What is the detailed explanation of FAW Toyota M20D engine?

What brand is the WEY engine?

WEY engines belong to the Chinese luxury SUV brand WEY. The model 4C20NT is jointly developed by Great Wall and Delphi. Taking the 2021 WEY VV7 Technology Edition as an example, it is a midsize SUV with body dimensions of 4760mm in length, 1931mm in width, and 1655mm in height, a wheelbase of 2950mm, and a minimum ground clearance of 211mm. The 2021 WEY VV7 Technology Edition is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 227PS, a maximum power of 187kW, and a maximum torque of 387Nm, paired with a 7-speed dual-clutch transmission.

15

1

Share

How many seats does the Subaru BRZ have?

Subaru BRZ is a two-door, four-seater sports car. Other models under its brand include: Forester, Outback, Legacy, Subaru VX, Forester, etc. Taking the Subaru VX as an example, its body dimensions are: 4240mm in length, 1775mm in width, and 1320mm in height, with a wheelbase of 2570mm. The front suspension is MacPherson independent suspension, and the rear suspension is double-wishbone independent suspension. The Subaru VX is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 200PS, a maximum power of 147kW, and a maximum torque of 205Nm, paired with a 6-speed manual transmission.

1

Share

What is the Difference Between Horsepower and Torque?

The difference between horsepower and torque lies in their respective meanings: Horsepower is a unit commonly used in engineering to measure power, representing the physical quantity that determines a car's top speed. A car with higher horsepower will have a higher top speed and greater maximum velocity. Torque, on the other hand, is a manifestation of engine power, referring to the force that twists an object and causes it to deform. It is the moment generated when an object is subjected to a tangential force in the direction of rotation. Greater torque results in stronger instantaneous acceleration. Taking commercial vehicles as an example, they typically have higher torque output values, providing strong instantaneous acceleration in low RPM ranges, but their horsepower output is relatively low, resulting in a lower top speed.

18

1

Share

Which country is the Maserati car brand from?

Maserati is an Italian brand, and its models include the Maserati GT, Quattroporte, Ghibli, and Levante, among others. Taking the 2021 standard version Maserati Quattroporte as an example, its body dimensions are: length 5262mm, width 1948mm, height 1481mm, with a wheelbase of 3171mm. The 2021 standard version Maserati Quattroporte features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L twin-turbocharged engine, delivering a maximum horsepower of 350ps, a maximum power of 2570kw, and a maximum torque of 500nm, paired with an 8-speed automatic transmission.

14

1

Share

How many modes does the Outlander 4WD have?

The Outlander 4WD has 3 modes, which are eco, auto, and lock. There is a 4WD lock lever behind the handbrake; lift it up, and the dashboard indicator light will turn on for use. Taking the 2020 Outlander 2WD Comfort Edition as an example, its body dimensions are: length 4705mm, width 1810mm, height 1710mm, with a wheelbase of 2670mm. The 2020 Outlander 2WD Comfort Edition is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 166ps, maximum power of 122kw, maximum torque of 201nm, and is paired with a continuously variable transmission.

11

5

Share

What Causes the ABS Light to Illuminate in a Volkswagen Golf?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control module from determining the vehicle speed or the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or faulty ABS relay contacts, leading to system malfunction. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and voltage rises, the ABS light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains illuminated after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connector contact of the ABS hydraulic valve body; ABS control module failure. Solution: Loosen and retighten the hydraulic valve body's grounding screw, cleaning the contact surface if necessary; check for enlarged connector gaps; replace the ABS or ABS/ASR control module. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control module detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

4

0

Share

What is the detailed explanation of FAW Toyota M20D engine?

What brand is the WEY engine?

How many seats does the Subaru BRZ have?

What is the Difference Between Horsepower and Torque?

Which country is the Maserati car brand from?

How many modes does the Outlander 4WD have?

What Causes the ABS Light to Illuminate in a Volkswagen Golf?

What are the differences between the Leiling Luxury Edition and Sport Edition?

Where is the battery of the Audi Q5 located?

How to reset the tire pressure monitoring system on Honda CRV?

Where is the cruise control on the Volkswagen Lavida?