What is the curb weight of the Oshan X7 in tons?

2 Answers
HenryMarie
07/24/25 6:08pm
Oshan X7 has a curb weight ranging from 1.9 to 2.075 tons. Positioned as a compact SUV, the Oshan X7 measures 4705mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2780mm. In terms of powertrain, this vehicle is equipped with a 1.5TGDI engine, delivering a maximum power of 131 kW and a peak torque of 265 N·m. It is paired with a wet-type 7DCT automatic transmission. Regarding features, the car comes with the Oshan Intelligent Connectivity System, an intelligent vehicle chip, a remote video system, ultra-HD 360-degree panoramic imaging, an ultra-HD surround-view driving recorder, and a fully automatic parking system, among other configurations.
Was this review help?
14
2
Share
JuliaLynn
08/11/25 10:06am
The curb weight of the Oshan X7 typically ranges between 1.5 to 1.6 tons, with the exact figure depending on the configuration version you purchase. For instance, the base model might be slightly lighter, while the higher-end versions could weigh a bit more due to additions like a sunroof or larger wheels. Having driven this car multiple times, I've noticed that the extra weight provides better stability at high speeds and reduces body roll during turns, though it does have a slight impact on fuel consumption—expect slightly higher fuel costs for daily urban commuting. I recommend checking the vehicle manual or consulting the 4S dealership for precise information rather than relying solely on online data, as actual usage with frequent full loads of passengers and luggage will make the weight's effect on fuel economy more noticeable. Additionally, consider your personal needs: if you live in a mountainous area, the extra weight can offer better uphill performance, but remember to check tire pressure for optimal performance during long trips.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Should You Depress the Clutch When Braking to Slow Down?

Yes, emergency braking without depressing the clutch may have the following potential impacts, with explanations as follows: 1. ABS Affected: Without depressing the clutch, the engine's drag torque may interfere with the normal operation of the ABS system, potentially affecting control in extreme cases. 2. Engine Stall: Braking without depressing the clutch can cause the engine to stall. Although the braking distance remains unchanged, there is still a risk of secondary accidents after coming to a stop, which is also a safety hazard. 3. Possible Misoperation: In emergency situations, people are highly stressed, especially those with poor mechanical operation skills. In a panic, they may misoperate the pedals. If both the brake and clutch are depressed simultaneously, even accidentally pressing the accelerator will not affect the braking effectiveness.
18
4
Share

What is the weight of the Beijing BJ40 body?

The body weight of the Beijing BJ40 is 2110kg. Below is relevant information about the 2021 2.0D automatic four-wheel drive Blade Hero Pioneer Edition Beijing BJ40: 1. Powertrain: Equipped with a 2.0L turbocharged 4-cylinder engine, paired with an 8-speed automatic manual transmission. 2. Body dimensions: Length, width, and height are 4630mm, 1925mm, and 1871mm respectively. The wheelbase is 2745mm. 3. Chassis: The drive system is front-engine four-wheel drive, with front suspension being double-wishbone coil spring independent suspension, and rear suspension being five-link coil spring non-independent suspension.
13
5
Share

What is the reason for the failure of the Bora's driver-side window button?

The reason for the failure of the Bora's driver-side window button may be that the copper sheet on the button circuit board has flattened and lost elasticity due to long-term external pressure, leading to malfunction. Here is the relevant introduction about the 2021 Bora 200TSI DSG Comfort Intelligent Connect Edition: 1. Powertrain: Equipped with a 1.2L turbocharged 4-cylinder EA211-DLS engine, paired with a 7-speed dry dual-clutch transmission. 2. Body dimensions: The length, width, and height are 4663mm, 1815mm, and 1462mm respectively. The wheelbase is 2688mm. 3. Chassis: The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
12
0
Share

What Are the Causes of Excessive Water Temperature in Diesel Engines?

The causes of excessive water temperature in diesel engines are as follows: 1. Improper selection of coolant or insufficient water volume: Diesel engines used in construction machinery generally operate at higher temperatures. Adding antifreeze can ensure a high boiling point and reduce the formation of scale in the cooling system. If air is not expelled from the cooling system or coolant is not replenished in time, the cooling performance will decline, leading to an increase in coolant temperature. 2. Blockage of the water radiator: When the surface of the water radiator is contaminated with engine oil, the mixture of dust and oil sludge formed has a lower thermal conductivity than scale, severely hindering the heat dissipation effect. 3. Faulty water temperature gauge or warning light: This includes damage to the water temperature sensor, grounding of the circuit, or malfunction of the indicator causing false alarms. In this case, a surface thermometer can be used to measure the temperature at the water temperature sensor to observe whether the water temperature gauge (warning light) indication matches the actual temperature.
4
1
Share

What does 2rs bearing mean?

2rs represents the sealing method of the bearing. The basic dimensions of the bearings are the same. rs represents rubber seal. 2rs means double-sided rubber seal. Additional information: 1. Function: To compare the load capacity of bearings against pitting, the rated life of a bearing is defined as the maximum load it can withstand when its rated life reaches one million revolutions (106). That is, under the rated dynamic load C, the bearing has a 90% reliability of operating for one million revolutions (106) without pitting failure. The higher the C value, the greater the load capacity. 2. Differences: Due to variations in manufacturing precision and material uniformity, even bearings of the same material and size from the same batch may have different lifespans under identical working conditions. If the statistical lifespan is taken as 1 unit, the longest relative lifespan is 4 units, and the shortest is 0.1-0.2 units. The ratio between the longest and shortest lifespans is 20-40 times. The number of revolutions or hours that 90% of bearings can endure without pitting is called the rated life of the bearing.
20
4
Share

What is the reason why the Porsche horn does not rebound after being pressed?

The reason why the Porsche horn does not rebound after being pressed may be due to foreign objects causing jamming at the horn. Below is an introduction to the 2021 Turbo GT Porsche Cayenne: 1. Powertrain: Equipped with a 4.0L twin-turbocharged V8 engine and an 8-speed automatic manual transmission. 2. Body dimensions: Length, width, and height are 4942mm, 1995mm, and 1636mm respectively. The wheelbase is 2895mm. 3. Chassis: The drivetrain is front-engine four-wheel drive, with a multi-link independent front suspension and a multi-link independent rear suspension, featuring a unibody structure.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.