What is the detailed explanation of the button icons for the 2020 Highlander?

Can the Turn Signal Be Activated in Advance for Subject 3?

No, it cannot be activated in advance. In the Subject 3 driving test, failure to use the turn signal correctly will result in an automatic disqualification by the computer. Activating the turn signal in the correct direction in advance is not only a responsible action for your own safety but also for the safety of others' lives and property. For Subject 3, the use of turn signals must be noted in the following aspects: starting, turning, making a U-turn, overtaking, changing lanes, and parking. There are two methods for starting: one is to first activate the left turn signal, then press the clutch and shift to first gear; the other is to press the clutch, shift to first gear, and then activate the left turn signal. The turn signal should not be activated last, as this may result in the turn signal not being maintained for at least 3 seconds. The test explicitly states that failing to maintain the turn signal for at least 3 seconds during starting will result in disqualification. Subject 3 includes left and right turns as two test items. Regardless of the direction of the turn, the turn signal must not be forgotten. It is advisable to activate the corresponding turn signal immediately after the voice announcement for the subject and ensure it does not turn off during the turn, maintaining it for at least 3 seconds. If the turn signal turns off midway, it should be reactivated promptly. It is recommended to activate the turn signal early, as this not only alerts vehicles and pedestrians in advance but also prevents forgetting to activate it later due to busy hands and feet. The U-turn item is similar to turning and other assessment items. After the voice announcement, first activate the left turn signal, maintain it for at least 3 seconds, and then perform other actions to avoid being too late or forgetting to activate the turn signal. Activating the turn signal before overtaking is crucial. Forgetting to do so is considered improper operation and can easily lead to accidents. During Subject 3, the turn signal should be activated immediately after the voice announcement, ensuring it is maintained for at least 3 seconds. Additionally, do not forget to honk the horn, check the rearview mirror, and look back for safety observations. After completing the overtaking and changing to the left lane, immediately activate the right turn signal, maintain it for 3 seconds, and then return to the original lane to complete the overtaking item. Similar to overtaking, the turn signal is also very important when changing lanes. The operation is the same as overtaking, except there is no need to return to the original lane. Overtaking can be viewed as two lane changes. When the voice announcement instructs to pull over, first activate the right turn signal and maintain it for at least 3 seconds before performing other actions.

1

0

Share

At What Water Level Will a BMW Get Damaged?

BMWs will start having problems if the water level rises above the tires. Introduction to Flood-Damaged Vehicles: After a vehicle has been submerged in water, it is difficult to dry out the water inside the seats and floorboards. When the vehicle is exposed to sunlight, the high temperature can turn the interior into a steamer-like environment, causing large amounts of moisture to corrode electronic components through the floor and other areas. Hazards of Flood-Damaged Vehicles: Areas that have been submerged in water are prone to short circuits and may even lead to severe damage to the car. The various negative effects on the car's components are most directly reflected in the engine and electronic devices. Shortly after being submerged, the vehicle may appear to function without issues, but after two or three months, unexplained faults may start to appear one after another.

5

1

Share

What does the exclamation mark on the Haval H6 dashboard indicate?

An exclamation mark appearing on the car dashboard can indicate one of five possible issues: general faults, automatic transmission faults, braking system faults, abnormal tire pressure, or lighting faults. Below is a detailed analysis of these five scenarios: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Faults: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or insufficient transmission fluid. The transmission fluid should be replaced promptly. Braking System Faults: A circle with parentheses and an exclamation mark in the middle represents a braking system warning, typically signaling a braking system malfunction or low brake fluid level. Immediate inspection and repair of the braking system are necessary to prevent accidents. Abnormal Tire Pressure: A horizontal line with parentheses below and an exclamation mark in the middle is the tire pressure monitoring warning light. It illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Faults: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.

3

2

Share

In which country is Lynk & Co produced?

Lynk & Co is produced by China's Geely Auto and is a result of joint technological development between Geely Auto and Volvo Cars. LYNK&CO is a brand established by the Geely Group. Through a series of European-style designs, it still retains Chinese elements. Here is an introduction about Lynk & Co under the Geely Group: 1. The exterior, designed by a top-tier team to appeal to young people, features an advanced in-car internet system and highly efficient power capabilities that effectively enhance energy usage while delivering strong performance. 2. Lynk & Co's marketing consistently highlights terms such as "European R&D and production," "Volvo technology," and "foreign design team," as it is a product of the joint venture between Geely and Volvo.

2

5

Share

What cars are produced at Volkswagen's third plant?

Models produced at Volkswagen's third plant: The first plant produces Audi A4L, A6L, and Q5; Volkswagen: Jetta and New Bora. The second plant produces Volkswagen models, New Bora, Sagitar, Magotan, Golf A6, and CC. The third plant produces Jetta. Introduction to Volkswagen: FAW-Volkswagen Automobile Co., Ltd. was established on February 6, 1991. It is a large passenger car manufacturing enterprise jointly operated by China FAW Group Corporation, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. It is China's first modern passenger car manufacturer to start construction based on economic scale. Business scale: FAW-Volkswagen mainly produces two major brands under the Volkswagen Group: Volkswagen and Audi. The Volkswagen brand products include: Jetta, Bora, CC, Golf, Sagitar, Magotan. The Audi brand products include: Audi A3, Audi A4L, Audi Q3, Audi Q5, Audi A6L, and other series models.

14

3

Share

Why Are Bumpers Made of Plastic?

Reasons for plastic bumpers: 1. Safety considerations. Modern automotive safety standards not only protect vehicle occupants but also pedestrians in the event of a collision. Due to their material properties, plastic bumpers are more elastic and better at absorbing impact forces compared to metal. 2. Cost reduction. Since the vehicle body structure already uses high-strength materials, many components, including bumpers, are made of engineering plastics, which significantly reduces costs. 3. Metal is prone to rust. Metal easily rusts when exposed to water and air. As bumpers are frequently damaged during daily driving, metal bumpers are more susceptible to corrosion and rust, affecting their appearance.

8

1

Share

What is the detailed explanation of the button icons for the 2020 Highlander?

Can the Turn Signal Be Activated in Advance for Subject 3?

At What Water Level Will a BMW Get Damaged?

What does the exclamation mark on the Haval H6 dashboard indicate?

In which country is Lynk & Co produced?

What cars are produced at Volkswagen's third plant?

Why Are Bumpers Made of Plastic?

Why can't the sunroof of Jetour X70 Plus be opened?

What is the wheel size of the Mercedes-Benz CLA220?

What is BMW's Gesture Control?

What is the ground clearance of the MG ZS?