What is the DFSK car logo?

What to Do If the Thermostat Has a Slight Water Leak?

The cause of a thermostat water leak is generally due to a damaged base, which requires replacing with a new one. Below is more relevant information: 1. The function of a car thermostat is to prevent the engine from becoming too cold. For example, after the engine is operating normally, when driving at high speeds in winter, without a thermostat, the engine temperature might drop too low. In this case, the engine needs to temporarily halt the water circulation to ensure the temperature does not become excessively low. 2. The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the water circulation range to regulate the cooling system's capacity, ensuring the engine operates within an appropriate temperature range. 3. The thermostat must maintain good technical condition; otherwise, it can severely affect the engine's normal operation. If the thermostat's main valve opens too late, it can cause the engine to overheat; if the main valve opens too early, it prolongs the engine's warm-up time, resulting in the engine temperature being too low.

16

4

Share

What Causes the Clicking Sound When Reversing a Car?

The clicking sound during reversing is a normal backlash noise and is not an indication of a vehicle malfunction. Here are the detailed explanations: 1. Since the brake pads are mounted on the brake caliper bracket, under normal conditions, the brake pads are tightly fitted against the forward-facing end of the bracket with no backlash gap. Therefore, no abnormal noise occurs when braking while moving forward. However, when reversing, the vehicle moves in the opposite direction, and there is a certain backlash gap between the brake pads and the rear end of the bracket. As a result, during braking, the brake pads will impact the rear end of the bracket, producing a clicking noise. There is no need to worry excessively, as this is a normal phenomenon. 2. Applying a thin layer of lubricant to the contact points between the brake pads and the brake caliper bracket can help mitigate this issue to some extent. However, it is important to note: Do not apply lubricant to the friction surface of the brake pads or the brake disc, as this could negatively affect braking performance.

13

0

Share

How Many Cylinders Does the 2021 Cavalier Have?

The 2021 Cavalier is a three-cylinder model. Below is a related introduction to the 2021 Cavalier: 1. In terms of appearance, the front fascia features a large air intake grille, which has been blacked out, giving it a very sporty feel that aligns with the aesthetic standards of young people. 2. In terms of power, the new car still comes equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125 hp and a peak torque of 180 Nm, paired with a 6AT transmission. 3. In terms of configuration, the entry-level model has been upgraded with 15-inch wheels, making the overall appearance more harmonious. Additionally, the mid-range model now includes leather seats and a leather-wrapped steering wheel, further enhancing the sense of luxury; the top-end model has been upgraded with Redline black leather interior.

10

1

Share

Is there a difference between front and rear license plates?

Whether license plates are divided into front and rear depends on the type of vehicle. For passenger cars, there is no distinction between front and rear license plates. However, for buses and trucks, there is a difference—usually, a smaller plate is mounted at the front and a larger one at the rear. Here are specific details about license plates: 1. Remember to secure the license plate with four fastening screws. Incorrectly mounted plates can result in a 12-point penalty. When registering a new vehicle, ensure the dealership installs all four screws. If you receive the plates yourself, check if there are eight screws in total. If not, you must obtain the missing ones. According to traffic regulations, vehicles with four holes (two front and two rear) require four screws, while those with eight holes (four front and four rear) need eight screws. Installing too many or too few screws can lead to penalties. Additionally, only approved parts should be used for mounting. Using unauthorized substitutes, such as rivets, if screws are lost, is also non-compliant. 2. The most common license plates on the road are blue with white characters, typically used for standard passenger cars. Most cars use this type of plate unless they are automatic transmission vehicles, which require a C2 license. Otherwise, vehicles with this color plate can generally be driven with a standard license.

20

3

Share

How to Deal with Slight Air Leakage in the Intake Manifold?

When an air leakage occurs in the intake manifold, it should be promptly inspected at a repair shop to identify the leakage location. Below are the specific impacts of an intake manifold air leakage: 1. If the intake manifold has an air leakage, it can result in high idle speed, weak acceleration, and in severe cases, the engine may fail to start. The intake manifold is a pipe in the intake system that distributes air to each cylinder. The inner wall of the intake manifold is generally smooth to reduce resistance. 2. Under normal conditions, the engine's air intake is fixed. When the intake manifold leaks, it can cause insufficient air intake, preventing the perfect mixture of fuel and air, leading to insufficient engine power. Hence, weak acceleration may occur during driving. Additionally, intake manifold leakage can cause abnormal engine operation, resulting in engine stalling, and the exhaust pipe noise may also increase.

7

4

Share

How to Reset the Maintenance Light on Toyota Levin?

Levin maintenance light reset steps are as follows: 1. First, make sure the Levin is in ON mode. 2. Press and hold the maintenance light reset button, then rotate it until the trip meter A appears. 3. Turn off the ignition switch, i.e., OFF mode. 4. While holding and rotating the maintenance light reset button, turn the ignition switch back to ON mode. Continue holding and rotating the reset button until the mileage is cleared. After 5 seconds, trip meter A will display "000000", indicating the maintenance light has been successfully reset. More related information: 1. The Levin's maintenance indicator light is designed to remind the owner when it's time for maintenance after the vehicle has been driven a certain mileage. In other words, when this light stays on for a long time, it's time to take the car to a 4S shop for maintenance. After maintenance, the technicians at the 4S shop will use a car computer diagnostic tool to reset the maintenance light. If not reset, the indicator light will remain on even after maintenance is performed. 2. It's important to note that before the car undergoes maintenance, do not reset the maintenance light just because it stays on. Doing so will result in incorrect accumulated maintenance mileage, and the maintenance light will lose its function of reminding you of maintenance. After maintenance, to ensure the reminder function of the light, it must be reset.

1

Share

What is the DFSK car logo?

What to Do If the Thermostat Has a Slight Water Leak?

What Causes the Clicking Sound When Reversing a Car?

How Many Cylinders Does the 2021 Cavalier Have?

Is there a difference between front and rear license plates?

How to Deal with Slight Air Leakage in the Intake Manifold?

How to Reset the Maintenance Light on Toyota Levin?

Are There Age Restrictions for Applying for a Driver's License?

Is Brake Maintenance Necessary?

What does 'scan' mean on a car?

What are the meanings of several common light signals?