What is the curb weight of the Haval Chitu?

1 Answers
McRyan
07/29/25 4:28pm
Haval Big Dog has a curb weight of 1545kg and 1575kg. The following is the relevant introduction of Haval Big Dog: Dimensions: The length of Haval Big Dog is 4620mm, the width is 1890mm or 1910mm, the height is 1780mm, and the wheelbase is 2738mm. Power: Equipped with a 1.5T-L4 turbocharged engine, the engine model is GW4B15A, with a maximum horsepower of 169PS, maximum power of 124kW, maximum power speed of 5000-5600rpm, maximum torque of 285N·m, maximum torque speed of 1400-3000rpm, matched with a 7-speed dual-clutch transmission. The drive method is front-wheel drive, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
Was this review help?
4
4
Share
More Forum Discussions

What is the wheelbase of the Karry K50?

The wheelbase of the Karry K50 is 2755 millimeters. The dimensions of this vehicle are 4501 millimeters in length, 1760 millimeters in width, and 1790 millimeters in height. The Karry K50 is an MPV model, and it is equipped with a 1.5-liter naturally aspirated engine across the entire lineup. The 1.5-liter naturally aspirated engine of the Karry K50 delivers a maximum power of 80 kilowatts and a maximum torque of 140 Newton-meters. The front suspension of the Karry K50 uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The torsion beam suspension is a relatively simple non-independent suspension structure, characterized by its compact size and minimal space occupation. Using a torsion beam suspension at the rear can expand the rear seating space and trunk space.
14
1
Share

What does National IV refer to?

National IV refers to China 4. Below is the relevant introduction to the China 4 standard: 1. The National Fourth Stage Motor Vehicle Pollutant Emission Standard, abbreviated as the "China 4 Emission Standard" or "National IV Standard," has relatively looser emission limits for in-use vehicles compared to new vehicles under the China 4 standard. However, it is still 34% stricter than the limits of the China 3 standard. In Beijing, National IV vehicles are initially inspected every two years, and some National IV vehicles are gradually starting to undergo annual inspections. During these inspections, the vehicle's emissions must meet the published standard limits; otherwise, maintenance is required, and the vehicle must pass the inspection to be cleared. 2. The China 4 emission standard was implemented starting in 2011 and remained in effect until 2018 when the China 5 standard was introduced. The China 4 standard requires that the emission levels of various pollutants be approximately 50% lower than those of the China 3 standard.
1
2
Share

How to Adjust the Height of the Steering Wheel?

There is a locking lever under the driver's steering wheel. Pull the locking lever upward, adjust it to the appropriate height, and then firmly press the locking lever to lock the steering wheel. Below is some additional information: 1. The earliest cars used a tiller for steering. This transmitted severe vibrations generated during driving to the driver, making it difficult to control the direction. After the engine was relocated to the front of the vehicle, the increased weight made it impossible for the driver to steer using the tiller. The new design of the steering wheel emerged to address this issue. It introduced a gear system between the driver and the wheels, offering flexible operation and effectively isolating severe vibrations from the road. 2. The steering wheel is connected to the steering shaft via splines. Its function is to convert the force applied by the driver into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required by the driver when turning. The steering intermediate shaft serves as a connector between the steering gear and the steering shaft, facilitating the standardization of the steering gear. It compensates for errors during manufacturing and installation, making the installation of the steering gear and steering wheel more reasonable in the vehicle.
17
3
Share

What is the Appropriate Height for Adjusting Car Seats?

Car seat height adjustment should be determined based on the driver's body size. The appropriate height varies depending on the driver's physique. Here are the specific steps for adjusting car seats: 1. Adjust the seat's fore-aft distance: Set the distance between the seat and the steering wheel to a comfortable position where your knees are slightly bent, allowing you to easily press the accelerator and brake pedals. 2. Adjust the seat height: Adjust the seat height so that your eyes are level with the middle-upper part of the windshield. Avoid setting it too low to prevent the steering wheel and dashboard from obstructing your view. 3. Adjust the seat headrest: Position the headrest as close to your head as possible, with the contact point slightly above your eye level.
7
5
Share

Where is the OBD connector of Dongfeng Peugeot 308 located?

The OBD connector of the older Dongfeng Peugeot 308 models is located in a small compartment under the ashtray in front of the front gear lever. Remove the black plastic panel below to see the interface. For newer models, the connector is inside the decorative panel on the lower left side of the steering wheel. Simply pull the panel outward with force to reveal the interface. The Dongfeng Peugeot 308 is a compact sedan. The first Peugeot 308 model was equipped with a 120-horsepower 1.6L inline 4-cylinder gasoline engine transplanted from the 207 model, paired with Michelin tires sized 215/55R16. In terms of safety, the Dongfeng Peugeot 308 offers multiple airbags, including rear side airbags and a driver's knee airbag, with ESP and traction control systems as standard across the entire lineup.
8
2
Share

How to Deal with Fogging Inside the Car?

There are two methods to deal with fogging inside the car: 1. Turn on the external circulation when fogging occurs inside the car. Introducing outside air into the car can remove the fog more quickly. Turn on the car's air conditioning cooling function along with the external circulation, and using the maximum airflow, it usually takes only about ten seconds to quickly blow away the fog on the glass. 2. To completely eliminate fog inside the car, you should choose to use hot air to blow the windshield. Similarly, first use the external circulation, select the air conditioning hot air and the front windshield air vent, wait for about 5 minutes, then switch to internal circulation or simply turn it off. In winter, using warm air to defog is more comfortable, but it takes longer to remove the fog with hot air compared to cold air.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.