What is the curb weight of the Chery Jetour X90?

How to Remove the Rear Seat of an Accord?

The method to remove the rear seat of an Accord: There are two clips under the rear seat. First, use your right hand to hold the clip, press the seat downward with your left hand, pull the clip outward with your right hand, and then lift the seat upward to remove it. The Accord's body dimensions are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. The Accord features an EPS electric power steering system, CMBS collision mitigation braking system, ESS emergency stop signal system, LWC blind spot display system, EPB electronic parking brake system, ABH auto brake hold system, VSA vehicle stability assist system, ACC adaptive cruise control system, HSA hill start assist system, and ACL active cornering light system.

20

4

Share

Do I Need to Replace the Wheel Hub When Changing Tires?

Replacing tires does not require changing the wheel hub. As long as the wheel hub is not damaged, you only need to replace the tires with the same size and specifications as the original ones when changing tires, and there is no need to replace the wheel hub as well. After installing new tires, since the old wheel hub has balance weights attached, it is advisable to perform a dynamic balance to prevent abnormal wear of the new tires and steering deviation. Tires, as components that directly contact the ground to bear the vehicle's weight and provide the necessary friction for driving, operate in extremely harsh conditions. They not only face exposure to sun and rain but also endure extreme cold in winter and high temperatures in summer. Under such severe working conditions, even the best tires are prone to aging and damage. To ensure driving safety, it is generally recommended to replace tires promptly when they are severely aged or damaged.

11

1

Share

Can 95 Octane Fuel Be Replaced with 92 Octane?

Cars designed for 95 octane fuel should not use 92 octane. If you accidentally use the wrong octane rating occasionally, simply switch back to the correct one after consumption. However, long-term use of the wrong octane rating can have the following impacts: For vehicles recommended for lower octane fuel, using higher octane fuel will not cause damage, but the increased octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. For vehicles recommended for higher octane fuel, using lower octane fuel can cause engine knocking. The significantly lower octane rating reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on pistons and cylinders, potentially leading to severe issues like cylinder scoring. Besides checking the recommended octane rating in the car's manual, you can also find it on the fuel cap. Generally, the engine's compression ratio can help determine the appropriate octane rating: vehicles with a compression ratio between 8.6-9.9 should use 92 octane, while those with a ratio between 10.0-11.5 should use 95 octane. However, with modern technologies, compression ratio alone may not dictate the required octane rating. High compression ratio engines can be tuned to use lower octane fuel due to other factors like ignition timing, turbocharging technology, or Atkinson cycle technology. Generally, higher octane fuel has a higher octane rating and better anti-knock properties. 92 octane fuel contains 92% isooctane and 8% n-heptane, while 95 octane fuel contains 95% isooctane and 5% n-heptane.

14

2

Share

What engine is used in the Soueast DX3?

The Soueast DX3 is equipped with a 1.5-liter inline 4-cylinder naturally aspirated engine and a 1.5-liter inline 4-cylinder turbocharged engine. The 1.5-liter inline 4-cylinder naturally aspirated engine is paired with a 5-speed manual transmission, delivering a maximum power of 88 kW and a maximum torque of 143 Nm. The 1.5-liter inline 4-cylinder turbocharged engine is paired with either a 6-speed manual or CVT continuously variable transmission, offering a maximum power of 115 kW and a maximum torque of 225 Nm. The Soueast DX3 has body dimensions of 4354mm in length, 1840mm in width, and 1670mm in height, with a wheelbase of 2610mm. The DX3 comes standard with a ten-in-one safety protection system, along with TCS traction control and ROP rollover protection, which is unique in its class. Even during sharp turns, it achieves safety standards comparable to those of sedans.

11

1

Share

What is the fuel tank capacity of the Roewe RX5?

The fuel tank capacity of the Roewe RX5 is 55 liters. If the vehicle is parked in direct sunlight or a high-temperature environment, do not fill the tank completely, as fuel expansion may cause overflow. The fuel filler pipe is designed to accommodate a sharp and long nozzle, and there is a cover plate at the neck of the filler port. By fully inserting the nozzle before refueling, this cover plate can be completely opened. The Roewe RX5 is an internet-connected SUV with body dimensions of 4545mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2700mm. The Roewe RX5 has launched three new models, with upgrades for two of them. Depending on the configuration, the new models will feature panoramic imaging, an electric tailgate, a panoramic sunroof, dual-zone automatic air conditioning, keyless entry, and one-button start.

3

4

Share

What is the function of a car air filter?

The function of a car air filter is to filter out dust and impurities from the air. After installation, it prevents dust and impurities from entering the cylinder, thereby extending the engine's service life. Without an air filter, dust in the air would directly enter the cylinder, increasing wear on the engine valves, cylinder liners, and piston rings, and shortening the engine's lifespan. Not installing an air filter may improve engine air intake slightly, resulting in a short-term increase in power. When cleaning, avoid using water or oil; instead, use the tapping method or the blowing method. The tapping method involves gently tapping the end face of the filter element to dislodge dust, while the blowing method uses compressed air to blow clean from the inside out. However, the number of cleanings is limited, as over time the air filter's ability to filter air will decline.

15

0

Share

What is the curb weight of the Chery Jetour X90?

How to Remove the Rear Seat of an Accord?

Do I Need to Replace the Wheel Hub When Changing Tires?

Can 95 Octane Fuel Be Replaced with 92 Octane?

What engine is used in the Soueast DX3?

What is the fuel tank capacity of the Roewe RX5?

What is the function of a car air filter?

What type of car is the Beetle?

What taxes are required when buying a car?

What to Do When Your Car Gets Stuck in Mud?

How to open the hood of the Lavida?