
6
0
Share

What are the reasons for car brake failure?

Car brake failure is caused by worn and thinned brake pads or insufficient brake fluid, and continuing to drive under such conditions poses safety hazards. The braking system of a car is crucial for vehicle deceleration, as it technically ensures safe driving. New cars undergo a break-in period for the braking system during initial use, with the first 1,000 kilometers being the break-in period for new car brakes. It is recommended to avoid emergency braking during this time. Both brake pads and brake discs have a limited lifespan and must be replaced when worn beyond a certain point. The specific replacement interval depends on the vehicle's usage, but it is generally recommended to inspect them every 50,000 kilometers.
11
4
Share

What is an 8-speed automatic manual transmission?

An 8-speed automatic manual transmission refers to a car's transmission with 8 gear ratios. Below is an introduction to transmission-related content: 1. Multi-function switching: The transmission can switch between automatic and manual modes. When switched to manual mode, the 8th gear is the highest. 2. Function of the transmission: It changes the transmission ratio, expands the torque and speed of the driving wheels, allows the car to reverse, and facilitates gear shifting or power output. 3. Transmission maintenance methods: Replace the automatic transmission fluid every 12 months or 20,000 kilometers, avoid coasting in neutral, regularly check fluid levels, do not skip gears when upshifting, do not force the transmission into neutral, do not shorten the idle warm-up time, avoid gear grinding when shifting, and perform regular maintenance and cleaning of the automatic transmission.
4
4
Share

Haval M6 0-100 km/h Acceleration Time?

According to official data, the Haval M6's 0-100 km/h acceleration time is 12.96 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Haval Chulian has a maximum torque of 220 Nm and a 0-100 km/h acceleration time of 10.37 seconds; the Haval M6's 1.5T turbocharged engine delivers 150 horsepower and a maximum torque of 210 Nm, with a 0-100 km/h acceleration time of 12.96 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Haval M6 is equipped with a 6-speed manual transmission (MT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Haval Chulian has a power-to-weight ratio of 112 Hp/T and a 0-100 km/h acceleration time of 10.37 seconds; the Haval M6 has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 12.96 seconds.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.