What is the diameter of the MG6 OEM brake disc?

What Causes High Oil Pressure?

The causes of high oil pressure include the following: 1. Insufficient engine oil storage, leading to inadequate lubrication and low oil pressure. Solution: Add oil. 2. Dirty or viscous oil prevents the oil pump from effectively drawing or pumping oil, resulting in low or no oil pressure. Solution: Change the oil. 3. Thin oil or oil thinning due to high engine temperature can leak through engine friction gaps, causing low oil pressure. Solution: Change the oil or inspect the cooling system. 4. Oil pipe leaks, oil pump damage, or excessive wear of components reduce oil intake and output, leading to low or no oil pressure. Solution: Inspect and repair. 5. Excessive clearance between the crankshaft and bearings causes oil leakage and low oil pressure. Solution: Inspect and repair. 6. A malfunctioning pressure relief valve due to weak or stuck springs or damaged steel balls reduces oil pressure. Solution: Inspect, repair, or replace. 7. Faulty oil sensor, pressure gauge, or electrical issues result in low oil pressure. Solution: Inspect, repair, or replace.

12

5

Share

What Material Are Car Bumpers Made Of?

Car bumpers are made of plastic. The bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. It consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets (approximately 1.5 mm thick) into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle frame's longitudinal beams with screws, allowing for easy removal when needed. Methods for repairing bumper scratches include: 1. Applying toothpaste to shallow scratches and wiping gently with a soft cloth in a counterclockwise motion; 2. Spraying automotive scratch repair agent onto the scratches and wiping with a towel; 3. Using a touch-up pen to spray and fill the damaged area along the direction of the scratch, then applying fine wax after it dries.

5

0

Share

What Causes the Clutch Pedal to Be Hard to Press?

Possible reasons why a car's clutch pedal becomes hard to press include: the clutch cable being stuck, failure or damage to the clutch release bearing, or air entering the clutch slave cylinder. Solutions for a stiff clutch pedal: When the clutch cable is stuck and the pedal cannot be pressed, the driver should adjust the seat to find a comfortable pedal position, locate the clutch assembly, loosen the adjustment knob on the clutch, rotate the clutch control rod to adjust it to the proper position, then retighten the nut. If the clutch still cannot be pressed, the issue may be a faulty clutch release bearing or air in the slave cylinder. In such cases, the vehicle should be towed to a professional repair facility for clutch servicing. How a car clutch works: The primary function of the clutch is to engage and disengage the engine from the transmission, thereby controlling power transfer from the engine to the gearbox. The clutch is typically used when starting the vehicle or during gear shifts. It is normally located in the flywheel housing between the engine and transmission. Therefore, the manual transmission clutch significantly impacts the vehicle's safe and efficient operation.

5

1

Share

Can I Change Driving Schools After Passing Subject 1? Will the Score Be Retained?

You can change driving schools after passing Subject 1, and the test score can be retained, but you need to negotiate with the original driving school to help transfer the valid score for Subject 1. In principle, as long as you signed a contract when registering, the training fee issue can be handled according to the contract. Unused fees can be refunded. For incurred exam fees, administrative fees, or training fees, these will be deducted from the paid amount, and a certain penalty may also be deducted before the remaining money is refunded to the student. Since there are no clear legal regulations regarding driving school refunds and fee standards vary among schools, it is advisable to sign a relevant contract when enrolling and keep all receipts. If a refund is needed, first negotiate with the driving school. If no agreement is reached, you can call 12328 to file a complaint or report to the transportation bureau's operation management department, which oversees driving schools.

15

3

Share

How to open the fuel tank cap of the Borgward BX5?

The methods to open the fuel tank cap of the Borgward BX5 are: 1. Press method, the driver only needs to turn off the car and park it, and the fuel attendant can directly press the fuel tank cap to open it, which is very convenient; 2. Use a mechanical key to open, this type of fuel tank cap switch is now relatively rare, because it is more troublesome to use, requiring the driver to get out of the car and use the key to open it; 3. Open with the in-car switch button, the in-car switch has a fuel pump-like logo, press it to open. The Borgward BX5 is a compact SUV mainly targeting young consumers, with a length, width, and height of 4490 mm, 1877 mm, and 1675 mm respectively, and a wheelbase of 2685 mm. In terms of appearance, the Borgward BX5 is mainly youthful and dynamic, with a tension-filled front design and a fastback-style rear, further amplifying the dynamic elements of the vehicle.

3

0

Share

What is the fuel consumption of Hyundai Verna?

Comprehensive fuel consumption: 6.10L/100km, urban fuel consumption: 8.10L/100km, suburban fuel consumption: 4.90L/100km. Related introduction is as follows: 1. Body size: Hyundai Verna has an exterior size comparable to an A-class car, with length, width, and height reaching 4340mm, 1700mm, and 1460mm respectively, coupled with a 2570mm wheelbase, making Verna superior in size to most A0-class sedans. The Verna uses a large number of smooth texture lines in its exterior design, paired with a fashionable front face, creating a cutting-edge and dynamic visual experience. 2. Power: The all-aluminum cylinder block material effectively reduces the engine weight, and the CVVT continuous variable valve timing system ensures stable combustion at idle speed. The maximum power reaches 78.7Kw and 90.4Kw, and the maximum torque is 135.4Nm and 155Nm.

11

2

Share

What is the diameter of the MG6 OEM brake disc?

What Causes High Oil Pressure?

What Material Are Car Bumpers Made Of?

What Causes the Clutch Pedal to Be Hard to Press?

Can I Change Driving Schools After Passing Subject 1? Will the Score Be Retained?

How to open the fuel tank cap of the Borgward BX5?

What is the fuel consumption of Hyundai Verna?

How to Deal with the Illuminated ESP Warning Light in the Engine?

Is it safe to add engine anti-wear agents to engine oil?

What brand is the triangular car?

Can Sinopec gasoline be mixed with fuel from private gas stations?