What is the curb weight of the new BMW 3 Series?

Is the Lexus IS Rear-Wheel Drive?

The Lexus IS is a rear-wheel-drive vehicle. Below is an introduction to the Lexus IS: 1. The Lexus IS is a mid-size sedan under the Lexus brand. Its dimensions are 4,680 mm in length, 1,810 mm in width, and 1,430 mm in height, with a wheelbase of 2,800 mm. The Lexus IS is equipped with a 2.0-liter turbocharged engine, model code 8AR-FTS, which delivers a maximum power of 180 kW at 5,800 rpm and a peak torque of 350 Nm between 1,650 and 4,400 rpm. 2. The engine features VVT-i technology and a hybrid injection system, along with an aluminum alloy cylinder head and block to reduce weight, enhancing both handling and fuel efficiency. 3. This engine is paired with an 8-speed automatic transmission (8AT), improving gearshift smoothness and fuel economy. 4. The Lexus IS uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone setup helps reduce body roll and brake dive, consisting of upper and lower control arms connected by a linkage. The multi-link suspension replaces the control arms of the double-wishbone with individual links.

11

0

Share

Which transmission has a lower failure rate, DCT or CVT?

CVT transmissions have a lower failure rate. Additional details are as follows: 1. Precautions: Since all control of the CVT is achieved through internal hydraulic pressure, it is essential to check the quality and quantity of the CVT fluid according to the intervals specified by the manufacturer and regularly replace it with the fluid that meets the manufacturer's requirements. If related components or circuits malfunction, a special reset procedure is required for the CVT to function properly. Therefore, repairs for CVT transmissions should be conducted at professional service centers. 2. Automatic mode of the transmission: It is not recommended for drivers to coast in neutral (N) gear. While driving, do not shift the gear lever to N. To maximize fuel efficiency, it is best to use the automatic mode of the CVT transmission. When going downhill, it is advisable to use S gear or the lower gears in manual mode to utilize engine braking, avoiding prolonged braking that could lead to thermal degradation of the brake pads and reduced braking performance.

13

3

Share

What is the actual fuel consumption of the BMW 3 Series 325li?

The BMW 3 Series 325li has a fuel consumption of approximately 9.3 liters per 100 kilometers. The BMW 325 is equipped with a low-power version of a 2.0-liter turbocharged engine. This engine delivers 184 horsepower and 300 Nm of torque, with maximum power output achieved between 5,000 and 6,000 rpm, and maximum torque available from 1,350 to 4,000 rpm. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in standardized tests under constant-speed driving conditions for certain types of vehicles. 2. Testing methods: Tests can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then calculated using the "flow meter method" or the "carbon balance method."

15

4

Share

What is Vehicle Mileage?

Here is relevant information about vehicle mileage: 1. The concept of mileage: Vehicle mileage refers to the distance a car has traveled. It shows how many kilometers the vehicle has covered since it left the factory. The odometer in a car includes two rolling counters driven by the same flexible shaft, which respectively record the trip mileage and the total mileage. The trip mileage usually has four digits for short-term counting and can be reset to zero; the total mileage has six digits and cannot be reset. 2. The role of mileage for vehicles: Vehicle mileage is also a standard for measuring the depreciation rate of a car. Many car owners tamper with the odometer numbers when selling their vehicles, engaging in deceptive practices to inflate the selling price. For car buyers, the current condition, age, brand, performance, and degree of wear and tear are all pricing criteria, as well as the most important standards for judging whether a vehicle is good or bad. In principle, the lower the number on the odometer, the higher the vehicle's price. Therefore, the number on the odometer is not the sole standard for judging the quality of a vehicle.

19

5

Share

Which manufacturer produces Roewe?

Roewe is an automobile brand under Shanghai Automotive Industry Corporation (Group), launched in October 2006. The technology for this brand's vehicles originates from Rover, which was previously acquired by SAIC, though the 'Rover' brand itself was not acquired. On October 12, 2006, SAIC Motor Corporation Limited (hereinafter referred to as 'SAIC Motor') officially announced that its self-owned brand would be named 'Roewe', meaning 'glory of innovation and prestige worldwide'. Below is relevant information about Roewe: 1. Roewe's positioning: 'Roewe' products will be positioned as mid-to-high-end models in different market segments, targeting consumers who are knowledgeable, cultivated, successful in their careers, innovative, proactive, and pursuing taste. 2. Creating meaningful brand experiences for consumers: The 'Roewe' brand aims to provide consumers with a unique, confident, progressive, and meaningful brand experience. Meanwhile, SAIC also strives to convey 'taste, technology, and realization' through products and services like the Roewe 750, Roewe 550, Roewe 350, and other subsequent models.

18

5

Share

How often should the spark plugs of Baojun 730 be replaced?

Baojun 730 spark plug replacement cycle: Under normal maintenance conditions, replacement is required after driving 40,000 to 60,000 kilometers. However, due to differences in brands and engines, it is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it breaks down the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.

2

0

Share

What is the curb weight of the new BMW 3 Series?

Is the Lexus IS Rear-Wheel Drive?

Which transmission has a lower failure rate, DCT or CVT?

What is the actual fuel consumption of the BMW 3 Series 325li?

What is Vehicle Mileage?

Which manufacturer produces Roewe?

How often should the spark plugs of Baojun 730 be replaced?

What is the engine model of the Volkswagen Touran?

What type of oil does the Audi A3 use?

Should I Use Recirculation or Fresh Air Mode When Running AC in Summer?

Why is the Tayron positioned as a mid-size car?